Cannon Office Equipment & Supplies - Page 5 - Recent Questions, Troubleshooting & Support
My cannon ir 2520 photocopy machine showing error E-0000004 how to fix it?
Replace the film ine fuser unit.1.Go through the following to clear the error: CLEAR > ENGIN > ERRCLR; and then turn OFF and then ON the power. 2.Check connection of the Connectors (Thermistor Connector and AC Connector). 3.Replace the Fixing Main Thermistor (Film Unit). 4.Replace the Fixing Assembly. 5.Replace the DC Controller PCB (PCB4).
How to solve blank copy error in cannon 6570
Hi, does the problem occurs only on copies? Are prints ok ?
if all ( copies and prints ) are blank , please check the primary charging corona and the transfer separation corona, corona central wire most be clean
How i can correct if error of 0000 from cannon 2520
Hi. You need to clear that error from service mode
with the copier turned on do the next secuence
press aditional function
press 2
press 8
press aditional function
when #sssw appear on the screen search with arrows in the touch panel until CLEAR appear on the screen
press ok once
and search with arrows until ENGINE appear on the screen
press ok once
ERRCLR appears on screen . press ok one more time
turn off the machine from main switch for a few seconds
turn on again and make copy test .
if problem persist replace the fixing heater.
please rate this anwaser if it was useful to you
Evrytime I try to copy with my cannon MX492 the stop button comes on and it wont print. Why??
Hello,
1, I would suggest you reset your Canon MX492 printer and see if the issue is resolved. If not, take it to the nearest Canon service center and get the hardware changed.
2, To reset, unplug all the connections without turning off the printer and provide the connections back after a few seconds. Allow the printer to function automatically if not, turn it on manually with the Power button.
Not finding what you are looking for?