Food Mixers - Popular Questions, Answers, Tips & Manuals


YOUR GUESS IS AS GOOD AS OURS WOULD BE . THO THEY DO MAKE A SILICON GREASE THAT IS USED IN THE FOOD INDUSTRY

Hobart Food... | 51 views | 2 helpful votes


Your best option is to replace a 25 year old appliance. the cost to repair will far exceed the monetary value of mixer.

Food Mixers | 35 views | 0 helpful votes


Check that hinge pin is in proper position. See following link for video instruction.

https://m.youtube.com/watch?v=r4l0qAMX6Fs

KitchenAid Food... | 105 views | 0 helpful votes


  • Defective switch
  • Faulty interlock

Food Mixers | 38 views | 0 helpful votes


Manufacturers website...support...manuals

Food Mixers | 126 views | 0 helpful votes


Sounds as if the amplifier is overheating? Does it do this at all volume levels or only when turned up to higher levels- if so it's likely the amplifier inside of the receiver.
ac096182-5c40-4da4-aee7-2a0ee52a59a0-nuhf2ssaswwsu1mfl2kxuue2-5-0.jpeg

Kenwood Food... | 20 views | 0 helpful votes


It involves unit disassembly.You'll have to determine easy/hard given your skill set.

Search on "kitchenaid tilt lever replacement" for video.

KitchenAid Food... | 68 views | 1 helpful votes


Hello, Dluebke -

Without knowing where you reside (what country and city), it is a challenge to direct you to an authorized Hamilton Beach repair service in your area. Fixya receives questions from people worldwide.

If you are in the USA, call 800-851-8900, during weekday office hours, and ask a Customer Service representative for the names, addresses, and phone numbers of authorized repair centers in your area of the country.

If you are in Canada, call 800-267-2826.

If you are in Mexico, call 01 800 71 16 100.

You can also use your favorite search engine (Google, Bing, Yahoo, DuckDuckGo, etc.) and enter the following search phrase, using quotation marks as shown, to come up with a list of authorized Hamilton Beach repair businesses:
"Hamilton Beach" "authorized service center"
or
"Hamilton Beach" "authorized service center" "your location"
Examples:
"Hamilton Beach" "authorized service center" "St. Thomas, Ontario"
or
"Hamilton Beach" "authorized service center" "Appleton, Wisconsin"

Best wishes.

Food Mixers | 97 views | 0 helpful votes


Model?

Look for the tilt lock lever on opposite side from speed control.

KitchenAid Food... | 94 views | 0 helpful votes


Fixya does not sell GE parts.

GE Food Mixers | 38 views | 0 helpful votes


What you need to check is going to depend on the model. No point me attempting to help without knowing what one it is. If it has a back cover held on by a single cross head (philips) screw then very likely the solution will be under there. When plugged in there is live power there so be aware ***** is not far away if you plan on messing about while it's live.

KitchenAid Food... | 36 views | 1 helpful votes


The problem, most likely, has to do with the hole in the planetary shaft through which the pin goes.

The edges on each side have distorted and flared outward. When this happens, I take a jeweler's file and carefully smooth ridge smooth in each side.

After that, the planetary slides back in place.

KitchenAid Food... | 62 views | 1 helpful votes


If the beater passes the dime test there is no need to change the adjustment screw. The screw head rotates an eccentric stop which changes how far up the bowl lift goes. The screw limited to a full range adjustment of !/2 turn.

To access the screw internally, the motor head must be removed from the column. Download the service manual from:

http://ep.yimg.com/ty/cdn/mendingshed/kitchenaid6qtservicemanual.pdf

KitchenAid Food... | 105 views | 0 helpful votes

Not finding what you are looking for?
Food Mixers Logo

9,245 questions posted

Ask a Question

Usually answered in minutes!

Top Food Mixers Experts

Bruce Showalter

Level 2 Expert

87 Answers

Marvin
Marvin

Level 3 Expert

84027 Answers

Ross Keen

Level 3 Expert

1337 Answers

Are you a Food Mixer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...