Refrigerators - Page 5 - Recent Questions, Troubleshooting & Support


Check to see if the bale is caught on an ice cube. The bale senses the level of ice cubes in the bin. Sometimes an ice cube will get stuck, keeping the bale up which stops the whole ice making process. Sometimes this will cause the water feed to freeze. If you can get at any of the tube to feel if it is frozen (crunchy ice inside) hit it with a not-too-hot hair dryer.

GE Refrigerators | Answered on Jan 18, 2019


You should hire an appliance repair person to do this job. I have to assume you want to replace the lever with a new one. It is better to pay a pro than get into a problem deeper than you can fix on your own and have to hire a pro anyway.

Refrigerators | Answered on Jan 18, 2019


Pretty vague question, but based on what you've asked I would say you need to replace or repair the tube. If you are talking about the tube that supplies water to the ice maker, you might be able to trim the leaking section and reconnect the good section to the valve. Hope that helps.

Refrigerators | Answered on Jan 18, 2019


Verify the water supply is open and that the tubing is free of obstructions.

Neff... | Answered on Jan 18, 2019


this will creat feedback run all through 2 duel pole relays protecting run return supply easiy enough just protect system supply individual supply and short

Refrigerators | Answered on Jan 17, 2019


Hi,
With refrigeration pressures that will vary greatly with the temperature.
When downn to proper cool temperatures the low will be around 10-15 and the high side 150 or so

heatman101

Sub-Zero 632 / S | Answered on Jan 17, 2019


I would go for 40 on the suction and 150 discharge, or divide the locked rotor current by 6 and charge so the current is 1/6 of the locked rotor current of the compressor, or by temperature/pressure relation 110* discharge and 35* suction, or get the suction line sweating. The best way is to remove all the refrigerant and then weigh the refrigerant the system is designed for on these critical charge appliances.

Amana 22.6 cu.... | Answered on Jan 17, 2019


Replace air baffle assembly

Samsung... | Answered on Jan 17, 2019


The water is supplied through a hole in the floor usually behind the fridge. Replace the plastic pipe from the water source to the fridge. That may take care of the problem!

Refrigerators | Answered on Jan 17, 2019


Take 2 wires you removed from old switch and place on new switch. With only 2 wires, it doesn’t matter which one goes to either terminal.

Whirlpool... | Answered on Jan 16, 2019

Not finding what you are looking for?
Refrigerators Logo

171,226 questions posted

Ask a Question

Usually answered in minutes!

Top Refrigerators Experts

John Tripp
John Tripp

Level 3 Expert

4655 Answers

Marvin
Marvin

Level 3 Expert

83850 Answers

Brad Brown

Level 3 Expert

17827 Answers

Are you a Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...