Irons - Page 7 - Popular Questions, Answers, Tips & Manuals

it could be a bad connection, a bad switch or a bad heating element. It must be disassembled to determine what the problem is. You might look up your model on a parts site and see if they have a breakdown picture. If they do not and do not sell parts, you have your answer. They are considered throw aways.

It sounds like you may have a possible direct short inside the iron. I would suggest either take it to an electric appliance repair shop or return it as being defective. If the problem still exists have your electrical outlet checked by a professional electrician.

sometimes the bottom plate can be cleaned. they make polish for that. Normally, it isn't replaceable. The iron will have to come apart to replace the wire. I would not use it until you do as the loose wire might contact the case and then what would you do. Light up?

The iron has failed. Leakage from the soleplate is indicative.

well ans 1 possible it could be a switch or connection problem need to analyse problem 2nd up to you if you want fix or just replace ---and blowing breaker makes it non operational

you won't unless you install a switch in line of the power cord. in other words put a switch on the cord. You can get them just about any where ACE walmart Home depot.The reason it's doing that is because the heating element is being told to heat up right away. it's not going to hurt anything. it is a good idea to have a switch though

Use a steam iron or coffee machine descaler powder or liquid.

https://www.rowentausa.com/consumer-services/contact-us https://www.rowentausa.com/consumer-services/warranty-and-repairs/repairers There does not appear to be an official repair center in Nebraska. Contact the manufacturer using the links above to request assistance, please.

need to get a meter and test switch wiring or element

Generally they do not provide repair parts for this type of appliance

I DON;T KNOW. BE CAREFUL AND DO NOT USE IT UNTIL THE IRON IS WORKING SAFELY. GOOGLE <velocity iron> AND CHOOSE YOUR MODEL. SHUT OFF THE SWITCH OR BUTTON FOR STEAM. SEARCH YOUR OWNERS'S MANUAL ETC. YOUR'S MAY STILL HAVE WARRANTY.

on of switch not working

need a meter and check the unit for short

Oh so you think your f wording funny? I will crack your skull against the pavement. Don't f word with me.

1. Defective switch 2. Defective heating element or control

look to see if its a gasket or a crack

https://www.manualslib.com/manual/1138090/Black-And-Decker-Ir02v.html

I imagine that it would be the water valve not closing, allowing water to continue to enter the steam chamber. I have no idea how to get into these to have a look.

if its steaming then its better to throw it its safe for u

https://www.t-falusa.com/instructions-for-use/Products/Linen-care/Steam-iron/csc/SteamIronSub