f your 2008 Maytag double oven's lower door is locked, here are some steps you can try to unlock it:
Press Cancel/Off Key: Start by pressing the Cancel/Off key. Wait for 20-30 seconds, then try to open the door. Sometimes this simple latch reset can do the trick.
Power Cycle: Turn off the power at the circuit breaker or fuse box for one minute. After that, turn the power back on. Allow the oven to cool for approximately 30-90 minutes, and then move the latch arm to the left to unlock the door.
Self-Clean Cycle Interruption: If the door locked during a self-clean cycle, select the "Self Clean" option, and then choose "Cancel". Wait a couple of minutes, and then try to start the cycle again. If the self-clean cycle was started by mistake, press the Cancel/Off key. The oven will need to cool to around 200°F (95°C) before the door can open.
Remember to ensure that the oven is cool and the power is turned off before attempting any of these steps. Hopefully, one of these methods will help you unlock the oven door! Your manual might prove helpful. Oven is Locked - What to Do - Product Help ' Maytag
This could be due to various reasons such as power fluctuations, overheating, software glitches, or hardware malfunctions. Have you tried checking the power source, ensuring proper ventilation
Never ever use the Self Cleaning Feature. Its main function of to break things like elements, door looks and frazzle control boards. That keeps the maker is steady sales of spares.
My old Ge Stove is from the mid 1970s. Of course they don't make them like that any more. They are non-electronic, so only elements can fail.
You can check elements for continuity with a multimeter and replace them. If you fancy a new one, get one but never use the self cleaning feature and it will indeed last you 30 years.
Bake elements
https://www.google.com/search?q=Whirlpool+stove+bake+element
..
Dependant on age and use, the piezzo cell is either clogged up with condensed cooking steam/grease or the control panel is faulty.
There is no adjustment unfortunately.
It helps to have FULL make and model, but here are a few.
F7 error code can be a result of a faulty wire harness (short-circuit), defective heating elements or oven sensor. A qualified service technician will need to have a look, determine faulty part then replace or repair it.Apr 27, 2023
The self cleaning features only serves to keep manufacturers in steady sales of parts. Quite simply the oven can only take those temperatures a few times until they break. The heat burns out elements, damages fans, door locks and worst of all damages control boards which are not far enough from the heat source. It sounds like your control board is fried. Try turning it of at the breaker for 15 minutes by way of a reset.
Never use the self cleaning feature as stated here
https://www.google.com/search?q=self-cleaning+oven+temperature
..