Dishwashers - Answered Questions & Fixed Issues

Try using tablets or jell instead of power.

Dishwashers | Answered 2 hours ago | 20 views

Hold down Eco and Auto buttons together to enter program selection mode.

Dishwashers | Answered 9 hours ago | 27 views

It go’s in the soap dispenser located inside the door. Be sure to close it’s lid after adding detergent.

Danby... | Answered 9 hours ago | 20 views

F1 error (On a Fisher Paykel dishdrawer means there has been a water leak and its triggered the flood device. The machine wont let you use it as a safety precaution. You need to get an F&P Tech to look at it before it causes more damage. Often the drawer seals fail or the heater plate springs a leak.

Dishwashers | Answered Yesterday | 14 views

Your danby dishwasher has 2 motors. One for draining and one for washing. Sounds like your washing pump went bad since u said water goes in and out

Danby DDW497W 22... | Answered 2 days ago | 131 views

Hi, do you have happen to have a garbage disposal? These are linked together and cause this type of odor. You might also need to change the filter if it is getting old. Running white vinegar through the dishwasher may be another option if the cleaner your using isn't working for very long. Good luck!

Dishwashers | Answered 2 days ago | 15 views

i had the exact same issue. it's a broken latch mechanism, and is a fairly common problem.

i bought the part at my local repair shop for $45 (you can find it online for $30). it literally took 10 minutes.

you need to right size bit to remove the 10 bolts on the interior of the door. once you have those out, the latch slides right out of the top. there are 2 electrical connectors (careful - you can get a shock. disconnect the 2 connectors, reconnect to the new one, and zip your 10 bolts back in. super easy

Jenn-Air 24 in.... | Answered 3 days ago | 4,308 views

First make sure your drain line is free and clear. A lot of detergents will plug the drain after time.

Dishwashers | Answered on Mar 19, 2019 | 17 views

Many owners of the Bosch dishwashers perceive h01 (h: 01) or h02 (h: 02) and other signs as an error. But in fact, this is not an error, and you accidentally got into the start-up timer menu (delayed start of washing dishes). In this case, h01 means that washing dishes will start exactly in 1 hour; if the display shows h02, then washing process will begin exactly in 2 hours. As a rule, in most models of dishwashers from Bosch, a delayed start can be set in the range from 1 to 24 hours.

Bosch... | Answered on Mar 19, 2019 | 17 views

E15 fault is water into base and has activated the anti flooding device.
You will need to remove the water from base and investigate for leaks.

Bosch 24 in.... | Answered on Mar 18, 2019 | 3,310 views

Is it level ? Sometimes dishwashers need to be tilted back ever so slightly. This can be done with the front adjustable feet.

Miele... | Answered on Mar 18, 2019 | 27 views

Huh??? Salt compartment and dishwasher...what's the connection??? Your problem description leaves much to be desired... Sorry.

Dishwashers | Answered on Mar 17, 2019 | 17 views

You will need to start by downloading the correct manual from a website, (try e spares )

Dishwashers | Answered on Mar 17, 2019 | 18 views

Not finding what you are looking for?
Dishwashers Logo

Ask a Question

Usually answered in minutes!

Top Dishwashers Experts


Level 3 Expert

4356 Answers


Level 3 Expert

84027 Answers

Brad Brown

Level 3 Expert

18002 Answers

Are you a Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides