Washing Machines - Page 7 - Recent Questions, Troubleshooting & Support


F09 is "overflow failure" - check drain pump, pressure switch, blocked drain.
FA is the emergency shutoff switch that detects when water is pooling underneath the machine.

Whirlpool... | Answered on Jan 18, 2019


That error is for incoming water pressure. Makes sure water valves are wide open and hoses arent kinked. Might check inside hoses for lime build up on screens.

Washing Machines | Answered on Jan 18, 2019


Hi. I found this link, https://www.youtube.com/watch?v=wcBosxT6Ujk although it's rather long and complicated. He does make the point, however, that often problems with a washing machine emptying are because the pump is blocked. Personally, rather than opening up the whole machine, I find it easier to tip the machine about 45° and get a plastic bowl underneath to catch the water when you take off the pump hose. To do this you will need pliers to open the spring clip on the relevant hose.
But, yes, it can be a lot of water, so it's better to keep the pipe ready to put back halfway through, so you can empty the bowl, then resume. Have fun!
Hope this helped.

Frigidaire... | Answered on Jan 18, 2019


E9 error code means pressure sensor failure. This sensor is used to know water level in the tub. The problem with the sensor requires a part replacement. IF under warranty have it serviced by a factory authorized service tech.

Washing Machines | Answered on Jan 18, 2019


Reduce load size. Make sure machine and floor are level. Suspension rods may be worn.

Whirlpool... | Answered on Jan 18, 2019


Let it run and see if it finishes. Get an appliance repair pro to look at it. if this is a new machine it will be warranty covered.

Whirlpool... | Answered on Jan 18, 2019


Fixya is unable to suggest sources for a water valve for a Bendix wds1043.

Tricity Bendix... | Answered on Jan 17, 2019


Not enough information on the problem for me to answer. I would say you need to have it checked by a professional instead of blowing power supplies.

Washing Machines | Answered on Jan 17, 2019


check your wash program selection check tap on at cupboard

Amana Washing... | Answered on Jan 17, 2019


multi plug on motor is loose

Washing Machines | Answered on Jan 17, 2019


motor multiconnector needs cleaning refitting

Washing Machines | Answered on Jan 17, 2019


water pump stuck such as coins or a sock inspection port at frony usually if its a zanusi then your water supply is off

Washing Machines | Answered on Jan 17, 2019

Not finding what you are looking for?
Washing Machines Logo

255,129 questions posted

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Marvin
Marvin

Level 3 Expert

83850 Answers

Brad Brown

Level 3 Expert

17827 Answers

paul
paul

Level 3 Expert

825 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...