Home Security - Page 4 - Popular Questions, Answers, Tips & Manuals
Pilot SAE-1610 Electronic Safe won't open. Why?
Question edited for clarity.
Question moved from Heating and Cooling.
You can open it with the backup key and replace the depleted batteries. Then reset a new combination.
All this type of safe can be opened with a large rare earth magnet faster than using the combination!
Sentry Supreme 5330 safe will not open
If your Sentry Supreme 5330 safe is not opening, there could be a few possible reasons why:
- Combination Error: If you are using a combination to open the safe, make sure that you are entering the correct combination. If you have forgotten the combination, you will need to contact Sentry Safe customer service to get assistance on how to recover or reset your combination.
- Dead Batteries: If you have an electronic lock on your safe, the batteries may be dead. Replace the batteries and try again.
- Jammed Bolts: The locking bolts may be jammed due to incorrect operation or a mechanical problem. Try tapping the safe door gently with a rubber mallet to loosen the bolts and then try to open it.
- Mechanical Malfunction: If the safe still does not open, there may be a mechanical malfunction. In this case, you will need to contact a professional safe technician to diagnose and repair the problem.
Note: If you have lost your key, you will need to contact Sentry Safe customer service to order a replacement key.
Cant close safe with key ?
If you are unable to lock your safe with the key, there may be a few reasons why this is happening. Here are some steps you can try to resolve the issue:
- Ensure the locking bolts are fully retracted: Before trying to lock your safe, ensure that the locking bolts are fully retracted into the safe door. If the bolts are not fully retracted, this can prevent the locking mechanism from engaging.
- Make sure the key is fully inserted: Ensure that the key is fully inserted into the lock mechanism and turned in the correct direction to lock the safe. Sometimes the key may not turn if it is not fully inserted into the lock.
- Check for any obstructions: Check the door and locking mechanism for any obstructions that may be preventing the lock from engaging. Ensure that the door is fully closed and flush with the safe body.
- Try applying pressure to the door: Sometimes safes can become misaligned, making it difficult to lock the door. Try applying gentle pressure to the door while turning the key to see if this helps the locking mechanism engage.
If none of these steps resolve the issue, there may be a problem with the locking mechanism itself. In this case, you should contact a professional locksmith to diagnose and repair the issue.
3/14/2023 3:48:29 PM •
Home Security
•
104 views • 1 helpful votes
My kkmoon nvr turns on but won't show camera feed on my screen
If your KKmoon NVR turns on but won't show camera feed on your screen, here are a few troubleshooting steps you can try:
- Check the cables: Make sure all cables are securely connected and that the camera is powered on.
- Check the NVR settings: Ensure that the NVR is set to display the correct camera channel. Go to the NVR's menu and look for a setting related to camera input or channel selection.
- Check the resolution: Make sure the resolution of your monitor is set correctly. If the monitor's resolution is too low, it may not be able to display the camera feed.
- Update the NVR's firmware: Outdated firmware can cause problems with the NVR's functionality. Check the KKmoon website for any available firmware updates.
- Restart the NVR and monitor: Sometimes a simple restart of the NVR and monitor can resolve the issue. Unplug both devices, wait for a few seconds, and then plug them back in.
If none of these steps resolve the issue, you may need to consult the NVR's user manual or contact the manufacturer for further assistance.
2/12/2023 8:10:02 AM •
Home Security
•
230 views • 0 helpful votes
Not finding what you are looking for?