Basketball - Popular Questions, Answers, Tips & Manuals

check the bar codes

push on the back board up to get it to lock. Use the catch plate to bring it down.

http://www.instructionsmanuals.com/

The locking teeth or retention spring, if equipped may be damaged and blocked.

I would contact the manufacturer.

Printers are programmed to reject non-genuine ink tanks and toner cartridges. Some of them are also designed/programmed to stop working altogether if you fit an aftermarket product and you will have to get a new printer. Most likely you have one of those. Never use non genuine products. You can try and pull the new genuine OEM toner cartridge out and refit it and see if the machine will reset and recognise it. If not I don't think you are going to get it printing again and you will be up for a new printer.. Follow some of the trouble shooting procedures in the user manual and if none of these work you are probably done with that printer.

As silly and bizarre as this may sound... just take the pole and raise it to shoulder height and throw onto the grass at an angle. It may take a few attempts but the pole WILL come apart. I know you think I'm crazy ...but it does work. It's almost like a Chinese finger trap.

https://m.youtube.com/watch?v=iwguLUWPGDc

It depends on gender and size, but I found a wide variety on eBay.

Should have a union in center of post.

Air brush is best, and least messy.

Go to Home depo or hard where store that sales plumbing pipes. Take one of the pipes with you and match the size to the L joints they have. Spray paint black to match and down. A whole lot cheaper then buying the original L joints.

http://www.atlantahoops.com/pdf/huffy/68454.pdf http://www.atlantahoops.com/pdf/huffy/68454.pdf

I would clear any loose debris, repack around pole with a dry concrete mix then add water to it make sure pole is level, brace if necessary and give 24 hours to set up.

African antelope list kewel, kob, kirks dik, klipspringer and kudu

take it to the store or true it off and take the wire then put it back and then try

Your either going to have buy a new one which I'm sure you want to be a plan Z. With that said, your going to have to weld it at a position that is not adjustable or is possible weld and screw 2 sides where it can move at the broken angle

You need to give us a better picture and description of your problem. It looks like you are working with a basketball goal that is laying down on the ground. Do you really mean only the "Net," or are you using the word net to mean the whole backboard mechanism? Are you talking about hooking the strings of the net to the orange "hoop?"Is this the first time you have tried to raise it, or has something changed after you have used it successfully for awhile? Is this new and you put it together yourself? If so, you probably made a mistake. Review the instructions, or ask a mechanical friend to look at it.Often the answer is easy - its asking the right question that is the hard part! Hopefully you can understand that you have not yet asked us the right question.

you can go online like to ebay or some other dearler ship and search huffy center couter or (backboard) and there you go. Also its cheap