Electronics - Others - Answered Questions & Fixed Issues


SADLY NUMBERS DO NOT TELL ME WHAT YOU HAVE THAT IS GIVING YOU THE FAULT CODE EVEN GOOGLE SOMETIMES CAN NOT GUESS WHAT IT IS IF ANY TYPOS ARE MADE

Delta... | Answered 2 days ago | 23 views


A little more context would have helped, but I strongly suspect that it is referring to Over Current Protection. That is to say, your inverter has built-in circuitry that will shut it down if you try to draw too much power from it. Think of it like the fuse or circuit breaker on your home wiring.

The OCP for most inverters is re-settable - either automatically (that is, a few seconds after you remove the overload, it starts working again) or manual (a button to press, or you turn the inverter off and back on).

Inverter... | Answered on Mar 12, 2019 | 31 views


I moved you out of computers, to Baldor motor drives.

why not get the free manual and read it first?
Im sure it covers errors.

Inverter Baldor... | Answered on Mar 10, 2019 | 24 views


Sorry, but that's not very specific.

Most USB memory sticks (aka thumbdrives) are "plug-and-play." Meaning you stick them in a USB host socket on a PC (MAC or Windows or Linux, for example) and they automatically get configured and are available for use - just as you would use a computer hard drive.

If that is not happening, then there is a good possibility that the stick is not properly formatted. If it is recognized, but you cannot access the data, then you may need to run the FORMAT utility on your computer. Be aware that this will erase any data currently on the stick.

If you KNOW that you have data on the stick, and it is important to you, then there are data recovery companies that will do their best to access the data (for a fee).

Electronics -... | Answered on Mar 05, 2019 | 602 views


Solar system? Did you mean "solar panel system"?

Unfortunately, some of your other terms are also a bit off. But let's see what we can clarify.

Battery capacity (whether a single, or a bank of batteries) is measured in kilowatt hours. A bank that is rated for 3.55 KwH will produce 3.55 kilowatts for one hour (at least in theory), or 10 watts for 355 hours, or any combination therein. The average home draws about 1.5 Kw (that's *average* - day and night), but much higher during the day (electric lights, appliances, etc. all turned on). So, very roughly, your battery bank is good for a couple of hours of average use - but might handle a home all night with minimal draw.

Sorry, but your final question is not answerable. A 48 volt system is 73 amps to do a full recharge during an hour. But that's too high a recharge rate for most systems. And batteries are not 100% efficient (figure on about 120% - or it will take about 4.25 KwH to charge a battery to 3.55 KwH. So the first issue is how quickly do you want the batteries to recharge.

Panel output varies widely (as does cost). And the amount of sunshine varies not only in duration, but also amount (an hour of sunshine on a clear day in Texas is worth more than an hour of sunshine on a clear day in North Dakota - although North Dakota may appreciate it more <G>). If you want to maintain the batteries, then figure on around 250 square feet of panels - but understand that this answer could be off by a factor of two or more - just depending on conditions.

Solar... | Answered on Mar 05, 2019 | 348 views


PERHAPS BUYING ONE

Electronics -... | Answered on Mar 05, 2019 | 26 views


Do you still have the command board?

Xantrex... | Answered on Mar 01, 2019 | 627 views


now thats a cool story

Electronics -... | Answered on Feb 22, 2019 | 54 views


That watch is referred to as Casio Module 2705 (AW-E10) and the manual for it lists the battery as an SR920W, which has several crosses including to AG6. This doesn't seem to be a very common battery, certainly most or all of my other watches don't use that particular battery.

Electronics -... | Answered on Feb 15, 2019 | 206 views


HAVE NEVER SEEN A THUMB DRIVE WITH WRITE PROTECT ON YET

Transcend... | Answered on Feb 14, 2019 | 26 views


ACTUALLY , ONLY YOU CAN FIND OUT AS MANY POWER COMPANIES WILL BUY WHAT YOU PRODUCE IF YOU ARE USING THEIR SYSTEM FULL TIME .OTHERWISE THEY WOULD HAVE NO WAY OF GETTING YOUR POWER

Solar... | Answered on Feb 11, 2019 | 45 views


Not knowing the model # makes it difficult to give you a difinitive answer. Kingston's support docs all say that after x mny failed logins the device will have to be formatted.
The default # of failed logins seem to be 10.
I think you're out of luck.

Kingston... | Answered on Feb 05, 2019 | 77 views


This sounds like it may be a formatting problem. Can you format the SD card on a computer? Select Fat32 as the format type.

SanDisk 8GB... | Answered on Feb 05, 2019 | 209 views


Request from the manufacturer.

Electronics -... | Answered on Feb 03, 2019 | 38 views


First I assume that you thinking about kVa not KV? or you really have 10000 Volts generator?

why would you like to add inverter? Considering your setup there is no need for inverter.
the only way you need inverter is when you have dedicated battery bank. This way system would work this way. On sunny day you produce electricity to feed your house and charge battery bank using charger/inverter. Once solar panels atop producing electricity during night system automatically switches to inverter mode and you start using power from batteries. Once batteries goes low then generator kicks in and supply power to home and recharge batteries. Without dedicated batteries there is no use for inverter

Inverter... | Answered on Feb 02, 2019 | 28 views

Not finding what you are looking for?
Electronics - Others Logo

Ask a Question

Usually answered in minutes!

Top Electronics - Others Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Marvin
Marvin

Level 3 Expert

84027 Answers

Brad Brown

Level 3 Expert

18002 Answers

Are you an Electronics - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...