Hardware & Accessories - Page 2 - Answered Questions & Fixed Issues

Question edited for a lot more clarity. All question need 'make model what is is)' as first words in the question. Question moved from Lands Phone to Woods Timer. Phone number removed. This site has 11 million views a year, how many would you like to phone you? Instructions and videos. Follow carefully. If that doesn't work, contact Woods for warranty replacement. https://www.google.com/search?q=woods+50016+timer+instructions ..

https://sites.google.com/site/dyiu22/home/noma Quoting from web link:

NOMA

125V AC / 60 Hz OUTDOOR DIGITAL BLOCK HEATER TIMER 052-8835-2 Instructions Plug timer into grounded outlet

To Set the Current Time: Press the HOUR button as many times as necessary to advance the display the correct time. Note, the time can only be set in 30 minute intervals. The LED display will display the hour (1-12) and on the half hour a light will illuminate in the upper right corner, next to the number 30. To change from AM to PM toggle 24 times, a dot will illuminate in the lower right corner of the display next to the letters PM.

To Program the Timer: Press the PROGRAM button once, the letter P will flash. Press the HOUR button to set the ON time. Press the HOUR button to set the ON time. Press the PROGRAM button again, the letter E will flash. Press the HOUR button to set the OFF time. Press the PROGRAM button to exit program setting mode. Press the HOUR button to review the ON/OFF setting.

To Connect/Operate the Timer: Plug device in to the timer and turn the device on. To Revise the ON/OFF Setting: Unplug the timer and plug it back in. Repeat the programming steps above. To Override the Timer: Press the PROGRAM button if you want the device to turn on before the preset time, but note the device will turn off at the preset time. For example, if the preset ON/OFF period is 3 pm - 4 pm, users can manually press PROGRAM to turn the device on at 2 PM, the timer will keep running until the preset off time at 4 pm. Suitable for use with outdoor appliances. Raintight when mounted vertically with the receptacle facing downward. Use a three-conductor GFCI protected outlet. Do not immerse in water. DO NOT EXCEED RATED CAPACITY. Not for permanent installation. Do not install or use this product for more than a 90-day period per year.

NOMA Dennis

Yeah thats right

Contact them for a free replacement. But first press and hold the Reset Button on upper right. https://images-na.ssl-images-amazon.com/images/I/71OhENnuRdL.pdf ..

Yes, it does exist. It is an outdoor timer. https://www.canadiantire.ca/en/pdp/noma-indoor-heavy-duty-grounded-timer-2-outlets-0529203p.html https://hydroponics.net/documents-hf/7085_7dayDigitalTimerInstruc.pdf ..

I have just been dealing with the same model of timer. The instructions are a bit "opaque" on this point! There's a tiny button on the right-hand side labelled with an R (for Reset). With the timer plugged in to a live wall outlet, take a ball point pen and press that in for a couple of seconds. You should hear a click and the timer should then show something on the display. You can easily set it up from there following the instructions that came with it. Cheers!

Make sure the screw in the middle of the dial is tight and make sure the screws on the tappets are tight. Tork are made by NSi Industries. Support is on the page below.

NSI Industries: Home

NSI Industries https://www.nsiindustries.com The NSI family of brands are your reliable partners in Electrical, HVAC and Building Technologies. We carry a full line of professional-grade products and ...

TORK

TORK, a pioneer in the electrical industry since 1922, offers ...

Mechanical Timers

All Mechanical Timers · TORK 101 Mechanical Time Switch ...

All Products

Innovation and Quality: NSI Connectors Meet NEC 230.46 ...

Contact Us

We're Here to Help General Inquiry Contact Quick Links Customer ...

$18 for a new one. They are fully electronic, the Triacs on the boards fail. https://www.google.com/search?q=Defiant+49808 ..

