Dishwashers - Page 6 - Recent Questions, Troubleshooting & Support

using tape measure measure your item of here is dimensions. you can buy a DW that is 24 inches wide, very easy to do. It is a standard size DW Width 23.875" Depth 24.5" Height 33.875"

Make and model number of machine, may help you get an answer.

ground faulty connection problem on the dishwasher . check all ground connections on dishwasher

Try a mainboard Reset. Pull the mains plug before bed tonight. Tomorrow, press and hold the on button for 30 seconds, then let go and plug it back in. ..

need model number to assist ---do online search using make and model

The spring probably broke in the latch, or the door balance springs are slack. You have to pull it out and removed the side panels. The latch literally just holds it in place. You should be able to tell if the springs are holding the weight of the door though. Then split the door to inspect the latch.

If the water is coming out from around the loading door:-
1) check the door latch mechanism is correctly adjusted to close the door properly on to it's seals,
2) if above ok, you need new door seals.

If the water is coming from under the unit (at floor level) you have a leaking hose or fitting on the water supply valve or pump/s.

If the door is not damaged probably yes.

Craig, we had virtually the same situation.  The repair man  came and it took 2 minutes to fix.  The problem was that the bottom drawer had not been used for a couple of years and thus the impellor had jammed.  to fix it take out the basket, lift off the rotor arm and unscrew the knob.  Then just work the impellor around with your fingers until it frees.  It then worked perfectly.  We will use the bottom often from now on to prevent this happening again. By now the left over pumpkin pie will be a bit green!!

Try these links. Sometimes they work better in the country where the owner is. https://www.google.com/search?q=homemaker+dishwasher+HM0607+manual and https://www.google.com/search?q=homemaker+dishwasher+model+HM0607 ..

Full 'make model (what it is)' in all question please. Generic E4 Error fixes The E4 error code relates to there is too much water via the inlet or a possible leak. You have acted correctly by checking the fitting and joints for leaks.Jun 16, 2021

My dishwasher keeps throwing the code e4. I've checked all

JustAnswer https://www.justanswer.com > Appliance Repair ..

Meiko Generic Error. It is Conveyor Overload

Operating instructions MIKE 3 - CE

meiko-global.com https://partnernet.meiko-global.com > download Error number 701. Conveyor overload. Basket transport rail is sluggish. The wash items is stuck in the transport mechanism. In such a case the malfunction must ... https://www.google.com/search?q=Meiko+DV+125.2+error+701 ..

Yes according to this link, Booster heater. https://www.google.com/search?q=Meiko+DV+200.2+Error+205 Manual just for fun, but it only show 4 codes and stops ar Error 203. https://static-pt.com/modelManual/MEI-DV200-2_iom.pdf?v=1532002611112 No Service Manual available. Which is odd when it says this washer is for cruise ships! ..

To me the Error is telling you Probe Error - Wash - Power - Drain CL & CLe Series Dishwasher Display Codes Below are common codes that display on Hobart CL and Cle Series Dishwashers:

• Door(s) Open - This displays if one or both doors are open. Close all inspection doors.
• Clear Conveyor Jam - The code appears if there is a jam. Remove the rack from the machine. Then, press START and rerun the rack.
• Probe Err - TANK - Check if the lower float assembly in the displayed tank isn't visibly damaged and that the proper amount of water is covering the lower float in the tank.
• Probe Error - FnlRns - Make sure the supply water valve to the rinse booster is open.

More here and a video https://www.google.com/search?q=Hobart+PROBE+ERROR-WASH+PW+DR https://www.hobart.com.mx/pdf/FichaTec/F-40196.pdf Service Manual https://hvac-talk.com/vbb/attachment.php?s=219f76d9e796c2e5f1c5fef6b79fad9d&attachmentid=830275&d=1639784925 from here https://hvac-talk.com/vbb/threads/2234701-Hobart-Service-Manuals ..

Hi I think I’ve got the same problem that the overflow plastic tray didn’t move down due to dirt. See pic. Anybody an idea how to open/ remove and clean this tray on Electrolux dishwasher?

Leak detector on bottom of machine has got wet
Un plug machine and dry float on leak detector
Or turn machine on its side allow water to drain off flood device
Important make sure no power going to machine while doing this

no info generic answer --water supply --valve fail -circuit wire damage

ecomomy and normal wash lights blinking

I had the same problem after replacing the white panel on my Bosch SHE45M02UC with a stainless panel. I got the C6 error code. I called Bosch customer service twice and neither rep was helpful. One guy told me he didn't know what the C6 code meant. He suggested that I call a local appliance repair guy and he would know what the code meant. I replied, you mean to tell me you work for the manufacturer of the dishwasher and don't know what the error code stands for but a local repair guy that doesn't work for Bosch does?After all this frustration, I took the panels off and tested the dishwasher with no buttons. It worked fine! Turns out, each identical button isn't identical. Each one is labeled A-G. After putting it back together, no more C6 code! On a side note, try reseting the dishwasher. With the dishwasher on and door closed, hold down the cancel/reset buttons for 5 seconds and release. The disher should drain and reset.

Do the same again. It is a Toggle On, Toggle Off. Normally Press and hold for 3 to 5 seconds.

How do I set the child lock feature? - Dishwashers

Frigidaire https://www.frigidaire.ca > ... > FAQs > Dishwashers Press and hold DELAY START for 3 seconds. An indicator light on the lock graphic pad will illuminate when the controls are locked and no new selections can be made.. ..