Blenders - Page 2 - Answered Questions & Fixed Issues
What is the best blender for making smoothies with frozen fruit?
This looks Spammy, but the answer is Vitamix.Yogurt or liquid first and fruit on top and let rip!A blender is the only machine in your kitchen that can produce a beverage from chunks of ice and fruit in less than 60 seconds. And no other blender we've tested since 2012 can reliably make silky soups, spoon-thick smoothies, and stable emulsifications like the
Vitamix 5200. Yes, this model is pricey, but we think its powerful motor, nuanced controls, and long-lasting reliability make it worth the investment...
8/11/2023 6:32:01 PM •
Blenders
•
Answered
on Aug 11, 2023
•
65 views
Waring Pro MBB Blender- blade too tight
I was just able to fix mine. You'll need the following: two wrenches (almost any type), steel wool, and vegetable oil.
1. Clamp the hexagonal nut inside the bottom of the pitcher with one
wrench and place the jaws of the other wrench between the "spokes" of
the wheel at the outside bottom of the pitcher.
2. Turn either counter-clockwise until the hex nut comes off. At this
point, you should be able to pull the bottom piece out from the bottom.
Pay attention to the order and orientation of the parts inside the
pitcher as they may fall out now.
3. Dry off the shaft and rub it with some ordinary steel wool (think SOS pads).
4. Twist a small amount of the steel wool and run it back and forth through the hole the shaft goes through.
5. Wipe both clean with a clean cloth or napkin.
6. Rub a little vegetable oil on the shaft.
7. Place the shaft back in the hole and test the movement. It should be like new again.
8. Reassemble the blender.
Hope this helps,
John
4/23/2023 4:56:11 PM •
Blenders
•
Answered
on Apr 23, 2023
•
1,144 views
What tool is needed to open the motor casing of a Breville BLR50S Blender?
To open the motor casing of a Breville BLR50S Blender, you will need a screwdriver with a long and narrow shaft that can fit into the recesses where the securing screws are located. A precision screwdriver set with interchangeable bits may work well for this purpose, as it typically includes a range of sizes and shapes of screwdriver tips that can be swapped out as needed.
Alternatively, you may be able to find a specialized tool that is specifically designed for this purpose, such as a long-shafted screwdriver or a tool with a flexible extension that can reach into tight spaces. It may be helpful to consult the user manual or contact Breville customer support for more information on the specific tools needed to open the motor casing of your blender
4/5/2023 7:03:19 AM •
Blenders
•
Answered
on Apr 05, 2023
•
71 views
Ronson on stick blender 8342 motor coupler
If you need a replacement motor coupler for your Ronson 8342 stick blender, there are a few options you can try:
- Check with the manufacturer: Contact Ronson customer support and inquire about the availability of a replacement motor coupler for your specific model of stick blender. They may be able to provide you with a replacement part or direct you to a authorized distributor.
- Check online retailers: Look for online retailers that sell parts for small appliances, such as Amazon or eBay. You may be able to find a replacement motor coupler for your Ronson stick blender.
- Check with local appliance repair shops: Local appliance repair shops may carry the replacement parts you need or have the contacts to help you find them.
It's worth noting that finding replacement parts for old appliances can be difficult and that's why it's always better to check with the manufacturer first.
Also, you might want to have the model and serial number of your stick blender when reaching out to the manufacturer or other suppliers, as it will help them to identify the correct parts for your specific unit.
1/14/2023 4:00:34 PM •
Blenders
•
Answered
on Jan 14, 2023
•
84 views
Not finding what you are looking for?
