Vehicle Parts & Accessories - Page 3 - Answered Questions & Fixed Issues

The product itself?

Desmocap® 11 A

Covestro AG https://solutions.covestro.com > products > desmocap Desmocap 11 A is a branched polymer with ether and urethane groups; contains crosslinking, blocked isocyanate groups. It is suitable as a raw material for ...

Desmocap 11 A

Covestro AG https://solutions.covestro.com > desmocap > des... Desmocap 11 A is a branched polymer with ether and urethane groups; contains crosslinking, blocked isocyanate groups. It is suitable as a raw material for ... 3 pages

Desmocap® 11 (TDI) - Covestro - Coatings Ingredients

SpecialChem S.A. https://coatings.specialchem.com > product > r-covestr... Desmocap® 11 by Covestro is a solvent-free, high viscosity, branched polymer with ether and urethane groups. It contains crosslinking, blocked isocyanate ...

DESMOCAP® 11 by Covestro - Paint & Coatings

UL Prospector https://www.ulprospector.com > Coatings > Detail > D... A branched polymer with ether and urethane groups; contains crosslinking, blocked isocyanate groups. Used as a raw material in the flexibilisation of epoxy ...

Desmocap 11 - Covestro - Industrial Adhesives and Sealants

SpecialChem S.A. https://adhesives.specialchem.com > product > p-coves... Desmocap® 11 by Covestro is a branched polymer with ether and urethane groups contains crosslinking, blocked isocyanate groups. Has good compatibility with ...

Desmocap® 11 - Adhesives & Sealants

UL Prospector https://www.ulprospector.com > Adhesives > Detail Desmocap® 11 has a viscosity at 23? of 100,000 ± 25,000. It is a branched polymer with ether and urethane groups, used as a raw material for use in the ...

Calibrating a digital pocket scale like the Mega Weigh MGP-1014 ensures that it provides accurate measurements. Here are the general steps for calibrating such a scale: Note: It's important to refer to your scale's user manual for specific instructions, as calibration methods can vary between different models. What You'll Need:

• Calibration weights (these are weights with known, precise values)
• The Mega Weigh MGP-1014 scale
• A clean, stable surface for calibration

Steps:

1. Read the Manual: Familiarize yourself with the user manual that came with the scale. It should provide specific instructions on how to calibrate the scale.
2. Clean the Scale: Ensure that the scale's weighing platform is clean and free from any debris. This helps to prevent interference with the calibration process.
3. Power On: Turn on the scale and wait for it to stabilize, displaying "0.0" or the default reading.
4. Tare (Optional): If your scale has a tare function, you can use it to zero out the weight of any container you plan to use to hold the calibration weights. Place the empty container on the scale and press the tare button.
5. Select Calibration Mode: Many scales have a calibration mode that you need to access. Refer to your user manual to determine how to enter the calibration mode on the Mega Weigh MGP-1014.
6. Add Calibration Weight: Place a calibration weight of a known value onto the scale's platform. The weight should match the unit of measurement you plan to use (grams, ounces, etc.).
7. Calibration Procedure: Follow the specific instructions provided in the user manual to initiate the calibration procedure. This usually involves pressing buttons or following on-screen prompts. The scale will often ask you to confirm the weight value of the calibration weight you added.
8. Confirm or Adjust: The scale should display the weight you added as the calibration weight. Confirm that the displayed weight matches the known value of the calibration weight. If there's a discrepancy, follow the manual's instructions to adjust the calibration setting accordingly.
9. Repeat if Necessary: Some scales require calibration with multiple weights to ensure accuracy across the scale's entire range. If this is the case, follow the manual's instructions for using additional calibration weights.
10. Exit Calibration Mode: Once you've completed the calibration procedure, exit the calibration mode according to the instructions provided in the user manual.
11. Test with Known Items: After calibration, test the scale's accuracy by weighing objects of known weight to ensure that it's providing accurate readings.

Remember that the exact calibration process can vary depending on the scale model, so always refer to the user manual for the most accurate instructions. If you're unsure about any step, it's recommended to contact the manufacturer's customer support for assistance.

