Cameras - Page 8 - Recent Questions, Troubleshooting & Support
I got a Passonic Lumix DMC-TZ30 and it says "Mode dial is not in the proper position
Make sure the picture of the setting you are using on the turn dial is lined up with the beige pointer on the top of the camera. When you turn the dial, you can feel it lock into position. It could be that the dial hasn't quite clicked into the right position and just needs adjusting
https://www.avforums.com/threads/panasonic-tz3-mode-dial-is-not-in-the-proper-position-repaired.1419963/
JVC GR-FXM40EK camera will no longer turn on.
Battery for cameras are normally made a specific shape or size so they only fit that camera and yours is just like that. The batteries to wear out and degrade so much that they came be fully charged (or never charge) and dissipate that power in 4 minutes from full to 'not enough power to operate'. The only difference with batteries is the number of Milli Amp Hour figure, the more mAh, the longer the camera works on a charge. The spec on yours is
GR-FXM40EK Camcorder Battery 6 volts 2100mAh
It was launched in 2003 and has probably been sitting in a cupboard for 10 years. The first thing to do it get a replacement battery and charge it up. In the leads that you got with it, there may be one to run it on mains power through an adapter. A battery is $10 a battery and charger is $33.
https://www.psaparts.co.uk/camcorder/jvc/gr-fxm40ek-battery-adapter-charger.html
https://www.google.com/search?q=JVC+GR-FXM40EK
..
10/20/2023 4:59:28 PM •
JVC Cameras
•
Answered
on Oct 20, 2023
How can i get chain for Bauholtz pole saw 27564
Sadly we don't have this sort of information. Have you tried contacting Bauholtz directly? You could also ask at some power tool specialist repairers as they may be able to suggest other replacements. As to the cost of delivery, only the company you buy it from can tell you that!
10/12/2023 4:39:59 PM •
Cameras
•
Answered
on Oct 12, 2023
Canon Digital IXUS 500 5.0MP is not powering on when CF card inserted.
In general Compact Flash Cards have to be formatted within the camera that is using them as they use a format proprietary to that camera. Also there are size limits on cards. If your camera will only take 16 Mb cards and you put a 32 Mb card in, it will not read it. It sees it as 'No Card Present'.
I think the other answer is an AI Answer Bot.
Not finding what you are looking for?