Exercise & Fitness - Page 7 - Answered Questions & Fixed Issues

Question moved from Microwave Oven category. This is a virtually unknown make made in Taiwan by

YIJIAN

. This link might work better for wherever you live. https://www.google.com/search?q=DK-01A+treadmill+error+E5 ..

http://ludingtoncitizen.ning.com/photo/albums/york-pacer-2750-treadmill-manual

Check the incline motor: If resetting the treadmill doesn't work, it's possible that the incline motor is faulty and needs to be replaced.

Method 1: Press Stop and Speed Up, Insert the Key To calibrate the incline, press and hold the stop and speed increase buttons. While holding the buttons, insert the safety key. The machine will now be in calibration mode. Press the Stop button once. Then, press one of the incline buttons to begin the calibration. It is recommended that you do not stand on the machine while the calibration is taking place. The machine will move to its highest incline position, then to its lowest decline position. Please wait for the machine to come to a complete stop. When the machine stops moving, the calibration is complete. Remove the safety key from the console to exit calibration mode. Method 2: Press the Stop Button, Insert the Key To calibrate the incline, press and hold the stop button. While holding the button, insert the safety key into the console. The machine will now be in calibration mode. Press the stop button once. Then, press either the incline up or incline down button to begin the calibration. It is recommended that you do not stand on the machine while the calibration is taking place. The machine will move to its highest incline position, then to its lowest decline position. Please wait for the machine to come to a complete stop. When the machine stops moving, the calibration is complete. Remove the safety key from the console to exit calibration mode.

Question edited for clarity and spelling of maker name. Question moved to model category. Help here and link to Schwinn and their support. https://www.google.com/search?q=Schwinn+A10+stationary+bike.+The+pedals+resistance+seems+stuck+on+hard ..

A reset button won't fix that unless you think it is a software glitch. This says it is the Speed Sensor. https://www.google.com/search?q=Pro-form+1450+treadmill+slows+down ..

Question edited for clarity. Question moved from cars and trucks category, It has a breaker https://www.manualslib.com/manual/858812/Horizon-Fitness-Elite-T3000.html?term=breaker&selected=1&page=3#manual https://www.google.com/search?q=Horizon+T4000+Premier+Treadmill+won%27t+start //

Question edited for clarity, correct spelling of maker and typos. Question moved from Televisions category. You need professional service. It is computer controlled. https://www.google.com/search?q=schwinn+220+red+light ..

Help in the link https://www.google.com/search?q=Cybex+750at+screen+displays+OUT+OF+ORDER ..

check wiring and sensor

Hello. I think these steps will be helpful.

1. Go to www.garminconnect.com/vivofit2.
2. Select an option: ...
3. Select the device key. ...
4. Follow the instructions on your computer or mobile device to pair your v?vofit 2 devices and complete the setup process. Krunkerio

Installing a carbon bush on a Stannah 420 stair lift requires some technical knowledge and experience, as it involves working with electrical components. If you are not familiar with stair lift maintenance and repair, it's best to contact a professional technician or Stannah service representative to ensure the proper installation and safety of the carbon bush. However, if you have the necessary skills and knowledge, follow these general steps to fit a carbon brush to a Stannah 420 stair lift:

1. Safety First: Before starting any work, ensure the stair lift is turned off, and the power supply is disconnected to avoid any electrical accidents.
2. Access the Motor Compartment: Open the motor compartment of the Stannah 420 stair lift. This is usually located under the seat or at the base of the unit. You may need to remove some screws or panels to access the motor area.
3. Locate the Carbon Brushes: The carbon brushes are small, rectangular-shaped components made of carbon and graphite, and they make contact with the motor's armature. Look for the existing carbon brushes, which might have worn down or need replacement.
4. Remove the Old Brushes: Carefully detach the old carbon brushes from their holders. This may require gently pulling them out or undoing some clips or screws that secure them in place. Take note of how the old brushes were positioned so you can properly install the new ones.
5. Install the New Carbon Brushes: Insert the new carbon brushes into their respective holders and secure them in place as per the manufacturer's instructions. Make sure they are positioned correctly and have good contact with the motor armature.
6. Reassemble: Once the new carbon brushes are in place, reassemble the motor compartment by putting back any removed panels or covers and tightening any screws that were undone.
7. Test the Stair Lift: Reconnect the power supply and turn on the stair lift. Test the unit to ensure the new carbon brushes are working correctly and that the stair lift operates smoothly.
8. Regular Maintenance: Carbon brushes wear down over time, so it's essential to perform regular maintenance and inspections to identify when they need replacement. The frequency of replacement depends on the stair lift's usage and other factors.

Again, if you're unsure about any part of this process or lack experience with stairlift maintenance, it's best to seek professional help to ensure the job is done safely and correctly.

Call the engineer for service.

try to nudge the battery cover open with a dime at the base of the u-shaped cover or try pushing outwards with both thumbs on the compartment cover

By Phone:You can order by calling our toll free number
1-800-799-8566 7 days a week 24 hrs a day!


Any questions or comments? E-mail Us at [email protected]

If the lights on your Technogym Recline Bike 500 turn on but the other settings on the display do not work, there could be a few possible causes for this issue. Here are some troubleshooting steps you can take:

1. Check Power Connection: Ensure that the bike is properly connected to a stable power source. Double-check the power cord connections and ensure that they are securely plugged into a functioning 220V power outlet.
2. Power Cycle: Try turning off the bike and unplugging it from the power source. Wait for a few minutes, then plug it back in and turn it on again. This can help reset the system and resolve any temporary issues.
3. Check Display Connections: Verify that all cables and connectors related to the display are securely connected. Inspect the connections for any signs of damage or loose connections. Ensure that the cables are properly inserted into their respective ports.
4. Reset the Console: If the issue persists, try resetting the console or display unit. Refer to the user manual for your Technogym Recline Bike 500 to find specific instructions on how to reset the console or perform a factory reset. Typically, this involves accessing the settings menu on the display and selecting the appropriate reset option.
5. Software Update: Check if there are any available software updates for your Technogym Recline Bike 500. Visit Technogym's official website or contact their customer support for information on firmware updates. Updating the software may resolve any known issues or bugs affecting the display functionality.
6. Contact Technogym Support: If the above steps do not resolve the issue, it is recommended to contact Technogym's customer support directly. They have access to specific troubleshooting steps and can provide further guidance based on their knowledge of the Recline Bike 500. They may be able to diagnose the issue remotely or recommend further solutions.

When contacting customer support, provide them with detailed information about the issue, including any error messages or specific symptoms you are experiencing. This will help them provide more accurate assistance and advice. Remember to follow safety precautions and consult the user manual for your specific model when attempting any troubleshooting steps or maintenance tasks.