If your Suyama MJ7CNA monitor is showing a green light but no display after a power failure, there could be several potential causes for this issue. Here are some steps you can take to troubleshoot and potentially resolve the problem:

1. Check Connections: Make sure that all cables connecting the monitor to the computer are properly connected. Sometimes, cables can become loose during power fluctuations or movement.
2. Power Cycle: Turn off the monitor and unplug it from the power source. Wait for a minute or two, then plug it back in and turn it on. This can help reset any internal components that may have become stuck.
3. Check Other Devices: Connect the monitor to a different computer or device to see if it displays properly. This will help determine whether the issue is with the monitor itself or the computer it was previously connected to.
4. Try a Different Cable: If you have a spare cable, try using it to connect the monitor to the computer. Sometimes, a faulty cable can cause display issues.
5. Check for Display Source: Most monitors have multiple input sources (e.g., HDMI, VGA, DisplayPort). Make sure the monitor is set to the correct input source that matches the cable you're using.
6. Check Computer Settings: If the monitor is working with another device, the problem might be with the computer's settings. Try connecting the computer to a different display to see if the issue persists.
7. Perform a Factory Reset: Some monitors have a factory reset option in their settings. Check the monitor's manual for instructions on how to perform a factory reset, as this can sometimes resolve issues caused by settings conflicts.
8. Inspect for Physical Damage: Check the monitor for any visible signs of physical damage, such as cracks or bent connectors. If you find any, the monitor may need professional repair.
9. Update Graphics Drivers: If the monitor is connected to a computer, ensure that your graphics drivers are up to date. Outdated or corrupted drivers can cause display problems.
10. Test in Safe Mode: Boot the computer into Safe Mode and see if the monitor displays anything. This can help determine if a third-party software or driver is causing the issue.
11. Contact Support: If none of the above steps resolve the issue, it might be time to contact Suyama's customer support or seek assistance from a professional technician. They can provide specific guidance based on your monitor model and situation.

Remember to exercise caution when working with electronic devices, and if you're unsure about any steps, it's best to consult a professional technician.

If your Viper 5706V car alarm and remote start system is displaying error messages and not functioning properly, there could be several reasons for this issue. Here are some steps you can take to troubleshoot the problem:

1. Check the Display: Look closely at the error messages displayed on the remote control or alarm system. These messages can provide valuable information about what might be causing the problem.
2. Check the Wiring: Make sure all the wiring connections are secure and properly connected. Loose or damaged wires can cause communication errors and prevent the system from functioning correctly.
3. Check the Battery: Ensure that the battery in both the remote control and the vehicle is fully charged. Weak batteries can lead to communication problems and errors.
4. Reset the System: Try resetting the Viper system by disconnecting the vehicle's battery for a few minutes and then reconnecting it. This can sometimes clear any temporary glitches in the system.
5. Check Antenna Placement: The antenna for the remote start system should be placed in a location that allows for clear communication between the remote control and the vehicle. Check if the antenna is properly positioned and not obstructed.
6. Review the Manual: Refer to the user manual that came with your Viper 5706V system. It may contain troubleshooting steps and error code explanations specific to your model.
7. Seek Professional Help: If you're unable to resolve the issue on your own, consider seeking assistance from a professional car alarm installer or a Viper authorized dealer. They have the expertise and tools to diagnose and fix complex issues.
8. Update the Firmware: If the system's firmware can be updated, consider updating it to the latest version. New firmware releases often include bug fixes and improvements that could address the error messages you're encountering.
9. Remote Control Programming: Sometimes, error messages can be due to issues with remote control programming. Follow the instructions in the manual to reprogram the remote control to the system.
10. Check Sensor Connections: If your Viper system includes additional sensors or accessories (such as door sensors or motion detectors), ensure that they are properly connected and functioning.

Remember that troubleshooting complex car alarm and remote start systems might require specialized knowledge and tools. If you're not comfortable with the troubleshooting steps or if the issue persists, it's recommended to consult with a professional who is experienced in car alarm and remote start installations.

