Food Mixers - Answered Questions & Fixed Issues


Mmm--thats a start -make/model #

Food Mixers | Answered 7 hours ago | 16 views


Sounds as if the amplifier is overheating? Does it do this at all volume levels or only when turned up to higher levels- if so it's likely the amplifier inside of the receiver.
ac096182-5c40-4da4-aee7-2a0ee52a59a0-nuhf2ssaswwsu1mfl2kxuue2-5-0.jpeg

Kenwood Food... | Answered on Mar 17, 2019 | 20 views


Did anyone ever answer your question? You should be able to call them. I'm in Canada and the number here is 1-800-472-7606. But you should be able to find a customer service phone in the US by going to their website.

Cuisinart SM-70... | Answered on Mar 16, 2019 | 55 views


Most appliance shops would be able to order you one or google

Vitamix Vita Mix... | Answered on Mar 16, 2019 | 19 views


there is a link attached i am not 100% sure this is the cover you want but its a start https://www.ebay.com/usr/kuehdan?_trksid=p2047675.l2559

Sunbeam Food... | Answered on Mar 10, 2019 | 32 views


NOT A REPAIR QUESTION ASK THE MANUFACTURER THRU THEIR WEBSITE OR Google IT

Food Mixers | Answered on Mar 10, 2019 | 21 views


YOUR GUESS IS AS GOOD AS OURS WOULD BE . THO THEY DO MAKE A SILICON GREASE THAT IS USED IN THE FOOD INDUSTRY

Hobart Food... | Answered on Mar 08, 2019 | 51 views


Your best option is to replace a 25 year old appliance. the cost to repair will far exceed the monetary value of mixer.

Food Mixers | Answered on Mar 05, 2019 | 35 views


are you smart enough to try ???

Kenwood Food... | Answered on Feb 26, 2019 | 28 views


  • Defective switch
  • Faulty interlock

Food Mixers | Answered on Feb 26, 2019 | 38 views


"If the error code is flashing - wait for mixer to clear error condition. If mixer continues to stop and timer displays flashing error code, disconnect electrical power from mixer for 1 minute, then reconnect. If symptoms still exist, contact your local Hobart Service office."

https://www.alfaco.com/wp-content/uploads/2016/11/HL600-HL600C-HL662-Manual.pdf

Hobart HL600... | Answered on Feb 19, 2019 | 235 views


If the beater passes the dime test there is no need to change the adjustment screw. The screw head rotates an eccentric stop which changes how far up the bowl lift goes. The screw limited to a full range adjustment of !/2 turn.

To access the screw internally, the motor head must be removed from the column. Download the service manual from:

http://ep.yimg.com/ty/cdn/mendingshed/kitchenaid6qtservicemanual.pdf

KitchenAid Food... | Answered on Feb 18, 2019 | 105 views


If you are referencing the pin which locks the beater itself to the planetary's shaft, it can be removed with a punch.
However, if you are trying to remove the planetary itself, a 5/32" punch will do the trick.

KitchenAid Food... | Answered on Feb 18, 2019 | 28 views

Not finding what you are looking for?
Food Mixers Logo

Ask a Question

Usually answered in minutes!

Top Food Mixers Experts

Bruce Showalter

Level 2 Expert

87 Answers

Marvin
Marvin

Level 3 Expert

84027 Answers

Ross Keen

Level 3 Expert

1337 Answers

Are you a Food Mixer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...