Cannon Office Equipment & Supplies - Page 2 - Recent Questions, Troubleshooting & Support
Canon Pixma ip1000 dismantle
Depress power button while plugging the canon pixma ip1000. When you depress the power button, the printer can be used even if the in waste absorber hasn't been replaced.
My canon i960 is printing only green
I had this problem. If I tried to print a black& white photo on to glossy paper, it would only print green. When I tried on to plain paper using the 'fast' option, it printed in black. The reason for this is, on plain paper it uses the black cartridge, but output to glossy photo paper using the 'high' option, uses the mix of colours in your colour cartridge. If one or more of your colours has run out, you will get a print with the ink left in the cartridge. Replace the cartridge or refill it & your problem is solved.
Error Code: E197 0000 in cannon 2900 printer
Printer engine communication error
Erroneous communication between the DC controller PCB and image processor PCB was detected.
- Check the connectors of the DC controller PCB and image processor PCB.
Replace the DC controller PCB for normal connection. - Replace the image processor PCB.
E197 0000 Laser Driver PCB communication error
Description :
Description Error in communication with the Laser Driver PCB (communication data failure)
Causes :
Laser Driver PCB communication error
Solutions :
Remedy
1. Check the Laser Scanner Unit connector.
2. Replace the Laser Scanner Unit.
3. Replace the DC Controller PCB (PCB1).
My Cannon pixma 280 printer wont print it says error 5B00
What can I do?
The reason behind the canon printer error 5b00 is when the system continuously fills the ink tank and the printer stops to absorb that and hence we come to face this error.
Here are few steps which will help you in fixing
canon printer error 5b00:
1.Reset The Waste Ink System Count First: the first method to solve this error is to reset the waste ink. By applying this method you can get out of the error which is troubling you.
2. Manually clean the Waste Ink Foam: to clean the waste foam you have to open the front cover of the printer. Now you have to remove the cartridges one by one and then clean the rollers. Now check whether your error is gone or not.
So, these are the steps to solve the error. If you found the error is still there, then you have to visit an expert.
Not finding what you are looking for?