Sure, it sounds like you're asking about the procedure for changing the oil and filter, as well as checking the oil level, for a Scania R420 with a retarder. Here's a general outline of the process:

1. Gather Materials and Tools:
   • New oil filter
   • Engine oil (recommended grade)
   • Drain pan
   • Socket wrench set
   • Funnel
   • Rag or paper towels
2. Preparation:
   • Park the vehicle on a level surface and engage the parking brake.
   • Let the engine cool down if it has been running recently.
3. Draining the Oil:
   • Locate the oil drain plug at the bottom of the engine oil pan.
   • Place the drain pan underneath the drain plug.
   • Using the appropriate socket wrench, carefully loosen and remove the drain plug, allowing the old oil to drain completely into the pan.
   • Let the oil drain for several minutes to ensure most of it is out.
4. Changing the Oil Filter:
   • Locate the oil filter, which is usually a cylindrical element typically situated near the engine block.
   • Using an oil filter wrench or your hands (if accessible), carefully loosen and remove the old oil filter by turning it counterclockwise.
   • Before installing the new oil filter, lubricate the rubber gasket on the top of the filter with a small amount of fresh engine oil. This helps create a proper seal and makes removal easier during the next oil change.
   • Hand-tighten the new oil filter onto the threaded oil filter housing. Do not overtighten it.
5. Adding New Oil:
   • Consult your vehicle's manual to determine the correct oil capacity and recommended oil grade.
   • Insert a funnel into the oil fill cap, which is usually located on the top of the engine.
   • Slowly pour the recommended amount of new engine oil into the engine using the funnel.
   • Stop pouring periodically to check the oil level using the dipstick.
6. Checking Oil Level:
   • After adding oil, wait a few minutes to allow it to settle in the oil pan.
   • Remove the dipstick from its tube, wipe it clean with a rag or paper towel, and reinsert it fully into the tube.
   • Remove the dipstick again and check the oil level. It should be within the designated range between the "low" and "full" marks on the dipstick.
   • If the level is low, add more oil in small increments and recheck until the level is correct.
7. Final Steps:
   • Reinstall the oil drain plug and tighten it to the manufacturer's specifications.
   • Run the engine for a few minutes to circulate the new oil and then turn it off. Check for any leaks around the oil filter and drain plug.
   • Once again, check the oil level using the dipstick and add more oil if necessary.
   • Dispose of the used oil and oil filter properly at a recycling center.

Remember that these instructions are provided as a general guideline. Always refer to your vehicle's specific owner's manual for accurate and detailed instructions tailored to your Scania R420 with a retarder.

If your Crimestopper SP502 USB remote isn't holding a charge, there could be a few potential reasons for this issue. Here are some steps you can take to troubleshoot and potentially resolve the problem:

1. Check the Battery: Make sure the remote's battery isn't damaged or worn out. If the battery is old or not functioning properly, it might not hold a charge. If possible, replace the battery with a new one and see if the issue persists.
2. Charging Cable and Port: Ensure that you are using a functional charging cable and connecting it to a working USB port. Sometimes, the issue might not be with the remote but with the charging equipment.
3. Cleaning: Sometimes, debris or dirt can accumulate in the charging port of the remote, preventing a proper connection with the charging cable. Gently clean the charging port using a small brush or compressed air.
4. Resetting the Remote: Try performing a soft reset on the remote. This might involve holding down certain buttons or combinations of buttons for a specific duration. Refer to the user manual for your Crimestopper SP502 for instructions on how to do this.
5. Firmware Update: Check if there's a firmware update available for your remote. Sometimes, firmware updates can improve the device's performance and battery life.
6. Contact Customer Support: If none of the above steps work, consider reaching out to Crimestopper's customer support for assistance. They might be able to provide further troubleshooting steps or suggest a solution.
7. Battery Calibration: In some cases, calibrating the battery can help improve its performance. Fully charge the remote, then use it until the battery is completely drained. Repeat this process a couple of times to see if it helps the battery hold a charge better.
8. Replace the Remote: If the remote is still not holding a charge after trying the above steps, it's possible that there's an internal hardware issue. In this case, you might need to consider replacing the remote.

Remember that the specific steps you should take may vary depending on the model of your Crimestopper SP502 remote and the instructions provided in its user manual. If you're uncertain about any step, it's a good idea to refer to the manual or seek assistance from the manufacturer's customer support.

