Food Processors - Page 6 - Answered Questions & Fixed Issues

0helpful
1answer

Cuisinart DLC 7 Super Pro. Is the motor finally "toast"?

Sounds like the Motor's Start Capacitor needs replacing. It gives the motor a big jolt of power to get it running.

Cuisinart DFP-14BCN Capacitor Replacement - iFixit

https://www.ifixit.com > Guide > Cuisinart+DFP-14BCN...
The Cuisinart DFP-14BCN has two capacitors, so these steps may be ... Unplug your food processor before starting any disassembly. ... +7 more badges ...

cuisinart food processor replacement parts - Amazon.com

https://www.amazon.com > cuisinart-food-processor-re...
Results 1 - 48 of 717 - Amazon.com: cuisinart food processor replacement parts. ... Cuisinart Work Bowl for 14-Cup Food Processors (DLC-7, DFP-14).

Food Processor Replacement Parts & Accessories - Cuisinart

https://www.cuisinart.com > ... > Parts & Accessories
Purchase authorized Cuisinart® replacement parts and accessories for Food Processor Replacement Parts direct ... Discontinued 7 Cup Food Processor (DLC-5). Missing: capacitor ‎' Must include: capacitor

Cuisinart DFP-14BCN Capacitor Replacement - InfoCon.org

https://infocon.org > skills > iFixit > Cuisinart DFP...
PDF Replacing your faulty capacitor will bring power back to your motor, allowing the blades to spin. The. Cuisinart DFP-14BCN has two capacitors, ... 9 pages

Cuisinart DLC-7 & DFP-14 Parts - KitchenWorksInc

https://www.kitchenworksinc.com > cuisinart-dlc-7-dfp-...
Replacement parts for the DLC-7 & DFP-14 model food processors.
9/13/2021 4:01:15 PM • Food Processors • Answered on Sep 13, 2021 • 522 views
0helpful
1answer

I have a magimix 2800. I have 3 cutting discs but what else do I need in order to be able to use these in the machine?

You need the spindle that goes onto the bottom drive and the slicing and grating discs go on top. All you parts are here https://www.google.com/search?q=magimix+2800s+spare+parts ..
9/9/2021 8:48:50 PM • Magimix Food... • Answered on Sep 09, 2021 • 309 views
0helpful
1answer

Manual for sunbeam maestro pro 750 3 in 1 food centre

Here it is: https://docs.google.com/document/d/1Fty0SowbdxlP78SnVc5w9WwmJbg3HwvNkazQhJmmG4c/edit?usp=sharing
9/7/2021 7:26:32 AM • Westinghouse... • Answered on Sep 07, 2021 • 700 views
0helpful
1answer

Manual for Sunbeam Food Processor LC5800 (Maestro Pro750)

I just got it from Sunbeam: https://docs.google.com/document/d/1Fty0SowbdxlP78SnVc5w9WwmJbg3HwvNkazQhJmmG4c/edit?usp=sharing
9/7/2021 7:25:37 AM • Food Processors • Answered on Sep 07, 2021 • 267 views
0helpful
1answer

Hey. I'm looking for a manual for a Sunbeam Maestro Pro LC5800. I'm also after the blade that stores inside the machine (not the one that stores in the bowl), and some feet for the unit. TIA :)

I emailed Sunbeam and they kindly sent me the pdf. If I've done this right it is available on Google Drive with this link https://docs.google.com/document/d/1Fty0SowbdxlP78SnVc5w9WwmJbg3HwvNkazQhJmmG4c/edit?usp=sharing
9/7/2021 7:22:51 AM • Sunbeam Food... • Answered on Sep 07, 2021 • 390 views
0helpful
4answers

Sunbeam Food Processor/Le Chef 14-11, 14-1A

Check this website: //http://www.householdappliance.com/food_processor_parts.html
8/21/2021 10:27:35 PM • Sunbeam 4816-9... • Answered on Aug 21, 2021 • 5,448 views
0helpful
3answers

I just got a kenmore refrigerator from a friend

hook the end up to the cutoff valve then the fridge dump first batch of ice out nothing special to do
8/8/2021 6:47:49 PM • Food Processors • Answered on Aug 08, 2021 • 88 views
0helpful
2answers

What temperament should i put on my fridge?

