Saws - Page 3 - Answered Questions & Fixed Issues
Is there any brand to replace Delta splitter table saw part 1313277
This video says another Delta fits
8,198 views
May 19, 2019
After getting my contractor table saw (base model 36-451) out of storage, I noticed my splitter and guard was missing (go figure). I really wanted the kickback protection while cutting narrow parts, so after long time searching, I found the Delta 34-868 drop-down splitter. It did say it would fit my saw, but the screws were the wrong size. Watch the video to see how I overcame it and how it performs. I love it...
And this is it
DELTA 34-868 Bracket and Splitter Assembly
Amazon.ca
https://www.amazon.ca > DELTA-34-868-Bracket-Spl...
With anti-kickback fingers it provides protection for all sawing operations, disappears below table for dadoing and other non-thru cutting jobs ...
Rating: 4 · 84 reviews · $127.55 · In stock
10/6/2023 4:23:04 PM •
Delta Saws
•
Answered
on Oct 06, 2023
•
45 views
How to install drive belts on a craftsman table saw model # 218290?
Remove the side panel (key number 21) the dust cover (key number 23) guide holder (key number 29).
Use a 19MM or a 3/4 inch deep socket with a long extension and ratchet. This will keep your hand out of the way.
Now rotate the arbor counter clockwise and deflect the top edge of the belt downwards onto the arbor to catch the grooves.
Continue to work the belt around and checking at the motor shaft.
Once the belt is in place work it down by deflecting the top edge of the belt.
reference > http://www.searspartsdirect.com/partsdirect/part-model/Craftsman-Parts/Saw-Parts/Model-315218290/0247/0744600?pathTaken=&prst=0&shdMod=315218290
8/8/2023 7:21:48 PM •
Craftsman Saws
•
Answered
on Aug 08, 2023
•
38 views
Rockwell 14 Bandsaw #28-20C
Your question is ................................................................. ..
7/24/2023 8:47:48 AM •
Saws
•
Answered
on Jul 24, 2023
•
35 views
Where does the return spring attach to?
To reattach the return spring on your Hitachi C12LSH miter saw, follow these steps:
- Ensure that the miter saw is unplugged and turned off for safety.
- Locate the yellow protective cover on the miter saw. This cover is designed to shield the blade when the saw is not in use.
- Look for the small metal hook or attachment point on the yellow cover where the return spring should be connected.
- Inspect the return spring itself and identify the end that needs to be attached to the yellow cover.
- Align the end of the return spring with the attachment point on the yellow cover.
- Apply pressure and securely attach the end of the spring to the attachment point. It may require some force to hook the spring into place.
- Once the spring is properly attached, test the yellow cover by pulling it away from the blade. It should spring back into place when released.
If you are having difficulty locating the attachment point or need further assistance, consult the user manual for your Hitachi C12LSH miter saw. The manual should provide specific instructions and diagrams for reattaching the return spring. If you don't have the manual, you can usually find it on the manufacturer's website or by contacting Hitachi customer support.
7/2/2023 5:43:55 PM •
Hitachi Saws
•
Answered
on Jul 02, 2023
•
95 views
Not finding what you are looking for?