If your sunroof is stuck in the tilt position and seems to be off track, you might be able to troubleshoot and fix the issue on your own. Here's a step-by-step guide to help you address the problem:

1. Check the Owner's Manual: Before attempting any repairs, consult your vehicle's owner's manual for guidance on sunroof operation, troubleshooting, and safety precautions.
2. Check the Fuse: Sunroofs often have a dedicated fuse in the vehicle's fuse box. Check the fuse related to the sunroof and replace it if it's blown.
3. Battery Disconnect: If the sunroof is not responding at all, you might try disconnecting the vehicle's battery for a few minutes and then reconnecting it. This can sometimes reset the sunroof's control module.
4. Inspect for Obstructions: Look around the edges of the sunroof to make sure there are no debris, leaves, or other obstructions preventing it from closing properly. Clear away any debris carefully.
5. Manual Closing: Many sunroofs have a manual override feature. This is usually accessed through a small port in the headliner or by removing a cover near the sunroof controls. Insert the provided tool (usually your vehicle's key) into the manual override and gently turn it to manually close the sunroof.
6. Gently Assist Closure: If the sunroof is partially open, you might be able to gently push it along the track while someone operates the close button. Be very careful not to apply excessive force, as this could damage the mechanism further.
7. Check for Misaligned Tracks: Sometimes, the sunroof tracks can become misaligned. Inspect the tracks for any obvious signs of misalignment or damage. If you're comfortable, you might attempt to reposition the tracks gently.
8. Professional Repair: If none of the above steps work or if you're unsure about performing repairs on your own, it's recommended to take your vehicle to a professional mechanic or a dealership that specializes in your vehicle's make and model. They will have the expertise and tools to diagnose and repair the issue correctly.

Remember that working on your vehicle's sunroof can be tricky, and improper handling could lead to further damage or injury. If you're not confident in your ability to fix the issue, it's best to seek professional assistance.

If you have a 1995 Q45 with a flashing security light and issues with injector not firing, it's possible that you're experiencing a security system-related problem. The security light flashing typically indicates that the vehicle's immobilizer system is active or detecting a potential security threat. The injector not firing could be a result of this security system issue. Here are some steps you can take to troubleshoot the problem:

1. Check the Key: Make sure you are using the correct key for your vehicle. Sometimes, using the wrong key or a damaged key can trigger the security system.
2. Battery Voltage: Check the battery voltage. Low battery voltage can sometimes cause electrical glitches that affect the vehicle's systems. Make sure the battery terminals are clean and securely connected.
3. Spare Key: If you have a spare key, try using it to see if the issue persists. If the spare key works fine, the problem could be with the original key.
4. Security System Reset: Some vehicles have a procedure to reset the security system. This might involve locking and unlocking the doors with the key, or using a specific sequence of actions. Consult your vehicle's manual for instructions on how to perform a security system reset.
5. Anti-Theft System: If the vehicle has an aftermarket anti-theft system installed, it could be causing the issue. You might need to refer to the manual for that system or contact the manufacturer for assistance.
6. Ignition Switch: A faulty ignition switch could prevent power from reaching the injectors. Check if other electrical components are working as they should when the key is turned to the ON position.
7. Fuse and Relay Inspection: Check the fuses and relays related to the fuel injectors and security system. A blown fuse or a faulty relay could be causing the issue.
8. Diagnostic Scan: If none of the above steps resolve the issue, it's advisable to perform a diagnostic scan using an OBD-II scanner. This could help identify any specific error codes related to the security system or fuel injector circuit.
9. Professional Help: If you're unable to diagnose or fix the issue on your own, it's recommended to seek help from a professional mechanic or an auto dealership. They have the necessary tools and expertise to accurately diagnose and repair complex issues.

Remember that working with vehicle electrical systems can be complex, and if you're not comfortable with these troubleshooting steps, it's best to involve a professional to avoid causing further damage to the vehicle.

If your Kenmore model 175.8899 is a common type of appliance like a dishwasher, refrigerator, washing machine, or oven, here are the general steps you might take to use it:

