Locks & Locksmithing - Page 6 - Recent Questions, Troubleshooting & Support

are you the manager user of the safe?if yes,you can reset a new code by yourself.

Remove the batteries. Check them with a multimeter to check they are good. Reinsert them, making sure they are in correct polarity. Also make sure the battery contacts are clean.

The Stramm safe we have is a small one that we use to store keys for our drivers. To change the combination, open the safe with the current combination. Sorry, can't help you if you don't know that. Inside the door is a plastic panel covering the batteries. Pinch the plastic catch at the top and open the panel. There is a small red button which you can press to change the combination. When you press it, you will hear a double beep. Enter your desired new combination. The trick is that the last digit must be either an "A" or a "B" which signals the end of your combination. For example, if you want your new combination to be 123456, you can't do that. The closest you can come is 123456A or 123456B. Hope this helps. Steve, Mbeya, Tanzania

The lock is probably in passage mode, enter master code then press A5A this should bring the lock back to normal operating mode.

they are not even remotely the same You will need a viking blue remote

notify manufacturer or locksmith

Contact Support. Only they know their locks. CONTACT Multihousing Systems Customer Service Phone: 1-800-849-8324 Email Customer Service Technical Support Email Technical Support Phone: 1-800-999-6213 Ilco, Saflok, InSync & SAM RF Section 4, Page 15 of installation manual? And Page 34 says a fallen pin can cause lockout. https://www.dormakaba.com/resource/blob/984686/1a9540139f151b834729eaa7d8b0071e/pk3678-760-series-ig-04-18-pdf-data.pdf

https://octopup.org/img/stuff/manuals/WeiserLock--Powerbolt-1000--Owner's-Manual.pdf

Instructions:
Opening the key storage
compartment door
1. Open shutter door to reveal the dials
and the release button
2. Rotate dials to the current combination
(if the lock is new, the combination is set
at the factory to 0-0-0-0)
3. Press down on the release button
to open the door
4. Pull the door fully open
5. Add or remove keys
6. Close compartment door
7. Scramble the combination dials to lock
the door and conceal your combination (A)
8. Close the shutter door (B)
To set a new combination:
The initial combination is set at the
factory to 0-0-0-0
1. Open the compartment door
(see instructions above)
2. Push the reset lever left and down.
The lever remains in this position
3. Rotate dials to your desired combination
4. Push the reset lever, up and right, back
to the original position
5. Close the key storage compartment door
6. Scramble the combination dials to lock
the door and conceal your combination (A)
7. Close the shutter door (B)
To hang shackle model
1. Open the compartment door
(see instructions above)
2. Push the shackle release lever to the left
to open shackle
3. Pull the shackle up and out of the lock
4. Place shackle around door knob or other object
5. Close shackle to lock
6. Close the compartment door
7. Scramble the combination dials to lock
the door and conceal your combination (A)
8. Close the shutter door (B)
Reminder:
(A) The release button will open the lock
until you scramble the dials
(B) Keep the shutter door closed to increase
weather resistance and to conceal the
dials from view

Just throw it away and buy a new one from Sentry Safe. It is an unknown company with no Support. https://www.google.com/search?q=hardline+electronic+digital+safe+manual ..

Only the manufacturer can provide a certificate. Contact the manufacturer.

Ive got a Hardline Digital Electronic small safe and need to confirm to my broker for In surance purposes, if it is SABS approved or mot? please confirm? thanks

Buy another set of brand new fresh Duracell Batteries. Make sure the battery contacts have no corrosion on them. Try again. If that doesn't work, claim on the 5 year warranty. https://www.firstalertstore.com/store/products/Protector-by-First-Alert-Fire-Resistant-Executive-Gun-Digital-Safe-6741DF.htm ..

The advantages of having a gun safe are: • You can easily store your firearms and bullets in a safe place. • You can store more then one or more guns . • Fingerprint gun safes are available as well which offers further protection. • Apart from storing guns, you can also use the safe for other things as well such as storing jewellery, important documents, cash etc. Visit Guardwell Lock and Safe Ltd for buying best quality gun safes in online..

They are very insecure and easy to open. This link shows the 'bounce method'. https://www.google.com/search?q=how+to+open+a+mini+safe Or use a Rare Earth Neodymium magnet https://www.google.com/search?q=open+a+mini+safe+puck+magnet ..

Indeed, the Facto lock is currently sold as Kwikset's "264 Contemporary Keypad Deadbolt". However, Coaltowner's link points to the general FAQ page. Here's the page with the PDF user manual (in case anyone else is looking for it): www.kwikset.com/products/detail/264-contemporary-keypad-deadbolt?variant=264cnt-15

no info generic answer since no model given notify weiser or look up site for manual http://www.weiserlock.com/PDFs/install_sheets/SmartCodeLeverManual.pdf

have you solved this problem yet ?

I forgot my bTV safe code what I do now

Google make model manual or make model change combination It is impossible for us to guess what you have. Here are a few just for fun!

"Set-Your-Own" Combination Locks Instructions ' FAQs

https://www.masterlock.eu > ... > FAQs > Padlocks

Q: How do I set or reset the combination on my bike cable lock model 8221, 8231, 8120, 8190, 8226?

Change my combination? - S&G - Sargent & Greenleaf

https://sargentandgreenleaf.com > knowledgebase > kno...

Do not remove lock cover. If an error is made, re-dial the entire combination. A U8 change key is required to change the combination. If you ...

Support FAQs ' Master Lock

https://www.masterlock.com > Support

Q: How do I set or reset a Master Lock combination padlock that has a ... Q: How do I change the combination on a Set-Your-Own combination lock model #643D?

How do I set or reset the combination on my Lock Box?

https://www.snapsafe.com > support > faqs > how-do-i-...

Begin by opening your Combination Lock Box. To open a new lock box for the first time: Move all 3 digits to 0-0-0. Make sure all digits are centered on the ...