Garden - Page 6 - Answered Questions & Fixed Issues
Where can i buy a nylon head for a stihl fe 55 weed eater
I have been trying to find a new Trimming head for my Stihl FE 55 for about 4 years now, with no success. A British company say that their part no. 400471021932 fits my machine. I'm in South Africa but, and need to source one here.
2/6/2024 11:13:37 AM •
Stihl Garden
•
Answered
on Feb 06, 2024
•
209 views
Cub Cadet 1050 2014 model. The gas pedal locks in the down position until engaging the break.
If the gas pedal on your 2014 Cub Cadet 1050 model is locking in the down position until the brake is engaged, there may be an issue with the mower's safety interlock system. This system is designed to prevent accidental engagement of the blades when the operator is not in control. Check for any debris or obstructions around the pedal mechanism and the brake system. Additionally, inspect the safety interlock switches near the brake pedal for proper function. If the issue persists, it's recommended to consult the owner's manual for troubleshooting steps or seek assistance from a qualified Cub Cadet service professional to ensure safe and proper operation.
LT 100 craftsman riding lawn mower 17.5hp what all can cause the engine to turn over slow?
Clean the battery posts and the connectors with a wire brush and then smear them with Vaseline. Tighten the connectors well. Take of the negative ground to the chassis and do the same with that.
Also take the battery to an Interstate Battery outlet and ask them to load test the battery. Voltage is one thing but Cold Cranking Amps (CCA) is the important part of a battery. They do it for free and it takes 2 minutes, and you get a printout, CCA on the battery to CCA Actual.
..
I have a shibaura P 17 F & the hyd pump not working.
I'm sorry to hear about the issue with your Shibaura P17F hydraulic pump. When facing problems with the hydraulic system, it's crucial to systematically troubleshoot potential causes. Start by checking the hydraulic fluid levels to ensure they are at the recommended level. Inspect for any visible leaks around the pump, hoses, or connections, as leaks can lead to a loss of pressure. Additionally, examine the hydraulic filters for any signs of blockage or contamination, and replace them if necessary. Verify the condition of the hydraulic hoses for damage or kinks, and bleed any air from the system that might be affecting pump performance. Testing the hydraulic pump's output pressure with a gauge can help identify if the pump itself is malfunctioning. Refer to the equipment's manual for specific guidelines and, if needed, consider consulting a professional technician for a more in-depth inspection and repair.
1/14/2024 5:36:01 PM •
Garden
•
Answered
on Jan 14, 2024
•
109 views
My karcher K7 seems to keep blowing the fuse in my extension cable..any ideas ??
The following methods, according to Check Appliance, may help you address the problem:
- Check that the cable is inserted into the power socket and that the power switch is switched on.
- Check to see if connecting into a different power outlet makes a difference.
- Check that your extension wire is no longer than 10 meters (30 feet).
- Check to see whether the fuse or circuit breaker needs to be reset.
If these methods do not solve the problem, it is conceivable that the pressure switch is malfunctioning, causing the motor to draw too much current and blow the fuse. You should inspect the pressure switch for evidence of damage or dysfunction.
1/14/2024 11:21:43 AM •
Karcher Garden
•
Answered
on Jan 14, 2024
•
1,170 views
Not finding what you are looking for?