1. Read the Manual: If you have the user manual that came with your Kenmore appliance, it's a great starting point. The manual will provide specific instructions tailored to your model.
2. Power On: For most appliances, there will be a power button or switch that you'll need to turn on. Make sure the appliance is properly plugged into an outlet.
3. Settings and Controls: Depending on the appliance, there might be various settings and controls you can adjust. For example, if it's an oven, you might need to set the temperature and cooking mode. If it's a washing machine, you might need to select the wash cycle and other options.
4. Load the Appliance: Load the appliance with whatever you intend to use it for. For a dishwasher or washing machine, this could be dishes or clothes. Make sure not to overload the appliance, as this could affect its performance.
5. Start the Operation: Once the appliance is loaded and you've set the desired settings, start the operation. This might involve pressing a "Start" button or initiating a specific sequence.
6. Monitor and Wait: While the appliance is operating, keep an eye on it to ensure everything is going smoothly. For appliances like ovens or microwaves, this could involve checking the food periodically. For appliances like dishwashers or washing machines, you might just need to wait until the cycle is complete.
7. Shutdown and Cleaning: Once the operation is complete, turn off the appliance using the power button or switch. For appliances like ovens, make sure to turn them off after use. Additionally, clean the appliance according to the manufacturer's recommendations.
8. Maintenance: Regular maintenance might be required. This could involve tasks like cleaning filters, descaling, or replacing worn-out parts. Check the user manual for guidance on maintenance.

Remember, these are general steps, and your specific Kenmore model 175.8899 might have unique features or steps that aren't covered here. Always refer to the user manual for accurate instructions tailored to your appliance. If you're having trouble or need specific information, you might want to contact Kenmore customer support or refer to their official website for assistance.

It seems like you're dealing with a technical issue related to a Furuno radar array. If the radar array is not spinning and is emitting a beeping sound, there could be several possible reasons for this problem. Here are a few steps you can take to troubleshoot the issue:

1. Check Power Supply: Ensure that the radar array is receiving proper power. Check the power cables, connections, and any fuses that might be relevant. Make sure the power source is functional and providing the correct voltage.
2. Inspect Mechanical Components: If the radar array won't spin, there could be a mechanical issue with the rotating mechanism. Check for any obstructions or debris that might be preventing the rotation. Lubricate any moving parts if necessary.
3. Connection and Wiring: Examine the connections between the radar array and its control/display unit. Loose or damaged cables could cause communication problems and result in the array not spinning. Ensure all connections are secure and undamaged.
4. Software and Configuration: Sometimes, software settings or configuration options can affect the operation of the radar array. Check the user manual or documentation to ensure that the radar is properly configured. Try resetting the settings to default and see if that resolves the issue.
5. Error Codes or Messages: If the radar is emitting beeping sounds, it might be indicating an error condition. Refer to the user manual or any accompanying documentation for a list of error codes or messages and their meanings. This could help pinpoint the problem.
6. Contact Support: If you've tried the above steps and the issue persists, it might be best to contact Furuno's customer support or a qualified technician for further assistance. They can provide more specific guidance based on the model of your radar array and the symptoms you're experiencing.

Remember, working with electronic equipment requires caution to avoid electrical hazards. If you're not comfortable troubleshooting the issue yourself, it's always a good idea to seek professional help.

Good Day to you too. We aren't a group, and we don't have members. We have people asking Questions and Experts answering them. This is the only manual that has wiring and is fairly typical of all Cobra Alarm installation. This is a different model but it does have contact details on the last page. https://www.laps.pt/shopeasy/PDF/01004693.pdf Here is the User Manual for 7928, so it is in your range. https://www.manualslib.com/manual/29160/Cobra-7928.html#manual A quick search shows the company was bought out and they got out of the alarm business.

Vodafone to acquire automotive tech firm Cobra for €145M

Mobile World Live https://www.mobileworldlive.com > home-banner > v... Jun 16, 2014 - Vodafone Group announced plans to acquire Italy-based Cobra Automotive Technologies as it looks to strengthen its hand in the M2M and ... https://www.google.com/search?q=cobra+7925+alarm+manual ..

Service Manual https://www.google.com/search?q=2009+freightliner+columbia+120+service+manual Wiring https://www.google.com/search?q=freightliner+columbia+wiring+diagram https://mhhauto.com/Thread-I-NEED-2008-FREIGHTLINER-COLUMBIA-WIRING-DIAGRAMS ..

How to open WHAT, with What year make model of vehicle? They all have Manuals

Viper Owner's Guides and Manuals

Viper - Car Alarms https://www.viper.com > support > guides Viper Owner's Guides and Manuals ... Viper is the world's best selling vehicle security and remote start brand. We use cutting-edge technology to make sure ... https://www.google.com/search?q=viper+remote+start+manual ..

No I believe this site is for Q and A maybe try redirecting your Question. To " where can I find a dealer for this product" maybe that could get you where you need to be.

The remote and unit lost sync when you replaced the battery. Check your owner's manual for steps to resync the two.