Scuba Diving & Snorkeling - Recent Questions, Troubleshooting & Support

ask them maker for that or google all week, get lucky?

Question edited for clarity and add maker. Question moved to a better category. Some report the light being on, but causing no issues. https://www.google.com/search?q=2011+King+Quad+750.+EPS+light+is+on ..

If you can draw go for it :)

Salva,

The error in pressure is actually a "feature" of Suunto computers. Suunto is probably one of the most conservative brands out there, and many experienced divers tend to stay away from them for that very reason.

The manual actually calls out this "feature" on page 27.

The remaining air time calculation includes a 35 bar/500 psi safety reserve. This means
that when the instrument shows the air time to be zero, there is still about 35 bar/500 psi
of pressure left in your cylinder, depending on your air consumption rate.

http://media.suunto.com/media/suunto/manuals/en_US/cobra2_usersguide_en_v3_m56577569830698583.pdf

Regards,
Darlene

http://www.youtube.com/watch?v=ZaktqZSPmtsHere is a quick 2-minute video that will explain how to loosen the straps on your snorkeling mask, and tell you many other useful facts about snorkel masks. If your mask is a different model, you can look at the related videos on YouTube and find one that has straps similar to yours.

It would be very difficult and foolhardy for anybody to make a personal diagnosis over the internet without knowing your particular medical issue. I strongly recommend that you speak to your doctor/specialist direct. It would be terrible to get a false diagnosis from here. On a personal note I do wish you the best of luck.

try leaving battery out for 15 to 20 minutes, if no help placing the battery, if not working then send in for repairs

Obviously, that should not happen. You have to spend the time making sure the fit is perfect.

Make and model may help you get an answer.

I would say no, because it is too dangerous. Although you are near the surface, when you want the clear it, you need the confidence to know that it will. Keep the mask, buy a new snorkel.https://www.google.com/search?q=Old+mares+snorkel..

Hi,

To access a downloadable manual you will need to go to the below link and create a login for yourself which will give you access to the manual.

http://www.genesisscuba.com/manuals.php

Hope this assists you.

Best regards,

Dave

Try to spray the commercial available mist to lower surface tension in order to avoid build-up of condensed water

Needs a seal rebuild kit.... They are simple to do, open the regulator up first and check that there isn't any salt or dirt inside

Most straps are universal. But if you want an exact replacement just seach www.usdivers.com for your local US Divers retail store.

it depends on the quality of the mask and it depends on how you stored it (if you leaved it at sunlight, if you washed it thoroughly after using it in the sea...) i have a mid quality mask Mares mask, i have been using about 20 times for snorkeling, then i used it to take diving certifications in pool, then i used it for about other 20 dives in the sea... i always stored it in a dark bag (the mask is now about 8 years old) you can check if you mask is still in good shape, and the silicone has not worn out, in this simple way: just put the mask on your face without straps.. remove all the air inside the mask by inhaling with your nose.. then look at your feet (keep inhaling): if the mask remains on your face you can keep using it

Hello, this is not an error code that can be reset, you will need to send/take it to an authorised scuba service centre. Hope that helps.