Bugaboo Baby Gear - Popular Questions, Answers, Tips & Manuals

https://www.youtube.com/watch?v=_Yk2lWttG8E https://www.youtube.com/watch?v=-1F4u37rDxI https://www.youtube.com/watch?v=uafnB7imShg

WTF is a bugaboo frog???

my suggestion , would be to find a lawn mower repair shop (that's not too busy out of season) and nicely ask the attendant to make you a new brake , believe it or not , lawn mowers use a lot of similar things that strollers do (wheels, cables,tubing ,Etc.), and chances are they can with a bit of time make you something to work from what they have lying about . as this model is as you said .discontinued and no new parts are available

Gen 3 is prone to the pins in a plastic disk inside the hub breaking off. I make 3D print replacements and have a video about this on www.shapeways.com/shops/bugabooparts

30mm to 50mm of movement is in the normal range for a Bugaboo as the handle is not fixed to the chassis like most strollers. It has a rotating central joint. 1mm of movement in that joint becomes 10mm of movement at handles end. More important is to check both sides lock in the same places. If there seems to be gaps or movement between the four hub sections you can tighten then up by using a large socket from a socket set. Put it over the dome so it only touches the edge of the dome then use a hammer to tighten the down down.

Yes the hood clamps are the same for gecko, frog and cameleon

Unlikely you'll find the list that do here www.bugaboo.com/US/en_US/strollers/car-seat-adapters

Old clip just pulls out with pliers if it's jammed. Hard part is finding a new clip. Try eBay or face book. I sell them but have to post them from New Zealand. Google bugaboo repair guy.

Boomarang.

Maybe a bit wd40 would help losen things up a bit

Check all the wheels. Sounds like one is broken or has a bad bearing in it. Try In that case you'll have to order a new one and replace it. In looking at reviews for this buggy, it seems like a common issue.

all bugaboo strollers came with swivel front wheels . There is a white sliding button on the front of the swivel assembly that locks the swivel action. The swivel castors are only on the front but can be assembled incorrectly on the rear of the stroller go to google and type in base.bugaboo.com and there is a pdf manual for the strollers.including how to assemble and the wheels and castors.

Hi We'd recommend you contact Bugaboo for assistance with this - bugaboo mobility concept creators strollers United states English

Hi We'd recommend you contact Bugaboo for assistance bugaboo mobility concept creators strollers United states English

Please contact Bugaboo for assistance

You may have a puncture you would find and fix this the same as a bike tyre. Pump it up take out the inner tube find where the air is leaking from (sometimes submerging in water helps as you can see air bubbles coming from hole) then fix with a puncture repair kit

Hi, We recommend you contact Bugaboo for assistance support bugaboo United states English

Please contact Bugaboo for assistance support bugaboo United Kingdom English

Please contact Bugaboo for assistance

Hi Marjorie Please contact Bugaboo directly for assistance contact support bugaboo United states English