Video Cameras - Page 7 - Recent Questions, Troubleshooting & Support

You can't directly connect the JVC GR-AXM205 camcorder to a computer. You can connect it to a USB (or internal) AV video capture card. See the manual here: https://www.manualslib.com/products/Jvc-Gr-Axm405-246960.html . The video and audio output ports are shown as 22 and 23 here: https://www.manualslib.com/manual/80789/Jvc-Gr-Axm205.html?page=52#manual . I hope this helps. Cindy Wells

The Panasonic PV-GS120 is an older model of digital camcorder, which was released in 2005. The driver is the software that allows the camera to communicate with your computer and allows you to transfer video footage from the camera to the computer. If you need to transfer video footage from your Panasonic PV-GS120 to your computer, you can use the USB cable that came with the camera to connect it to the computer. The computer should automatically recognize the camera and install the necessary drivers. If you are using a newer version of Windows, the camera may not be compatible, and you will not be able to transfer the video footage to your computer. In this case, you can use a third-party video capture device to transfer the footage. Alternatively, you can try to download a driver from the Panasonic website, however, keep in mind that since this is an older model of camera, the driver may not be available on the website anymore. If you can't find the driver on the website, you can try using a third-party driver update software to automatically scan your computer for the necessary driver and install it. It's important to note that even if you are able to install the driver and transfer the footage to your computer, it may not be compatible with newer versions of video editing software.

He may have deleted his account, but his Answers remain. Click on his name and it will show all his posts. Like this Posted by Mark on Jan 21, 2023 See how long the last one was made. If there is a recent one, click Comment under his answer and ask him if he is able to help you? I did find this and it is 2013 https://www.fixya.com/support/t17150785-need_contact_rick_j_riggins_about_canon Aha! Here you go! Denver Colorado

Nikon lens repair item (Page 2): Good suggestion. Rick is a member ...

https://www.uglyhedgehog.com > ... Rick is a member here, and he has done good work for me, too. Rick J Riggins Discount Camera Repair 1939 S. Quebec Way #203. Denver, CO 80231 (303) 669-0945

Yes, it is possible to connect your Sony CCD-TRV46E camcorder to a computer. In order to do so, you will need a few things:

1. A video capture device: This device converts the analog video signal from your camcorder into a digital format that your computer can understand. There are several types of video capture devices available, such as USB capture devices, FireWire capture devices, and HDMI capture devices.
2. A cable to connect the camcorder to the video capture device: The cable you need will depend on the type of video capture device you choose. For example, if you choose a USB capture device, you will need a USB cable. If you choose a FireWire capture device, you will need a FireWire cable.
3. Software to control the capture process: There are many software options available that can be used to control the capture process, such as VLC, Windows Movie Maker, Adobe Premiere, etc.

It seems that you have a cable that connects the camera to the power supply, and another one that is not supposed to connect to anything. To connect your Sony CCD-TRV46E to a computer you will need a specific cable called AV cable (Audio Video cable) that has a yellow plug for video, white and red for audio and a small round plug for power. Please double check the user manual for your camera and make sure that it supports the transfer of video to a computer before you buy the AV cable or the video capture device.

I have worked my cam out (Maxim MX700) if anyone requires help please let me know

USB transfers for both Windows and Macintoshes are covered in the software guide at this link

jvc link

Download and install adobe reader if needed

Right mouse click and save target as for each manual to save in a file.

Read appropriate parts of software guide (36 pages total in the manual you do not need to read them all) covers file downloads.

If your Canon MV940 digital video camcorder is not charging when you plug it in, there are a few things you can check to try to determine the cause of the issue:

1. Check the power adapter: Make sure that the power adapter is securely plugged into the camcorder and that the outlet you are using is working. Also, check that the adapter is not damaged or malfunctioning.
2. Check the battery: Make sure that the battery is inserted correctly and that it is not damaged or worn out. If the battery is old or has been used for a long time, it may no longer hold a charge and will need to be replaced.
3. Check the charging port: Make sure that the charging port on the camcorder is clean and free of debris. If there is debris blocking the port, use a soft-bristled brush or a can of compressed air to clean it out.
4. Check the battery terminals: Make sure that the terminals on the battery are clean and free of debris or oxidation. Clean the terminals using a soft-bristled brush or a pencil eraser.
5. Check the firmware: If the problem persists, check to see if your camcorder's firmware is up to date. If it isn't, update it.

