Air Purifiers - Answered Questions & Fixed Issues


Air Purifiers | Answered 8 hours ago | 19 views

which model XL series do you have? There is obviously something shorted or arcing on the plates of the cell. look at the plates and see if they are laying flat and the wires are all still attached across the front of the cell. A loose, sagging, broken or bad contact on the end plates will cause the bad cell lights. clean off the area where the cell makes contact inside the unit. The metal strips that run across the ends of the cell make contact with the plates inside the cell and get their power from them, dirty contacts in any part of these contacts will cause the problem. Even a bad contact from the end cap to the plates inside the cell will cause this. Try wiggling the cell around, kind of push on it on edge to get the plates to shift slightly and clean the points where the plates touch the outer strips on the sides. Check for arcing with the lights turned off,

Oreck XL... | Answered 2 days ago | 4,578 views

Solution, perhaps...

All electrical contacts can get a film on them. Try cleaning the contacts (at the bottom of the blade unit; you should see the three with the blades out) with an alcohol swab (make sure the contacts are dry before reassembly in this case) or a pencil eraser (vacuum the debris out before attempting to start it again).

If those contacts don't make up properly, the unit will think it needs cleaning, even though it doesn't.

Ionic Pro... | Answered 3 days ago | 5,469 views

Its dirty and needs to be cleaned

Air Purifiers | Answered 3 days ago | 25 views

do you have the make and model of the machine?

Air Air... | Answered on Mar 11, 2019 | 36 views

I would verify that all the parts you removed are properly seated back in their exact locations.
There is undoubtably a safety switch that is not properly closed.
A door, a panel, or a latch that is not properly seated and closing the safety switch is probably the cause.

Air Purifiers | Answered on Mar 04, 2019 | 29 views

Thank you for sharing this problem.

Brookstone... | Answered on Mar 03, 2019 | 215 views

Wrong site

Air Purifiers | Answered on Mar 03, 2019 | 133 views

Not finding what you are looking for?
Air Purifiers Logo

Ask a Question

Usually answered in minutes!

Top Air Purifiers Experts


Level 3 Expert

84027 Answers

Michael Youngman
Michael Youngman

Level 2 Expert

249 Answers

Brad Brown

Level 3 Expert

18002 Answers

Are you an Air Purifier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides