Televison & Video - Answered Questions & Fixed Issues

1. Yes, it has 2 speakers with 2 x 10 watts power. Check the link below for the specs:

2. I couldn't find a way to access the menu without a remote

3. Try these codes and it might work for your universal remote control:

007, 008, 009, 021, 026, 028, 029, 032, 033, 040, 041.

Hope one of these codes work with your remote control.

Fujitsu... | Answered 1 hour ago | 69 views

The Hitachi LE49S508 red LED lights up when the TV is in standby mode. The LED will be off when the TV is on or has no power. If you haven't tried the front panel buttons, check if the TV will turn on when you press the lowest button (Power) on right side of the TV. If this works and your remote doesn't, you may have a problem with the remote or the IR receiver. (You can check the remote by having someone take a picture of the front of the remote when you press a button. There should be a flare of light visible in the picture.) If your current source is a PC, make sure that the computer is on and hasn't gone to sleep. Otherwise, the TV main board is not getting power from the power supply or not responding correctly to the commands.

Sears Parts Direct has the owner's manual for the LE49S508 here: . To download the manual, the current link is . A few parts for this TV are available here: .

I hope this helps.

Cindy Wells

Televison &... | Answered 2 hours ago | 12 views

Use Goo Gone. It will remove it.

Televison &... | Answered 4 hours ago | 13 views


Samsung... | Answered 7 hours ago | 22 views

i found that using the assisted setup i was able to connect wifi. try doing this. i also have qwest so i have the password. also make sure you have the wlan plugged in to the tv lol

Toshiba 40UX600U... | Answered 11 hours ago | 807 views

you have to call showmax

Televison &... | Answered 13 hours ago | 18 views


Televison &... | Answered 14 hours ago | 18 views

Try to turn your ac without the remote. I think you can do that then make sure you are in cool mode. If the compressor does not run then you can check:

1. Overload relay. It is usually locate on the top of the compressor. If it dead then there are some reasons cause the dead. You need to be very careful before replacing it.

2. If the compressor runs then your remote issue.

Universal... | Answered 15 hours ago | 20 views

Setting your roku device is very easy. With roku setup, you will be able to enjoy your favorite movies, TV shows, songs, etc. Basically It is a series of random numbers that will be shown on your TV screen when you will connect your Roku device to TV. All you just need to visit roku com link web address and enter the Roku Activation Code. Now, you can start to watch Hulu, Netflix, HBO, TBS, TNT and other channels.
Visit for more information.

Roku 2 XD... | Answered 15 hours ago | 42 views

Use the App Search feature.

JVC Televison &... | Answered 17 hours ago | 472 views


Televison &... | Answered 17 hours ago | 19 views

MX player

Televison &... | Answered 18 hours ago | 48 views

This is a replacement for the original.,ss:44&prmd=sivn&prds=num:1,of:1,epd:8386569001855149188,paur:ClkAsKraX4gK3_SS9e9ZSpTGU4YW9IJKKcn_NZBjsRsh82t08uhjIOhp3tmgjgNxQ9je41jlN_X3jMEDOk4t08HBs0R_Y21IJH8ykhcw29VT4gytXxNr8F-mDBIZAFPVH7291hLWdhez53LRv5Umzt6MjhCgIA,prmr:1,cs:1

Universal... | Answered 20 hours ago | 15 views

Your television source has been changed to OTA and is tuning in the digital channel 2-1. Depending on the TV, there will be a source or input button on the original remote. You either press this button several times to change the source or you use the arrow keys to navigate through the list. You may need to press OK/Enter to confirm the selection. Some TVs also have a source/input button among the TV front panel buttons. Again you press the button several times or use the arrow key equivalents on the front panel to navigate through the list. On a few TVs, changing the source may be inside the on-screen menu. If you have a universal remote, it may match the source/input function. However, this depends on if the best code is programmed. (Some codes for a given brand don't match all of the functions for a given TV.)

Please add a comment with the make/model and the remote (if not the original remote) if you need help changing the source.

Cindy Wells

Televison &... | Answered Yesterday | 19 views

If your television has a Browser, yes you can.


Televison &... | Answered Yesterday | 15 views

There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here. Pull up older posts.
Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done.

Sony Televison &... | Answered Yesterday | 400 views

Not finding what you are looking for?
Televison & Video Logo

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76030 Answers

Cindy Wells

Level 3 Expert

5799 Answers


Level 3 Expert

84027 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides