The four speakers are split into two groups left and right. You connect the positive terminal on the upper left speaker to the positive terminal on on the bottom left speaker. Then repeat process connecting negative to negative on the same two left speakers. Then connect one wire from the upper left positive to the positive connector on the jack that is marked 4ohm LEFT on the plate attached to the rear of the speaker cab. The do the same connecting a wire from the negative terminal to the negative terminal on the same left jack. Now repeat the process on the right side in exactly the same way this time connecting to the 4ohm RIGHT jack. The switch that is in-between the two jacks can be set for either channel or for both together for stereo at 8 ohms HOPE THIS HELPS
If your Peavey 14 BT mixer is not allowing you to pan the audio signal and is sending the same signal to both outputs, there could be a few potential reasons for this issue. Here are some troubleshooting steps you can take to address the problem:
1. **Check the Pan Controls:** Make sure you're using the correct pan controls for the channels you're trying to pan. The pan controls are typically knobs labeled "Pan" or "Balance" on each channel strip. Ensure that they're set to the desired positions.
2. **Reset Pan Controls:** If you've already adjusted the pan controls and they're not working as expected, try resetting them to their center positions. This can help eliminate any accidental settings that might be causing the issue.
3. **Channel Routing:** Some mixers have routing options that can affect panning. Check if there are any routing switches or buttons that might be affecting the signal routing for each channel.
4. **Mono/Stereo Mode:** Some mixers have a mono/stereo mode switch that can affect panning. Make sure the mixer is in the appropriate mode for your setup.
5. **Master Pan Control:** Ensure that the master stereo output pan control is set to the center position. If it's panned to one side, it can affect the overall stereo output.
6. **Test Different Channels:** Try panning different channels to see if the issue is specific to one channel or affecting multiple channels.
7. **Firmware/Software Update:** If your mixer has digital components or software control, check if there are any firmware updates available. Sometimes, software updates can address functionality issues.
8. **Physical Damage or Wear:** Inspect the pan controls and associated circuitry for any physical damage or wear that could be causing the issue.
9. **Factory Reset:** If none of the above steps resolve the issue, you might consider performing a factory reset on the mixer. Be sure to back up any important settings before doing this.
10. **Professional Service:** If the problem persists after trying these steps, it might be a more complex internal issue that requires professional servicing. Contact Peavey's customer support or a qualified audio technician for further assistance.
Remember that the exact steps and controls can vary depending on the model of your Peavey mixer. Refer to the user manual for your specific model for more detailed information on troubleshooting and operation.
Depending on the year, it could be a couple different places. There could be a little battery compartment on the outside body of the guitar. Sometimes they are separate from the other electronic controls. Sometimes that are part of the controls or even part of the guitar jack. But if it is on the outside of the body, it will have a little door that pops open when you push a tab. You just have to look and see if there is a little rectangular door. If you don't have a little door, then it is likely tucked inside the guitar, just inside the sound hole. If it is in there, then you will probably see a little cloth pouch with wires coming out. Thats where the 9v battery is kept and plugged in. It's usually held to the body with velcro.
If certain notes on your Technics SX-PR150 digital piano are playing at a lower volume than others, it's possible that there could be a few underlying reasons for this issue. Here are some steps you can take to troubleshoot and potentially resolve the problem:
Dust and Debris:
Check if there is any dust, debris, or foreign objects present around the keys and internal components. Dust or debris could affect the key's action and cause uneven volume levels.
Contact Cleaning:
If you're comfortable doing so, you can carefully open the piano and clean the contacts underneath the affected keys. Contacts that have accumulated dirt or oxidation might lead to volume inconsistencies. Use a clean, dry cloth or contact cleaner specifically designed for electronics.
Key Mechanism:
Inspect the key mechanism for any signs of physical damage, misalignment, or wear. Damaged or misaligned keys could lead to uneven volume levels.
Sensors and Sensors Board:
Digital pianos like the Technics SX-PR150 use sensors to detect key presses and control volume. If a sensor is malfunctioning or damaged, it could result in volume inconsistencies. Check the sensors and their connections for any issues.
Audio Output and Amplification:
Check if the issue is specific to the internal speakers or if it also occurs when using headphones or external amplification. If the issue is present across all audio outputs, it might be related to the piano's internal components.
Factory Reset:
Perform a factory reset on the piano to restore its settings to default. This can help rule out any software-related issues that might be affecting the volume levels.
Professional Inspection:
If the above steps do not resolve the issue, it's recommended to seek the assistance of a professional technician who is experienced in repairing digital pianos. They can diagnose the problem accurately and perform any necessary repairs.
Please exercise caution while performing any internal inspections or repairs on your digital piano, especially if you're not experienced in working with electronic equipment. If you're unsure or uncomfortable with the process, it's best to seek professional help to avoid causing further damage.
Experiencing discomfort or pain in your ears while playing your Technics digital piano is not a normal occurrence and could be a sign of an issue that needs attention. There are a few potential reasons for this phenomenon:
Frequency Range: It's possible that certain frequencies produced by the piano are resonating with the natural frequencies of your ears or the surrounding environment, causing discomfort. This could explain why you feel it more in specific ranges of the keyboard.
Acoustic Properties: The sound produced by the piano might be reflecting off nearby surfaces or causing standing waves in the room, which can create resonances that affect your ears.
Volume Level: If the piano's volume is too high, it could lead to discomfort or pain in your ears. Even if the volume seems moderate, it's possible that specific frequencies or overtones are causing issues.
Headphones: The fact that you don't experience this issue when using headphones suggests that the problem might be related to the piano's built-in speakers or its interaction with the acoustics of your environment.
Electronic Components: There could be a malfunction or interference in the piano's electronic components that is affecting the sound output in a way that causes discomfort.
To address this issue:
Volume Control: Try lowering the volume of the piano and see if the discomfort lessens. Gradually increase the volume until you find a level that doesn't cause discomfort.
Room Acoustics: Experiment with placing the piano in different locations within the room to see if it affects the sensation you're experiencing. You could also try using soft materials like curtains, rugs, or acoustic panels to dampen reflections and standing waves.
Equalization: If your piano has an equalizer or tone control settings, try adjusting them to see if it reduces the discomfort.
Professional Inspection: If the issue persists, consider having the piano inspected by a technician to check for any electronic or acoustic anomalies.
Expert Advice: If none of these steps resolve the issue, it might be best to consult with an audiologist or a professional musician who has experience with piano-related sound sensitivities. They might be able to provide more personalized advice and recommendations.
Your health and well-being are important, so it's essential to address any discomfort or pain you're experiencing while playing your digital piano.