Garden - Page 7 - Answered Questions & Fixed Issues
I have a shibaura P 17 F & the hyd pump not working.
I'm sorry to hear about the issue with your Shibaura P17F hydraulic pump. When facing problems with the hydraulic system, it's crucial to systematically troubleshoot potential causes. Start by checking the hydraulic fluid levels to ensure they are at the recommended level. Inspect for any visible leaks around the pump, hoses, or connections, as leaks can lead to a loss of pressure. Additionally, examine the hydraulic filters for any signs of blockage or contamination, and replace them if necessary. Verify the condition of the hydraulic hoses for damage or kinks, and bleed any air from the system that might be affecting pump performance. Testing the hydraulic pump's output pressure with a gauge can help identify if the pump itself is malfunctioning. Refer to the equipment's manual for specific guidelines and, if needed, consider consulting a professional technician for a more in-depth inspection and repair.
1/14/2024 5:36:01 PM •
Garden
•
Answered
on Jan 14, 2024
•
110 views
My karcher K7 seems to keep blowing the fuse in my extension cable..any ideas ??
The following methods, according to Check Appliance, may help you address the problem:
- Check that the cable is inserted into the power socket and that the power switch is switched on.
- Check to see if connecting into a different power outlet makes a difference.
- Check that your extension wire is no longer than 10 meters (30 feet).
- Check to see whether the fuse or circuit breaker needs to be reset.
If these methods do not solve the problem, it is conceivable that the pressure switch is malfunctioning, causing the motor to draw too much current and blow the fuse. You should inspect the pressure switch for evidence of damage or dysfunction.
1/14/2024 11:21:43 AM •
Karcher Garden
•
Answered
on Jan 14, 2024
•
1,172 views
Lost all power on my John Deere D160
limited info generic answer pop can be anything check fuse and solenoid --check for spark --fuel to narrow down problem --no spark electrical problem --no gas fuel problem
1/8/2024 1:39:12 AM •
John Deere...
•
Answered
on Jan 08, 2024
•
228 views
What does it mean when my worx battery charger has a solid red light.
according to manualslib type site for the wg540, solid red means charging for the wa3840 and wa3838. After 30 minutes if battery has not reached 10 volts (of 18), the red will begin flashing meaning defective.
Just green? Ready to go. Green flashing? Overheat.
Tangent; sometimes a discharged battery needs a little coaxing - have to get a little voltage into the battery for charger to try to charge. Different company, electric drill. I plead ignorance if this applies for the 3840 since they mention the half an hour time.
Diaphragm pump keeps jamming am experiencing engine cut-off can it be isolated?
All questions need full 'make model (what it is)' first 3 words. Or we are working blind and making educated guesses.
Carburetors don't need 'timing', they are simply a device for mixing fuel and air into aerosol form.
Diaphragm pump can be stripped, serviced, diaphragms changed or the whole pump replaced.
..
1/2/2024 6:22:33 AM •
Garden
•
Answered
on Jan 02, 2024
•
30 views
Not finding what you are looking for?