Juicers - Page 8 - Answered Questions & Fixed Issues
Lost user manual
Hi Wendy, You can find a FREE user manual on line, I google (user manual for)+brand+model number .. For example: user manual for Samsung TV LE32R53B<- Example only.......
A web page opens and you'll find a free download on that page, I hope this helps.....CHEERS..
4/27/2016 2:36:58 PM •
Juicers
•
Answered
on Apr 27, 2016
•
930 views
Error message
I fixed my juicer that had this problem, the problem was the thermal fuse which is located directly on the motor with some plastic covering it. You can replace the fuse or do what I did and just cut off the fuse and attach the two wires together (no more fuse) and my machine now works again :)
5/25/2020 11:42:21 PM •
Breville Juicers
•
Answered
on May 25, 2020
•
2,099 views
Are the recipe book or the owners manual available?
The owner's manual should be available online. Any good juice recipe book will work with this juicer. I've found amazing recipes online and especially at countless Nutritional/ Vegan websites.This type of juicer is a "juice extractor", meaning it doesn't completely liquify all of the pulp like the new Ninja does. Look for recipes that work for a juice extractor.
3/16/2016 1:06:59 AM •
Jack Lalanne...
•
Answered
on Mar 16, 2016
•
952 views
Cleaning inside the cutter
I've been using my Champion for about 20 years, and have always used a very thin coat of olive oil on the turn shaft before sliding the cutter on. I've also used it before I've used the grain mill, and it has been fine.
If I were you, I think I would get out as much Crisco as I could with a chopstick (or something similar), put in some liquid soap, and some hot water. I would think that would loosen anything that was compressed or stuck. It might take a few times, but that's what I would try....or you could order a new cutter from Champion. I've had to order parts from them in the past, and they have been great.
Hope this helps.....
Cutter is stuck onto shaft, how can I remove it?
First, check to see if there is a set screw in the side of the cutter which screws against the shaft.
If no set screw, a gear puller would probably do the trick. There are many types -- you might luck out and find one which will fit on your first shopping trip.
Problems dismantling champion juicer
It's like a suction is created. I have had this happen. I managed to get mine off with a blunt knife to give a bit of leverage (not ideal I know to put a knife near an expensive piece of equipment but it worked for me) Once you have the blade cutter off I suggest oiling the metal prong that it sits on with something like vegetable oil or olive fairly regularly to avoid this happening again.
Not finding what you are looking for?