Kitchen Ranges - Page 5 - Recent Questions, Troubleshooting & Support
What is error code 5A6?
Hi,
Hold the clock key for several seconds and it resets the kitchen range.
Thanks for contacting fixya.com
Beeping F11 error on Frigidaire
Hi im an appliance tech and i had the same problem its not the EOC other words control board its actually the speed bake swith its stuck in the on position that why you get a stock keypad error code either f1 or f11 replace that switch or disconnect it and im positive that this will solve it .
What do I need to do my stove exploded? Hot glass every where help?
You will need to get an appliance engineer in and fit a new glass door panel.
Glass in not a warranty item as it breals if stressed.
If you contact the manufacturer firstly, they might send an engineer to check the door and if the door is warped, replace it free of charge, if you speak to them explaining how dissapointed you are etc.
Bosch HGI8054UC warming drawer won't close completely
The slides require replacing.The functions part on the rear of either the right or left side has failed causing your drawer not to close. It cannot lock so the spring pushes it out. The part on the rear that locks it in, and ejects it out some how gets damaged. Need a T 20 star/torque bit to replace. The part number for the slides is 12024638. You can pull out the drawer but be careful of the rail that will stick out. Don't let the drawer land on your feet. If you don't order the parts yourself and install this, you may call the Bosch service to do such for you --though you have noted the expense.
My Lasko Ceramic Heater is beeping every 5 second, how can i get it to stop?
It sounds like the beeping and flashing issue on your Lasko Ceramic Heater might be related to the clock setting. Here's what you can try:
Unplug the heater for a few minutes to ensure it's completely powered off.
While it's unplugged, try to reset the clock to the correct time by pressing the appropriate buttons on the heater's control panel. You might need to refer to the user manual for specific instructions on setting the clock.
After setting the clock correctly, plug the heater back in and see if the beeping stops.
If the issue persists, it's a good idea to consult the user manual or contact Lasko customer support for further assistance, as there might be a specific sequence of buttons to reset the clock or troubleshoot the problem.
Not finding what you are looking for?