Dehumidifiers - Page 2 - Recent Questions, Troubleshooting & Support

Maybe this will help; https://housefresh.com/dehumidifier-not-collecting-water/

If water is coming out on the floor from your Comfort Site dehumidifier even when the bucket is not overflowing, there may be a few possible causes for this issue:

1. Improper Placement of the Bucket: Ensure that the bucket is correctly positioned and inserted into the dehumidifier. Make sure it is securely in place, and the water outlet on the bucket is aligned with the dehumidifier's drainage system. If the bucket is not properly seated or aligned, it can result in water leakage.
2. Bucket Seal or Gasket: Check the bucket's seal or gasket for any signs of damage, wear, or misalignment. If the seal is compromised or not making proper contact with the dehumidifier's body, water can escape and leak onto the floor. Clean the seal and ensure it is free from debris or obstructions. If necessary, replace the seal or gasket with a compatible replacement part.
3. Drainage Hose Connection: Some dehumidifiers have the option to connect a drainage hose directly to the unit for continuous draining. If a drainage hose is connected, make sure it is securely attached and there are no leaks or loose connections along the hose. Ensure that the other end of the hose is properly directed into a drain or receptacle.
4. Internal Drainage System: The dehumidifier's internal drainage system, including the collection tray or drain pan, may be clogged or blocked. Remove the bucket and inspect the drainage area for any debris, buildup, or blockages. Clean the drainage system thoroughly, ensuring that water can flow freely from the collection tray into the bucket without any obstructions.
5. Check for Excessive Humidity: If the dehumidifier is operating in an area with extremely high humidity levels, it may struggle to remove moisture effectively. This can result in excessive condensation or water buildup that leads to leakage. Consider using additional dehumidification methods or addressing the underlying humidity issue in the space.

If the issue persists after checking these potential causes, it is advisable to consult the user manual for your specific Comfort Site dehumidifier or contact the manufacturer's customer support for further assistance. They can provide specific troubleshooting steps or offer guidance based on their knowledge of the product.

The easy way is to turn it upside down. Leave 12 hours before turning back on. Or you can removed the back panel and then the side panels. The screws are hidden under small removeable plugs. Or you can use one of these to reach in and grab it. https://www.walmart.ca/en/ip/Agiferg-Flexible-Long-Reach-Claw-Pick-Up-Narrow-Bend-Curve-Grabber-Tool-Spring-Grip-80cm/1Z9FN1CNSYCW ..

If your Norpole dehumidifier is repeatedly starting and stopping, it could indicate a problem that needs to be addressed. Here are a few troubleshooting steps you can try:

1. Check the humidity settings: Ensure that the humidity level set on the dehumidifier is reasonable and not too low. If the desired humidity level is already reached, the dehumidifier may turn off until the humidity rises again.
2. Clean the air filter: A dirty or clogged air filter can restrict airflow and cause the dehumidifier to overheat. Turn off the dehumidifier, unplug it, and locate the air filter. Remove the filter and clean it according to the manufacturer's instructions. Allow it to dry completely before reinstalling it.
3. Check the water collection bucket: If the water collection bucket is full, the dehumidifier may automatically shut off. Empty the bucket and ensure it is properly positioned back into the unit.
4. Verify the drainage system: If your dehumidifier is equipped with a continuous drainage option, make sure the drainage hose is properly connected and not clogged. If the drainage hose is obstructed or improperly installed, it can cause the dehumidifier to turn on and off.
5. Ensure proper ventilation: Make sure the dehumidifier is placed in a well-ventilated area. Restricted airflow around the unit can lead to overheating, triggering the auto shut-off feature.
6. Power supply issues: Check the power cord and make sure it is securely plugged into a functioning power outlet. Also, ensure there are no issues with the circuit breaker or electrical supply.

If none of these steps resolve the issue, it's recommended to consult the user manual or contact Norpole customer support for further assistance. They will be able to provide more specific troubleshooting steps or advise on potential repairs or service options.

Question edited for clarity.Question moved from Refrigerators to Goldstar Dehumidifier.Just Answer, says it pulls straight out.Check if it was on the Recall list? Melted plastic would stop it coming out. It was listed as a fire hazard.https://www.google.com/search?q=Gold+Star+3850A20500FTrying to find a manual for it, but your 'model' number seems flawed.https://www.google.com/search?q=Gold+Star+3850A20500F+manual..

copy and paste link page 21, also in your manual. https://www.honeywellstore.com/store/images/pdf/honeywell-tp-series-dehumidifier-manual.pdf

Question edited to add full 'make model (what it is)'. Some models have a bucket, and some don't as it can be optional. Its capacity is 30 pints per day. The manual and the specs for the 3 models in the range are in the link. https://manualzz.com/doc/2052238/goldstar-dh3010b-dehumidifier-user-manual ..

Not a problem, they are full of plastic.

Jay, Check here... https://www.appliancefactoryparts.com/airconditioners/everstar/mpn1-095cr-bb6.html#Hoses,-Valves,-and-Regulators Best to you.

Step 1: Reset the printer

1. With the printer turned on, disconnect the power cord from the rear of the printer.
2. Wait at least 60 seconds.
3. Reconnect the power cord to the rear of the printer.
4. Turn ON the printer, if it does not automatically turn on.
5. Wait until the printer is idle and silent before you proceed.

Step 2: Update the printer firmware Click here to know different methods of updating printer firmware. Step 3: Printing Documents You can resolve the error by canceling the print job, and then changing the print settings in the printing software.