If you've tried all of these steps and you still cannot charge your camcorder, it's possible that there is a hardware issue with the camera. In this case, you may need to contact Canon support for further assistance. https://amzn.to/3WisSDI

Why not try a movie downloader to help you? With movie downloader, you can download movie in three ways:

Method one:
Type name of the movie you want to the search box of Video Download Studio. It will help you to
search your movie from thousands of movie & video websites. The search result
comes from more than 100 countries and the areas. If you want to search movies in
other languages, for instance, Chinese, German or Japanese, you only need to type the
movie’s corresponding name and then you can obtain many search results.

Method two:
If you already have the URL of that movie, then you could just copy the URL and click
on the “add URL” button, Video Download Studio will download the movie for you with high
quality in fast speed.

Method three:
If the movie you want to download is playing on the web site, then you could click”
auto capture”. Video Download Studio designs with the latest technology; it will automatically
detect and download the movie for you.
Click to get a free version from the official site: http://www.downloadvideos-convert.com/download-videos-music

1. To transfer video footage from your Canon MV830i camcorder to your Macbook, you will need a FireWire cable and a FireWire USB adapter. This cable connects the camcorder to your computer, and the adapter allows the FireWire connection to be recognized by your Macbook. You can find this cable and adapter on Amazon or other electronics retailers.
2. To transfer the footage to your computer, you can use the built-in iMovie software on your Macbook. This software lets you capture the footage from your camcorder and import it into the program for editing.
3. You can reuse the tapes by recording the footage you have already captured. Make sure you have transferred the footage to your computer before recording it.
4. Some other advice:

• Make sure your camcorder is in VCR or VTR mode before connecting it to your computer.
• Test the connection and transfer process before filming important footage.
• Check the manual of the camcorder for detailed instructions on how to transfer footage.
• Be patient; transferring footage from a camcorder to a computer can take some time.

Remember that transferring footage from a camcorder to a computer can be a bit complicated, but with some patience and practice, you'll get the hang of it. Remember always to consult the manual of the camcorder for detailed instructions and always keep your computer and software updated.

The best option would be to contact the manufacturer or a authorized service center for assistance. They may be able to provide you with a wiring diagram or instructions for rewiring the camera, or they may be able to repair or replace the camera for you. Alternatively, you can also look for a professional technician who is experienced with security cameras and can help you with rewiring the camera. They may be able to create a wiring diagram or guide you through the process of rewiring the camera based on their knowledge and experience.

If your ES8400 camcorder is not displaying a picture in the viewfinder while recording, there could be a problem with the viewfinder itself or with the camera's internal components. Here are a few things you can try to fix the problem:

1. Make sure that the viewfinder is properly adjusted. The viewfinder may need to be adjusted to your eyesight to ensure a clear image.
2. Check the viewfinder for any visible damage or debris. If the viewfinder is damaged or clogged with debris, it may not be functioning properly.
3. Check the camera's internal components for any visible damage or debris. If the camera's components are damaged or clogged with debris, it may be affecting the image in the viewfinder.
4. If the problem persists after trying these steps, it may be necessary to have the camcorder inspected by a technician to determine the cause of the issue.

If you are not comfortable troubleshooting the problem yourself, it is recommended that you contact the manufacturer for assistance. They may be able to provide further guidance or offer repair options.

If you are unable to establish a video link to Camera 2, there may be an issue with the connection or with the camera itself. Here are a few steps you can try to troubleshoot the issue:

1. Make sure that the camera is turned on and properly connected to the device you are trying to link it to.
2. Check the connections between the camera and the device to make sure that they are secure and functioning properly.
3. If you are using a wireless connection, make sure that the camera is within range of the device and that there are no obstructions blocking the signal.
4. Try restarting both the camera and the device to see if that resolves the issue.
5. If the problem persists, there may be an issue with the camera itself. You may want to try contacting the manufacturer for further assistance.

I hope this helps! If you have any further questions or if you are having trouble establishing a video link to Camera 2, don't hesitate to ask.

If the lens on your Samsung SC-D353 camcorder is foggy, there are a few steps you can try to clear it:

1. Clean the lens using a lens cleaning solution and a soft, lint-free cloth. Be sure to gently wipe the lens in a circular motion, taking care not to scratch it.
2. If the foggy appearance persists, there may be moisture inside the camcorder. You can try using a hair dryer or a can of compressed air to blow out any moisture that may be trapped inside the camcorder.
3. If the foggy appearance is still present after trying these steps, there may be an issue with the lens itself. In this case, you may need to have the camcorder serviced by a professional.

I hope this helps! If you have any further questions or if you are having trouble clearing the foggy lens on your camcorder, don't hesitate to ask.

To open and remove a stuck cassette from a Memorex 16-854 camcorder, you will need to follow these steps:

1. Locate the cassette compartment on the camcorder. It is usually located on the side or back of the camcorder and is marked with an icon that looks like a cassette.
2. Open the cassette compartment by pressing the release button or lever.
3. If the cassette is stuck, you may need to gently wiggle it or use a small tool, such as a pen or paperclip, to gently pry it out of the compartment.
4. If the cassette is still stuck after trying these steps, you may need to use a little more force to remove it. Be careful not to damage the camcorder or the cassette.

