Pool & Spa - Page 6 - Answered Questions & Fixed Issues

1. Check the air sensor: The first step is to locate the air sensor and check for any visible issues. Make sure it is properly connected and not damaged.
2. Check the wiring: If the air sensor appears to be in good condition, the problem may be with the wiring. Check the wiring for any loose connections or damaged wires. If you find any issues, you may need to repair or replace the wiring.
3. Check the control board: The control board is responsible for managing the various functions of the pool heater. If the control board is malfunctioning, it can cause the air sensor to short out. You can check the control board by testing it with a multimeter. If you suspect the control board is the problem, you may need to replace it.
4. Check the air intake: If the air intake is blocked or restricted, it can cause the air sensor to short out. Make sure the air intake is clear and unobstructed.

make sure wired correctly if ok check fuse on main board also check circulation pump and pressure switch also temp sensor

check wiring

I have same issue, reading 103/104 but barely 80 degrees. Im guessing tstat went bad how can the gfi plug cause this? are you referring to the actual gfi plug for outlet?

Question moved from Cars and Trucks.Does the pump motor have a control board that is not on the main spa board? Sometimes they are on the motor, sometimes not.'Full 'make model (what it is)' in all questions please as first three words.

Eontact them direct. This is an unknown, undocumented fault but am guessing EE is Electrical Error.

Suite Collection - Owner's Manual PU2 - Dream Maker Spas

https://dreammakerspas.com > uploads > 2019/02 PDF Always keep an accurate thermometer in the water because your spa's thermostat may be in error. Use a high quality, shatterproof. Missing: EE ‎' Must include: EE

• Resources for DreamMaker Spas owners

  https://dreammakerspas.com > owners Nov 11, 2022 - Find resources for Dream Maker Spas hot tub owners: technical videos, Dream Maker Spas Manuals, warranty information and more.

• Cabana 2500L Suite - DreamMaker Spas

  https://dreammakerspas.com > Shop Recline in the deep contours of the Cabana 2500 and experience all the all inclusive suite spa where everything is included.

There are many types of swimming pool alarms. Let’s examine each one of them: Gate or Door Alarms They are composed of a magnetic sensor that is placed on the door to the pool. If the door is opened while the pool gate alarm is activated, it will give an alert to the parents. If you have a gate, it’s essential to have one of this, but should not be considered as the only surveillance tool. Perimeter Alarm It is composed by an array of sensors that are placed around the pool. That way, if someone trespasses it, it will give an alarm. Although it sounds as a perfect system, it has some limitations since it needs to be adjusted to your child’s height. What about visitor’s children? Additionally, one of the sensors could be moved by an animal, wind, rain or snow. Wrist Alarm They have become one of the preferred methods to control children. It is a waterproof device that is placed around the wrist of your child. That way, if he falls inside the pool, it will send a signal to the station, which will give an alarm to the parents. The two disadvantages of this product are that it is expensive and requires the child to use it all day long. Floating Sensors These devices are placed in the pool and detect the motion of objects inside the water. Although practical, a floating pool alarm is a bit expensive. Their main disadvantage is that if the sensor is removed from the water, there is no way to know if something is happening at the poo

You need to remove the impeller 1st.....there is usually(not familiar with your particular pump) 2 sets of exterior accessible bolts. One set separates the front and rear of the pump(where the impeller is), and where the motor meets the pump(where it sounds like you have). https://www.youtube.com/watch?v=mpJLp3oWDGU I hope this helps.

Is the front of the motor where it connects to the pump round or squared with "ears " at the corners where the bolts are? Also, it is a 1HP correct? If it's round, any 56J c-flange motor will work and if it's squared, a 56Y is the replacement. I order most of my replacement motors from Poolsupplyunlimited.com because they have great pricing and additional warranties that cover far past the manufacturers 1 year warranty.

limited info generic answer need a multi-meter to test circuits usually heater failure or pump failure but the relays and circuits can get critters or condensation damage

What does the LCD Screen say? Does it say display not active?

Do you have an Easy Touch Controller?

Yes, the water must be circulating rapidly when the heater is on from being cold. Once hot, it can just circulate gently.

Salt generators take, on average, around 24 hours between adding salt and the system realizing or analyzing the data. A code 92 usually means salt levels are too high, but not always. It is best to take a water sample to a pool store for analysis to truly determine if that's the case. If so, draining some water and adding fresh water are the only real ways to rectify the salinity. Best wishes and hope this helps.

possible heat element bad or temp sensor

possible bad temp sensor

go into system set up and turn on on remote

Hello quick question I just bought the same exact Suana today. Does it take a long time for it to heat up .?