byD sign Televison & Video - Recent Questions, Troubleshooting & Support

Look for a TV repair shop in the vicinity of where you live.

They should be able to get the parts for your specific tv and perform the repair.

Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. http://electronicshelponline.blogspot.com/ In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary. Before going further; try a hard reset first. If it does not help you, replace the main digital board. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; visit the site linked here.

I am assuming this is the board you need... I would take the old one out and see if it is the same part # first! Byd 40 4032 782 L40D11 6900 Terminal Board Unit

Refer its user manual for details.

eweewew

Dumb answer, but have you turned down the thermostat to a lower setting?

Press Accept or replay

I have a solution for this

Bruce

Look behind the TV there is a switch you might try that might of got hit. I cant remember what its for as my tv did the same thing.

Hi, the solution is to have another email adress to reset your password of your first email adress. I suggest that you create an email account with AOL or Google. Then from the login page of your first email, you ask your password to be reset and then you give your second email adress to receive your new password. If not clear, let me know!