I hope this helps! If you have any further questions or if you are having trouble removing the stuck cassette from your camcorder, don't hesitate to ask.

The serial number on a Panasonic HC-V800 camcorder is usually located on the bottom of the camcorder, near the battery compartment. It is typically a series of numbers and letters that is engraved or printed on a sticker. Here are the steps you can follow to locate the serial number on your HC-V800 camcorder:

1. Turn the camcorder upside down so that the bottom is facing up.
2. Locate the battery compartment and look for the serial number near it.
3. If you are unable to find the serial number on the bottom of the camcorder, you can try looking on the side or back of the camcorder. It may be located near the connections or the memory card slot.

I hope this helps! If you have any further questions or if you are having trouble finding the serial number on your camcorder, don't hesitate to ask.

If your Canon ZR85 camcorder is not recognizing that a tape is present, there are a few steps you can try to troubleshoot the issue:

1. Make sure that the tape is properly inserted into the camcorder. If the tape is not properly seated in the camcorder, it may not be recognized.
2. Check the tape for any visible damage or wear. If the tape is damaged, it may not be recognized by the camcorder.
3. Clean the heads of the camcorder using a head cleaning cassette or a cleaning solution designed for camcorders.
4. If the camcorder has a manual tape loading mechanism, make sure that the mechanism is properly aligned and functioning.
5. If the problem persists, there may be an issue with the camcorder itself. You may want to try contacting Canon customer service for further assistance.

I hope this helps! If you have any further questions or if you are having trouble troubleshooting the issue, don't hesitate to ask.

It is possible to find spare parts for recording heads and DV tape jack mechanisms, but availability may vary depending on the specific make and model of your camcorder. Here are a few options you can try to find the spare parts you need:

1. Contact the manufacturer of your camcorder to see if they have the spare parts available for purchase.
2. Check with a local camera repair shop to see if they have the spare parts or can order them for you.
3. Look online at websites that specialize in selling camera and camcorder parts, such as B&H Photo and Video or eBay.

I hope this helps! If you have any further questions or if you are having trouble finding the spare parts you need, don't hesitate to ask.

To connect a Charge 3 and a Flip 4, you will need to follow these steps:

1. Make sure that both the Charge 3 and the Flip 4 are turned off.
2. Connect the Charge 3 to a power source using the supplied micro-USB cable.
3. Press and hold the Bluetooth button on the Flip 4 for 5 seconds until the LED starts flashing blue.
4. On the Charge 3, press and hold the volume down and play/pause buttons simultaneously for 5 seconds until the LED starts flashing white.
5. On your phone or other device, go to the Bluetooth settings and look for the Flip 4 in the list of available devices.
6. Select the Flip 4 and follow the prompts to pair the two devices.
7. Once the Charge 3 and the Flip 4 are paired, the LED on the Flip 4 will stop flashing and remain solid blue.

I hope this helps! If you have any further questions or if you are having trouble connecting the Charge 3 and the Flip 4, don't hesitate to ask.

To reset your SDR-H80 camcorder, you will need to follow these steps:

1. Locate the reset button on your camcorder. It is usually located on the side or bottom of the camcorder and is marked with a symbol that looks like a small triangle inside a circle.
2. Press and hold the reset button for a few seconds until the camcorder powers off and on again.
3. Once the camcorder has restarted, it will be reset to its default settings.

I hope this helps! If you have any further questions or if you are having trouble finding the reset button on your camcorder, don't hesitate to ask.

To connect your Canon ZR 800 camcorder to your MacBook Pro using a Firewire connection, you will need a Firewire cable and a Firewire port on your computer. Here are the steps you can follow to connect your camcorder to your MacBook Pro:

1. Locate the Firewire port on your MacBook Pro. It is usually located on the side or back of the computer and is marked with a symbol that looks like a small lightning bolt.
2. Connect one end of the Firewire cable to the Firewire port on your MacBook Pro.
3. Locate the Firewire port on your Canon ZR 800 camcorder. It is usually located on the side or back of the camcorder and is marked with a symbol that looks like a small lightning bolt.
4. Connect the other end of the Firewire cable to the Firewire port on your camcorder.
5. Turn on your camcorder and set it to playback mode.
6. Open the video editing software on your MacBook Pro and choose the option to import video from a Firewire device.
7. Follow the prompts in the software to import the video from your camcorder.

I hope this helps! If you have any further questions, don't hesitate to ask.