Home Security - Popular Questions, Answers, Tips & Manuals


GOOGLE IT

The Home... | 53 views | 0 helpful votes


Most dial safes will need to be done by a safe technician. Try local locksmiths who deal with safes and they should be able to help you out.
I figure service call and combo chg or hourly rate.
If its a safe you can carry you could avoid the service call. May just be able to bring door only too.

The Home... | 66 views | 0 helpful votes


FACT OF LIFE THINGS EVENTUALLY MADE BY MAN DO FAIL . HECK EVEN THINGS MADE BY GOD FAIL OR WE WOULD NEVER DIE

Home Security | 43 views | 0 helpful votes


If you registered the safe contact the manufacturer, they may have records of it and be able to help you.
Otherwise you may need a safe technician to manipulate or drill the safe.
Call a local locksmith who works with safes.

The Home... | 61 views | 0 helpful votes


please ask a question and please be specific as possible. This is not a question and has not enough information to answer a question if it was one- we could not begin to tell you why your unit is not working without more information.
when did it stop working
any noises
what were you doing when it stopped working
any smells
any warning messages
did the cameras loose power
too many questions so offer as much as you can when you do ask
good luck

Video Home... | 44 views | 0 helpful votes


locksmith time we do not know safes here

Home Security | 30 views | 0 helpful votes


This is caused by one of the alarm settings. It could be as simple as motion alarm. It can also be a bad or no hard drive or video loss. So the best thing to do is check everything and turn off the motion alarm and any other alarm you want to turn off. It's all in the admin settings under alarm. Good luck.

Lorex Home... | 42 views | 0 helpful votes


SADLY WE DO NOT HAVE THAT AS WE DID NOT PURCHASE IT OR REGISTER IT AT THEIR WEBSITE

Home Security | 41 views | 0 helpful votes


Dirty or obstructed sensor

3) One or more non-contact sensors shall be located where the risk of entrapment or obstruction exists, such as the perimeter reachable by a moving gate or barrier.

https://www.amazinggates.com/v/assets/Manuals/Elite-SL_3000-manual.pdf

Elite Sl 3000 Ul... | 27 views | 0 helpful votes


You are right. In a security camera the yellow one is for video and the white one is for audio. You can connect them as accordingly with black wires. The red wire is for the power (+12V) with a black wire. You can connect them also.

Video Home... | 30 views | 0 helpful votes


I had exact issue with a brand new unit. I was about to return it and then it suddenly started working. Try gently jiggling the lock mechanism with a small screw driver. Maybe that will help but I truly don't know why started working.

Home Security | 652 views | 0 helpful votes


Check to see if the hard drive is being recognized. You may need to format it or replace it if not being seen.
Then make sure the schedule is set for continuous or motion and each day and time is chosen. Then make sure if this is set to motion, that the motion grid is covering the areas where you want to capture activity.

Home Security | 69 views | 0 helpful votes

Not finding what you are looking for?
Home Security Logo

18,316 questions posted

Ask a Question

Usually answered in minutes!

Top Home Security Experts

Brad Brown

Level 3 Expert

18002 Answers

Marvin
Marvin

Level 3 Expert

84027 Answers

Lawrence Oravetz

Level 3 Expert

10524 Answers

Are you a Home Security Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...