Home Fencing - Popular Questions, Answers, Tips & Manuals

Debb, Check this site they can help you find your parts and assist in how to replace it. https://jeld-wenparts.com/

It sounds like there may be an issue with the opener mechanism on your Elite SL3000 fence gate. The fact that the gate opens but does not close, and that the amps rise when trying to close, suggest that there may be a problem with the motor or gear assembly. Additionally, the fact that the gate closes when you push on it a little suggests that there might be a problem with the alignment of the gate or with the gate's track. Possible causes for this issue include a faulty opener motor, a problem with the gear assembly, or a problem with the alignment of the gate. Here are some steps you can try to fix the problem:

1. Check the alignment of the gate: Make sure that the gate is properly aligned with the gate post and that the hinges are not bent.
2. Check the gate's track: Make sure that the gate's track is clear of any debris and that the rollers are not worn out.
3. Check the opener motor: Make sure that the opener motor is functioning properly and that the gear assembly is not stripped.
4. Check the battery: Make sure the battery that is powering the opener is charged and in good condition.
5. Check the settings: Make sure that the gate opener settings are correct and that the gate is set to close automatically.

If you are not comfortable with these steps or the problem persists, it's best to contact Elite customer service or a fence/gate professional for further assistance.

Drive way gate (tell what it is first) not a car

Question edited for clarity. Question moved from Cars and Trucks to DoorKing 1812. Bad connection or they sold you a faulty board. With main boards, I would always recommend calling for service as they are expensive and it passes the responsibility to the service engineer to make the right decision and replace a new board if is is faulty. The unscrupulous will clean up and old board and send it back, then they have a spare board or a refund.

We help managers make the right hiring decision consistently to ensure their companies continue to thrive, staffed with the best men and women for the job. We are the world's primary choice in pre-employment Integrity testing. Read more: Pre employment integrity test

Disconnect the power to it for 5 minutes to Reset it. Then press the Reset button. If that doesn't work call for professional service https://www.affordableopeners.com/manuals/gate_operators/elite/miracle1/manual.pdf ..

Shield the control box with Aluminum or lead foil to cut out EMI.

BAD MOTOR PERHAPS

Contact Liftmaster directly to request the master code.

Do you have sensors that stop the gate closing on people or cars ? If so put your ear near the sensor but not inline with the opposite one. Now gently wave your hand in front of it .... if there is no click then something is obstructing the beam. Sometimes spiders get inside and spin that candy floss type web in there .

Go to the manufacturers website, download the user manual and you will most likely find it in the manual.

The clutch plate is probably stuck. If you have a clear space in front of the truck select first gear, release the parking brake and start the engine with your foot on the clutch. The vehicle will lerch forward and the engine should start with the vehicle now moving forward. Hit the brakes with your left foot still on the clutch and the clutch will probably release and work normally.

The first place to look is your receiver. This is the device, often separate from the actual gate operator, that responds to your transmitter. Stand next to the gate operator and you should hear a small click coming from the receiver when you or someone else pushes the button. You can sometimes find the receiver by following the antenna cable back to it. If it does not have an external antenna, look inside the operator box for either an antenna screwed into the receiver or a wire hanging from a plastic box. If you hear the click and the gate does not open, the possibilities grow exponentially so we won't try to address every possibility here. If you hear a click when you are close, but not when the transmitter is triggered at a distance, check the antenna. If you don't hear the click, then either the remote has lost programming (this often happens with rolling codes transmitters when they are not used for a long time), or the receiver is not working. Check to make sure the receiver is getting plenty of power power using a meter. It should read at the recommended voltage or a bit higher. Usually around 24 volts but some receivers can work down to 12 volts. If it gets plenty of power and the remotes have been programmed back in, consider replacing the receiver.

on the internet

High energy bills is a very common problem. Every home owner or tenant wish to save energy to lower energy home energy bills. There are different ways to lower your home energy bills. I am going to share a blog post which will guide you to do it properly.

The timing relay has to be setted right. There is a time control on every unit,. 1-[Distance has to be set right before setting time relay] 2-(opening time and closing time has to be set accordingly to ur safety and wanting)

Check for obvious bad contacts. The next thing to check is the loop detector itself. Since you are checking inductance measured in Henry's it would be good to get the specs from manufacturer Try calling customer service.

If you dont already have this: try adding sod, some mulch and afew plants (with colors). But keep in mind it should have low maintenance. Alot of homebuyers like low maintenance. Something that they can do themselves or hire someone to do cheap. Please see below for example. Hope this helps!

Check to see if the screw retractor is stuck.