Heavy Machinery - Page 2 - Recent Questions, Troubleshooting & Support
I need a Manual for a Millers Falls TWM 13HP Wood Chipper, Shredder, Mulcher - it has the JiangDong JF390 engine. I can't seem to find one anywhere - can you help? Regards - Steve
Here are some general steps you can take to try to locate a manual:
- Check the manufacturer's website: Check the Millers Falls website to see if they have a manual available for download. If not, you may be able to contact their customer support for assistance.
- Search online: Search for the manual on websites such as ManualsLib or ManualsOnline. You may also find helpful information or user manuals on forums dedicated to chippers and shredders.
- Contact a local dealer: Contact a local dealer that sells Millers Falls products. They may have access to the manual or be able to order one for you.
- Contact the engine manufacturer: Since you have the engine manual, you could contact JiangDong directly and ask if they have a manual for the chipper and shredder.
If you are unable to find the specific manual for your chipper and shredder, you could try using the engine manual as a reference for basic maintenance and troubleshooting. However, be sure to use caution and follow all safety precautions when operating the equipment.
Ia vermeer wood brush chip display said unknown spin any Idea of what would cause that
If the display on your Vermeer wood brush chipper is showing an "unknown spin" message, it could be caused by a problem with the chipper's drive system or a sensor issue. Some possible causes of this issue include:
- A problem with the chipper's drive belts or pulleys: If the drive belts or pulleys are damaged or misaligned, it could cause the chipper to spin erratically or stop spinning altogether.
- A problem with the chipper's hydraulic system: If the hydraulic system is not functioning properly, it could cause the chipper to spin erratically or stop spinning altogether.
- A problem with a sensor: If one of the sensors that is responsible for monitoring the chipper's speed or torque is not working properly, it could cause the display to show an "unknown spin" message.
To troubleshoot the problem, you will need to do some basic checks and tests. Start by inspecting the drive belts and pulleys to make sure they are in good condition and properly aligned. You should also check the hydraulic system for any visible issues or leaks. If those components are okay, you should then check the sensors to see if they are functioning properly. If the problem persists after trying these steps, it may be necessary to have the chipper inspected by a technician to determine the cause of the issue.
2.4 liter 4 cylinder propane engine timing chain setup
The timing chain on a 2.4 liter 4 cylinder propane engine should be properly aligned to ensure that the engine runs smoothly and efficiently. If the timing chain is not properly set up, it can cause a variety of problems, such as engine misfires, reduced performance, and shortened engine life.
To set up the timing chain on your Woodward G25E-5 forklift, you will need to follow these steps:
- Locate the timing marks on the camshaft sprocket and the crankshaft sprocket. These marks will be used to align the timing chain.
- Rotate the engine until the timing marks on the camshaft and crankshaft sprockets are aligned. This will ensure that the timing chain is properly tensioned.
- Install the timing chain guide and tensioner, making sure that they are properly aligned with the timing marks on the sprockets.
- Adjust the tension on the timing chain as necessary. This may require special tools and should be done carefully to avoid damaging the timing chain or engine.
If you are unsure about how to properly set up the timing chain on your forklift, I recommend seeking the assistance of a professional mechanic or contacting the manufacturer for more information.
On starting the machine error code 222 display on the panel and the lift will not move on line H25
Error code 222 on a Linde H25 forklift typically indicates a problem with the lift's hydraulic system. This could be caused by a variety of issues, such as a malfunctioning pump, a faulty valve, or a leak in the hydraulic system.
You can try this:
- Check for any visible leaks or damage to the hydraulic lines or components.
- Check the hydraulic fluid levels and make sure they are at the proper level.
- Check the operation of the lift's controls and make sure they are functioning properly.
- Check the operation of the lift's safety features and make sure they are not activated.
- If the problem persists, you may need to call a professional forklift repair technician to diagnose and fix the issue. They will be able to determine the root cause of the error code and provide the necessary repairs.
Not finding what you are looking for?