BYTECC Popular Questions, Answers, Tips & Manuals

To open the case of the BYTECC ME-350V4, you will need to remove the screws on the back of the case. Once the screws are removed, you can carefully lift the top of the case off to access the internal components. Be sure to take extra care when handling the case as it may contain sensitive components.

you can probably uninstall the drive in Device Manager ( dont delete driver ) then in device manager scan for new devices let it find and install the drive, it Should be fine. good luck

A drive that is formatted in the PC format that your machine can recognize and read. It will not work with Mac stuff.

I'm not a Mac tech, but I wouldn't see why not. Floppy drives are kinda old school now. You may need a driver for the floppy. Check online and see what you can find. Download and install it. Or you may have to plug the floppy in, then reboot, to get the Mac to recognize it, especially with a USB port. Some old Windozz machines were like that...maybe your Mac too???? Mac OS is very close to Linux/Unix systems, which have awful support for floppy drives. That's another possibility. If your windows machine can't read the disk, makes me think the floppy drive is bad or you have corrupted files on the disk. Try a couple known good floppy disks on the Windoz box and see what happens. Or another removable floppy drive. They cost $5 to $10 now.

OK, as far as I understand it: Ibm usb portable diskette drive cn533 It's a statement.Not a question. What about it, you're looking to buy one, or is is making noise, or does not work...

Depends on where you live. Look at the back of your drive or on the old adaptor for the requirements (5v/1a or 12v/.... or something else) or take these parts to the next electronics shop or computer repair shop. A new one should only cost a few bucks.

I recommend you this post wich is done by Windows "Automatically get recommended drivers and updates for your hardware"

Better to buy a new hard drive. IDE drives nowadays are mostly found on surviving old pc's. They are slow and usually of low capacity. I feel that any money spent would be better directed at replacing the hard drive.

light only appears when accessing data from disk. Check that you have right drivers... that is it.

Look to see if it shows up in your device manager. If there, delete and reinsert it from scratch. See if the drive hums once when you plug it in (recognizing it). USB cable might be broken inside if it does not register.

I think the one should try an attempted to install the reverb mod and the tone stack capacitors. that's all I can say at the moment. I think that will be helpful. http://mhelpdesk.com/

http://guides.macrumors.com/Formatting_an_External_Device

I NEED ONE AS WELL...This is the first computer item I have purchased without a manual. I can not even find a download for the manual. HELP!!!!!!!!!!!!!!!!!!!!!.

you obviously want to scrap it for magnet or aluminum, so bashit with hammer and split with chisel, etc.

Hi, It should just plug in and work. To the best of my knowledge these come with no manuals.

Any junk yard or car Honda dealer should know. We had a 1992 and both the ECU and the TCU under the feet of the passenger under the dash behind a metal panel. When sitting in the passenger seat normally your feet rest on a sloped floorboard. Pull back the floor mat and look under there. Might also be behind a panel to the right of the passenger's feet, a vertical panel.

check the drive is visible to windows...control panel>administrative tools>computer management>storage>disk managementit will list all drives (even ones you can't see in explorer)assign it a drive letter and make it active from there.

you might be installing the driver through the right process
click start right click on computer select properties device manager scroll through all of your devices if you see a yellow question or exclamation mark ? ! or a red X you will need to update the drivers for this device right click select update driver/reinstall driver if you can see your usb device but its not working scroll to Ports(Com&Ltd) right click to update driverhope this helps you

http://download.cnet.com/tt56install-3-zip/3000-2109_4-124957.html driver package154.69MB http://download.cnet.com/tt4h-s-j2569r-zip/3000-2109_4-207099.html driverpackage 490MB if these driver packages are not right http://download.cnet.com/2000-20_4.html on the home page you should see a search tab just type in what you are looking for (be precise)also the download software finder under that there will be a list place a tick in the box of any one you want/need all software windows software mac software mobile and web apps

http://majorgeeks.com/downloads35.html

also this link will provide you with many freeware and share drivers

hope this helps you

Open the external case, by removing some screws, and sliding the cover away from the insides.
Connect your disk-drive to the "power" and "data" connections, and secure the disk-drive with the mounting screws. Close the case.