If you look on the back, you will find the instructions engraved in it. You will need good eyesight. Is it the one with the photocell for Christmas lights? Plug it in, press the button once for set, press again until you reach the number of hours (say 6) after dark you want it it on. Take note that when you set it, the light will be on. It won't work properly until the next day. On at dusk (5:00pm is) and off after the preset (6) hours. https://www.google.com/search?q=woods+outdoor+timer+instructions Two button

No make and model given, or what the timer is controlling, but there is generic timer advice here. https://www.google.com/search?q=Timer+turns+off+before+the+programmed+setting ..

The is nothing online. Ask NSI Industries if they can service it? You may even get a warranty repair if a spring boke.

TORK 1101B 24-Hour Indoor Mechanical Time Switch 40A ...

NSI Industries https://www.nsiindustries.com > product > tork-1101b... TORK 1101B 24-Hour Indoor Mechanical Time Switch 40A 120V, SPST Outputs ; Repairable Units · Mechanical time switches can be repaired when components reach the ... https://www.google.com/search?q=Tork+1101+parts+diagram We are Fixya, not Tork, we just have a category for it. ..

I found my manual...simplified version: 1) On the panel - press the manual button 3 times until Auto is lit - the remote can now be used 2) press on - on the remote 3) press the desired time (2, 4, 6 or 8 hours) on the remote 4) press repeat on, on the remote Timer should be set!! =) Pressing auto off wipes out anything that was programmed!! Pictures attached!

10-30-12Smith's ETU02 timer does not appear on the Smith's manual page:http://www.tlc-direct.co.uk/Technical/DataSheets/Smiths/Index.htmOther sites report this 7-day digital timer is discontinued, but can be replaced with similar timer from local box store locally.Another option is to search following page for same-similar timer that might yield a manual similar to your timer.http://waterheatertimer.org/Woods-timers-and-manuals.html#6-week If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

Replace the Hydraulic oil in the log splitter after every 150 hours of use. Take following steps to replace it.

1. Make sure all moving parts stops and the log splitter is unplugged.
2. Unscrew Oil Drain Bolt with Dipstick to remove it.
3. Turn the log splitter on the Support Leg side over an 4 liters capacity container to drain the hydraulic oil off.
4. Turn the log splitter on the the motor side.
5. Refill fresh hydraulic oil at the volume as per the hydraulic oil capacity of a particular model indicated in above specifications table.
6. Clean the surface of Dipstick on the Oil Drain Bolt and put it back into the oil tank while keep the log splitter vertically.
7. Make sure the level of the refilled oil is just between 2 grooves around the Dipstick.
8. Clean the Oil Drain Bolt before thread them back. Make sure they are tightened to avoid leakage before place the log splitter horizontally.

Periodically check oil level to ensure it is between 2 grooves around the Dipstick. Upon Lower oil level, oil refilling is required. Source: http://www.qci.net/files/5_Ton_Log_Splitter_-_USE_THIS_MANUAL.pdf

Christmas lights timer with a single button? The instructions are engraved into the back. It will go off and come back on after one full time cycle. You have to set it and then leave it alone. Don't set it in the dark (if it has a photocell) or after the time it is due to come on, so in other words don't set it at 6pm to come on at 4:00pm. All questions need 'make model (what it is)' first 3 words. ..

F= offO= on1-9= # of hours it stays on after duskD= on from dusk to dawnR= random hours is stays on after dusk each night

Contact grundfos.com http://waterheatertimer.org/Water-heater-recirculation-system.html http://waterheatertimer.org/Should-you-buy-solar-water-heater.html Gene If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

The wiring diagram is here. There is a part called 'soft start' and parts appear to be in stock. In fact all parts but one are in stock. START SOFT SKU TTI-089240020009 In Stock $67.95 https://ridgid.ordertree.com/catalog/partslist/view/group_id/467808/?assembly=WIRING%2BDIAGRAM&assembly_id=57257 https://www.google.com/search?q=Ridgid+R4514+parts ..

Check out these videos and see if they may be of assistance: How to Program A Defiant Indoor In wall Digital Timer model 32648 - Instructions - YouTube How to program a smart digital timer - YouTube