Most fridge manufacturer's suggest 34 degrees F (but no lower) for the fresh food compartment, and 0 degrees F (lower is O.K.) for the freezer.

Measure temperature on the fresh food compartment by placing a thermometer in a 6 - 8 ounce glass filled with cold water. Place the glass with the thermometer on a shelf in the fridge. Wait about an hour or two (assuming the door stays shut) and check temperature. The water is to minimize changes shown on the thermometer when you open the fridge door.

I hope this helps & good luck! Please rate my reply. Thank you.
8/8/2021 6:39:30 PM • Food Processors • Answered on Aug 08, 2021 • 197 views
0helpful
2answers

We need times for cooking bread recipes as the

some times / hard and dry problems relate to mixture . more mosture . ( liquid's ) needed in mix .. time / tempt/ and altude . / all things needed for good baking . google your bread and type . as there is much info for this .. **** ..
7/26/2021 1:50:24 AM • Food Processors • Answered on Jul 26, 2021 • 132 views
0helpful
1answer

Do u have a chopping blade for the Breville Superwizz FP2A for me ?

fixya doesnt sell products
7/19/2021 12:13:11 PM • Food Processors • Answered on Jul 19, 2021 • 55 views
0helpful
1answer

Blade is stuck on shaft.

Did you fix the problem? Mine is stuck too..
7/19/2021 2:10:21 AM • Cuisinart MM-2M... • Answered on Jul 19, 2021 • 112 views
0helpful
1answer

I have an IONA POWER + food processor. It works

This answer comes 12 years later, mebbe toooo late. Turn the plastic bowl clockwise to unlock it.At the bottom of the bowl there are two rectangular holes. Insert some thick object like steak knife handle so it will come on top of the salient part. Use theses inserted thingy-s as levers. When you lift up from outside the bowl will go up, pushing the blade out. It works all the time, but don't forget to lube the shaft sleeve so you can lift the blade more easily.
7/6/2021 4:35:03 PM • Food Processors • Answered on Jul 06, 2021 • 525 views
0helpful
1answer

Can I use Franzus 1600 watt converter with a kitchen food processor?

Check the wattage of the processor. If it less than 1600w or 1.6Kw then it can be used. Best results is to use one that is rated at 50% higher than the load (food processor).
6/27/2021 3:45:08 PM • Food Processors • Answered on Jun 27, 2021 • 114 views
0helpful
1answer

Blade in food processor stops turning under load.

Could be a failing motor
6/19/2021 3:15:46 PM • KitchenAid Food... • Answered on Jun 19, 2021 • 155 views
0helpful
2answers

Model R602 V.V.F. How can I remove the upper case from the base of the machine?

you look for hidden screw perhaps under a label
5/9/2021 6:53:35 PM • Robot Coupe Food... • Answered on May 09, 2021 • 127 views
0helpful
1answer

Need plastic drive gear Fg 350 I am in Washington

I believe I have what you want and other parts as well for the same brand like the motor plates new blade
4/23/2021 4:07:54 PM • Nesco FG400PR... • Answered on Apr 23, 2021 • 140 views
0helpful
1answer

How I remove the base of kenwood fp 470?

https://www.manualslib.com/manual/816833/Kenwood-Fp370-Series.html?page=13#manual
4/23/2021 12:17:08 AM • Kenwood Food... • Answered on Apr 23, 2021 • 300 views
0helpful
1answer

Food Saver vs 0150. Why can't I close the lid?

check the link below for answers https://www.google.com/search?q=Food+Saver+vs+0150&oq=Food+Saver+vs+0150&aqs=chrome..69i57&sourceid=chrome&ie=UTF-8
4/16/2021 5:22:59 PM • Food Processors • Answered on Apr 16, 2021 • 128 views
Not finding what you are looking for?
Food Processors Logo

Ask a Question

Usually answered in minutes!

Top Food Processors Experts

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66948 Answers

john h

Level 3 Expert

29494 Answers

ADMIN Eric
ADMIN Eric

Level 3 Expert

39382 Answers

Are you a Food Processor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...