• Frist, Press the Cancel button to cancel the print job or clear the error.
• Then, change the paper settings to match the loaded paper in the printer, Refer HP Printers - Printing Documents (Windows)

https://evaly.com.bd/products/baseus-hd-convex-blind-spot-auto-rearview-car-mirror-silver-8458491

Pause is not a term ive seen on a dehumidifier , but one would assume that its waiting for something to occur in that mode , and with these the only logicial reason to wait is to "wait" for Moisture to return to room , maybe your room has been voided of %rh to the setting on unit and its waiting for more water to return ??

Parts Suppliers. Replacing the sensor seems to be the fix. https://www.google.com/search?q=Noma+Dehumidifier+043-5795-6+Parts+sensor

You can find the manual for the Garrison dehumidifier model 043-5434-6 by visiting the manufacturer's website or by searching for it online. Here are the steps to find the manual online:

1. Open your web browser and go to the Google search engine.
2. Type "Garrison dehumidifier model 043-5434-6 manual" in the search bar and hit enter.
3. Several websites will appear in the search results. Look for a website that offers the manual for download or viewing.
4. Click on the link to download or view the manual.

If you are still having trouble with your dehumidifier even after consulting the manual, you may want to consider contacting the manufacturer for assistance or bringing the unit to a professional for repair.

There could be several reasons why the humidity reading on the digital control is not accurate. Here are a few things you can try:

1. Calibrate the hygrometer: The first thing to do is to make sure that the hygrometer you are using to measure the humidity is calibrated correctly. You can check this by placing the hygrometer in a sealed container along with a wet sponge or cloth for a few hours. The hygrometer should read close to 100% humidity. If it doesn't, then it may need to be calibrated.
2. Check the humidity sensor: The humidity sensor in the incubator may be faulty or dirty. You can clean the sensor with a soft cloth or replace it if it is damaged.
3. Check the water level: Make sure that the water level in the incubator is sufficient. If the water level is low, the humidity will be low as well.
4. Check the ventilation: The ventilation in the incubator should be set to allow for proper air exchange. If the ventilation is not set correctly, it can affect the humidity level.
5. Check the room conditions: The room conditions, including temperature and humidity, can affect the humidity level in the incubator. If the room is too dry, it can affect the humidity level in the incubator. You may need to adjust the dehumidifier or add a humidifier to the room to maintain the proper humidity level.

The flashing pause light on your DeLonghi dehumidifier indicates that the unit is in a defrost cycle. During this time, the compressor shuts off and the fan continues to run in order to thaw any ice that may have formed on the coils. This process typically lasts for 10-15 minutes before the unit resumes normal operation. If the pause light continues to flash even after the defrost cycle is complete, it may indicate a problem with the unit's sensor or control board. In this case, it is recommended to consult the user manual or contact a professional for assistance with troubleshooting and repairs.

There are several reasons why your T2 Direct Dehum 3 dehumidifier may be alarming after running for a few seconds:

1. Dirty or Clogged Air Filter: A dirty or clogged air filter can cause the dehumidifier to overheat and shut down. Check the air filter and clean or replace it if necessary.
2. Defective Humidity Sensor: If the humidity sensor is defective, it may cause the dehumidifier to shut down. The sensor may need to be replaced.
3. Faulty Compressor: A faulty compressor can cause the dehumidifier to shut down after running for a short time. You may need to replace the compressor.
4. Low Refrigerant Charge: If the refrigerant charge is low, it can cause the dehumidifier to shut down. You may need to recharge the refrigerant.
5. Faulty Control Board: A faulty control board can cause the dehumidifier to shut down or display error messages. You may need to replace the control board.

It is recommended to contact a qualified technician to diagnose and repair the issue with your dehumidifier.

Just adding this as I found a basic design fault with my CD30... basically the defrost function runs after about 50 mins of operation, but what was happening was the unit was cutting off (because it had lowered the humidity to the set level) before the 50 mins had elapsed. The unit would then start again (with the coils still iced up) but never run for the 50 minutes needed to activate the defrost.. so a massive iceberg ended up building on the back of the unit! I modified the wiring of the unit so that the timer board is always powered, and the humidistat switches the neutrals of the compressor, fan and solenoid. This has totally cured the problem. Any decent electrician would be able to do this mod in a few minutes. I think the defrost circuit design has changed on newer models (probably because it was rubbish!!)

If your Midea Cube 20-Pint Smart WiFi Dehumidifier is stuck on "Water Level 50%" even though the tank has been emptied multiple times, you can try the following steps to reset it:

1. Unplug the dehumidifier from the power source and let it sit for 10-15 minutes.
2. While the dehumidifier is unplugged, remove the water tank and check for any obstructions in the water tank outlet or on the float switch.
3. Clean the water tank with warm water and mild detergent, then dry it thoroughly before replacing it in the dehumidifier.
4. Plug the dehumidifier back in and turn it on. If the water level indicator still shows 50%, try pressing and holding the "Water Level" button for 3-5 seconds to reset the sensor.
5. If the issue persists, try performing a factory reset on the dehumidifier. To do this, press and hold the "Timer" and "Mode" buttons simultaneously for 3-5 seconds until the display panel shows "F". Then, press the "Power" button to turn the dehumidifier off, unplug it from the power source, and wait for 5-10 minutes before plugging it back in and turning it on.

If none of these steps resolve the issue, it may be necessary to contact Midea customer support for further assistance or to have the unit serviced by a professional.