Optics - Page 4 - Recent Questions, Troubleshooting & Support

Question edited for a lot more clarity. Question moved from Garden to a Marlin Category. https://www.google.com/search?q=model+80g+breakdown ..

It sounds like there may be a problem with the valve or seal in your compressed air gun. Here are a few things you can try to fix the issue:

1. Check the valve: Make sure that the valve in your compressed air gun is not stuck in the open position. Sometimes debris can get lodged in the valve, preventing it from closing properly. Remove the air gun from the bottle and check the valve for any signs of damage or debris. If necessary, clean the valve with a soft-bristled brush or compressed air.
2. Replace the seal: The seal in your compressed air gun may have become worn or damaged, causing air to leak out. Try replacing the seal to see if that solves the problem. You can usually find replacement seals online or at a hardware store.
3. Tighten the connection: Make sure that the connection between your compressed air gun and the bottle is tight. If the connection is loose, air can leak out even if the valve and seal are working properly. Check to see if the threads on the bottle or air gun are damaged or worn, and replace if necessary.

If none of these solutions work, you may need to replace your compressed air gun or seek professional assistance to diagnose and repair the issue.

Plenty of info out there if you ask google about it. Equifax says 100 000 Canadians impacted by cybersecurity breach

Hello K Brink, Kind of like deja vous (all over again )... Pretty sure: This is the same Question I answered yesterday (no / yes? ). There is no going back... Once the CO2 cartridge is pierced... there is no way to salvage the cylinder until it is FULLY expended... If you unscrew the chamber the CO2 will ALL be released. Just ONE word... If your cylinders are depleted... ALWAYS check that the SEALING O-ring stays with the hand-gun. Just make sure yur SEALING RING is still in the "gun" and NOT STUCK to the ... co2 CARTRIDGE. I am just saying... ((been there... Done that))... Carnac the Magnificent

Whether or not it's worth it to buy a replacement hand control for your NexStar 90GT telescope depends on a few factors:

1. How often do you use the telescope? If you use it frequently and rely on the hand control to find objects in the sky, then it may be worth it to invest in a replacement.
2. How important is the hand control to your observing experience? If you're comfortable manually finding objects in the sky and don't necessarily need the hand control, then it may not be worth the expense.
3. Can you find a cheaper alternative to the official replacement? Sometimes, third-party sellers may offer hand controls that are compatible with your telescope at a lower price.

Ultimately, it's up to you to decide whether the cost of the replacement hand control is worth it based on your individual needs and preferences.

Mine did that too. I just rubbed it liberally with baby powder and blew/rubbed it clean ....

I can find no reference to a company called 'SIFT' and a model called 'SWPA', so sourcing is difficult. You can buy rubber eyepieces easily. https://www.google.com/search?q=7x50+binocular+eyepieces The search query would be make model eye piece replacement ..

I have one still in the box with manual. Do you still need one?

Not much on that issue but normally requires strip down, replace seals and lubricate. https://www.replicaairguns.com/posts/2016/12/16/why-is-my-co2-airgun-not-working https://www.google.com/search?q=Gamo+PT-85+Blowback%2C+trigger+not+resetting ..

larry389's so-called solution is not a solution... just an opinion to which each individual is entitled... even when not correct! I've used a Zeika Opt. Co. Power Zoom Binocular No.25361 for over 25 years since inheriting them from my father who purchased them in early 1970. To say the least, treated carefully and with respect for the delicate instrument that they are, they've been wonderful and still work perfectly fine. Perhaps Larry's experience is based upon handling them like junk and, therefore, reaping what he has sewn.

Yes, you can get a replacement stove top for your Whirlpool clean top stove, and it depends on the model and the availability of parts. You may contact Whirlpool customer service or check with a local appliance parts supplier to see if they have the replacement stove top in stock. As for the installation, it will depend on your level of experience and comfort working with appliances, as well as the specific model of your stove. Some stove tops may be relatively easy to install, while others may be more complex and require professional installation. Generally speaking, installing a replacement stove top can be a difficult and complex task that requires a certain level of technical knowledge and expertise. It's recommended to consult the stove's user manual or contact Whirlpool customer service for assistance with installation instructions or to find a professional to do the installation.

https://www.google.com/search?q=Crosman+model+66%2C+trigger+doesn%27t+fire

Go to: https://www.manualslib.com/manual/525094/Meade-Ds-2000-Series-Autostar-Lnt-Smartfinder.html?page=11#manual

Please download it here : www.astronomy.net/forums/meade/messages/907.shtml
www.softlookup.com/driveauthor.asp?id=3280

Best regards, Jay

Put the lowest power eyepiece in the telescope-- that's the one with the LARGEST number on it.

Go outside and practice focusing on a distant object at least 100 yards away-- turn the focus knob slowly.

Remove the black plastic piece from the diagonal. Insert the eyepiece directly in the diagonal. You do not need the spacer.

You never told us what model number or telescope TYPE you own. Is this a refractor or a reflector. ???

If a REFRACTOR usually you have a diagonal, the diagonal goes into the focuser and then the eyepiece goes into the diagonal.

On a REFLECTOR the eyepiece goes directly into the focuser.

https://www.google.com/search?q=Reset+my+Samsung+TV+to+factory+setting ..

1964 https://www.gunvaluesboard.com/marlin-serial-numbers-dates-of-manufacture-1664.html https://www.google.com/search?q=Marlin+Limited+Edition+model+6081Year+of+manufacture ..

Try Tasco direct. They are pretty good for parts. https://tasco.com/customer-service/ ..