Tools & Hardware - Others - Page 8 - Recent Questions, Troubleshooting & Support

All the other answers are wrong. You get a wrench with the sander. It's thin so it fits between the pad and sander to hold the nut in place while you unscrew the pad.

i need all vikings orientation in full

Most body shell panels on power tools are put together in a set order and often have one or more hidden screws. These are sometimes hidden behind stickers. Other sections are sometimes held it place by hook clips that are moulded into the plastic panels. These need to be Gently levered apart. DO NOT force any sections apart as this will damage the shell making it unsafe to use.

Hi, I'm seeing that that product use at least 1/4,1/2 and 9/16 inch staples. You can confirm this with craftsman by calling them at (888) 331-4569 . Thank you.

Arrow T-50 heavy-duty staples 1/4-in to 3/8-inch

No Parts available Juanita. Just buy a new one for $12! https://www.google.com/search?q=hyper+tough+heavy+duty+hand+staple+gun+parts ..

Question edited for clarity. make model (what it is) Question moved from Office Equipment. So secretive, they won't tell you! E 24 E 25 E 27 E 50 Switch off unit! Notify Customer Service. Page 39 refers http://begocanada.com/wp-content/uploads/2018/04/Fornax-T-Manuel-utilisateur-86067-EN-Serie-359.00377.pdf Not in the Service Manual either, stops at E27 http://www.medteh.info/_fr/103/Service_Manual_.pdf .. ..

Hi, you might have a stapler jam. Please unplug your stapler and use a screw driver to clear out any staples in the stapling area. Then, you can pull out the stapler drawer and remove any jammed or stuck staplers. If this fails, please call Bostitch at 1 (800) 556-6696 if you don't have a manual to use to attempt next troubleshooting steps. Thank you.

https://toolsmirror.com/nail-gun-not-shooting-nails/ This article may help you find the problem.

Question moved from Cars and Trucks Contact them and get the machine serviced. https://www.lelo.com/contact-us ..

rotary hammer with chipping moved you to Hilti it is not a car or truck

Home Depot and Lowes have them.

ask maker this. (or seller) the lathe came with a manual , lost that/ and on the last page it shows contacts list , read that ? or google for makers support. moved you out of cars to tools.

Hi David,I have searched for this this manual and this is what I have come up with.Campbell Hausfeld own the Husky brand.This link is for an IFN2190 which may be the HFR2190 rebranded as "Iron Force". The specific HFR2190 manual doesn't appear to be available.http://powertool.manualsonline.com/manuals/mfg/campbell_hausfeld/ifn2190.html?idRes=1235852If it doesn't suit your nailer you can cancel the $12 feeHope this helps.

I would look at the head switch - this is located inside the tool just blow the trigger switch in the handle. There is a slide switch with a spring that actually makes the switch - make sure this is not broken and is in the correct position. Also, check the fan connector in the head, I have seen these loosen up and back out. If these don't solve the problem, I would suggest your problem is the molded circuit assy that contains the trigger switch and the head switch.

what color is the light when you insert battery? then what color is it when you try and fire the tool? you could have a couple problems, first does the light even come on? If not the battery contacts might be bad. second you got light but no fan, could be a spark plug wire, bent lower probe circuit board bad and lastly bad fan motor. Let me know about the lights first and we will go from there

This can happen if you accidentally depress the spindle locking button while the tool is running -- a common problem since Dremel did not include any type of interlock to prevent it, and the button is right where you'd hold the tool for best control. If that happens, you probably will need to replace the tool or send it to Dremel for repair.

Depends on what you have, but if you need to shut off the engine to shift into the gears then you have a problem with the clutch assembly not releasing. Could be needing a new clutch disc or pressure plate or a simple adjustment on the clutch linkage or if it is hydraulic clutch bleed the system or replace the master and or slave cylinder.

I'm needing bearings for a model 2403016 6"belt & 9"Disc sander. NSK 257-6201v. 7/16 boar NSK 6202z. 6202N. 1/2 boar can you help me