Powder spreads on drum in 7535 brother printer. What should i do?. Please help
Your Brother printer model 7535's drum may be getting toner powder on it for a number of different reasons.
You might try the following troubleshooting steps:
Make sure the toner cartridge is seated and correctly put in the printer by checking it.
Toner powder may spread on the drum if the toner cartridge is not placed properly.
Cleaning the drum may be necessary if it is unclean or has toner powder on it.
A clean, lint-free cloth should be used to carefully wipe the drum after opening the printer and removing the toner cartridge.
Avoid touching the drum with your fingers as this may leave a fingerprint that can affect print quality.
Replace the drum: The drum may need to be replaced if it is worn out or damaged.
For information on how to change the drum, consult the documentation or manual that came with your printer.
Go at the printer's settings:
Make sure the printer's settings are configured properly for the kind of paper you are using.
Toner powder may spread on the drum if the printer is configured to use heavy or thick paper.
Tengo una maquina de escribir Brother ML300 y tengo el problema de que no borra las letras. La cinta de borrar es nueva. La tecla de borrar golpea pero no borra- Mi nombre: Miguel Prato
Hola, Miguel.
Si tu m?quina de escribir Brother ML300 no est? borrando las letras correctamente incluso con una cinta de borrar nueva, puede ser que haya alg?n problema con el mecanismo de borrado en s?. Aqu? te dejo algunos pasos que puedes seguir para tratar de solucionarlo:
- Aseg?rate de que la cinta de borrar est? correctamente instalada en la m?quina. Revisa que la cinta est? colocada en la posici?n correcta y que est? bien ajustada.
- Verifica si la tecla de borrar est? obstruida o atascada. A veces, las teclas de borrado pueden quedar bloqueadas por restos de papel o suciedad. Puedes intentar limpiar suavemente la tecla y el mecanismo de borrado para ver si esto soluciona el problema.
- Comprueba si la cinta de borrar est? correctamente ajustada. A veces, si la cinta de borrar no est? ajustada correctamente, puede no funcionar correctamente. Aseg?rate de que la cinta de borrar est? bien tensada y que el mecanismo de borrado la est? tocando correctamente.
- Si los pasos anteriores no solucionan el problema, es posible que haya alg?n problema en el mecanismo de borrado en s?. En ese caso, podr?a ser necesario llevar la m?quina a un servicio t?cnico para su reparaci?n.
Espero que estos pasos te ayuden a solucionar el problema con tu m?quina de escribir Brother ML300. ¡Buena suerte!
3/3/2023 10:16:04 PM •
Brother...
•
Answered
on Mar 03, 2023
I have a brother GX8500 electric typewriter I replace the ribbon and it turns on and everything but I can't type it won't do anything else
If your Brother GX-8500 electric typewriter is not typing after replacing the ribbon, here are a few things you can try:
- Make sure the ribbon is properly installed. Ensure that the ribbon is installed with the correct side facing the platen and that it is threaded properly through the guides.
- Check the print wheel. Make sure the print wheel is properly installed and that none of the spokes are bent or damaged. If the print wheel is damaged, it may need to be replaced.
- Check the correction tape. If your typewriter has a correction tape, make sure it is installed properly and that it is not jammed or tangled. A faulty correction tape can cause typing issues.
- Check the power supply. Make sure the typewriter is properly plugged in and that the power outlet is functioning. You can also try plugging the typewriter into a different outlet.
- Try resetting the typewriter. Some typewriters have a reset button or combination of buttons that can be pressed to reset the machine to its default settings. Refer to the user manual or contact Brother customer support for instructions on resetting your specific model.
If none of these solutions work, it's possible that there may be a more serious issue with the typewriter that requires professional repair.
How do I find the stitch count on a Brother Pacesetter PC-8500D
To find the stitch count on a Brother Pacesetter PC-8500D, follow these steps:
- Turn on your machine and select the embroidery design that you want to check the stitch count for.
- Press the "i" button on the machine to access the information menu.
- Scroll through the information menu until you see the stitch count option.
- Select the stitch count option to display the total number of stitches in the embroidery design.
Note: Some embroidery designs may have multiple color changes or sections, so the stitch count may be broken down by color or section. You can navigate through these options using the arrow keys on the machine.
Where do I find the stitch count on a Brother Pacesetter PC-8500D
To check the stitch count on a Brother Pacesetter PC-8500D embroidery machine, please follow these steps:
- Turn on your machine and select the embroidery mode.
- Press the "Machine Information" key on the touch screen.
- Scroll down to the "Stitch Count" option and select it.
- The stitch count for your machine will be displayed on the screen.
Note: If you have reset the stitch count on your machine, the stitch count displayed will be zero.
How do I remove a stuck toner cartridge from a Brother TN630 printer
If you have a stuck toner cartridge in your Brother TN630 printer, here are some steps you can try to remove it:
Turn off your printer and unplug it from the power source.
Open the front cover and carefully remove the drum and toner assembly.
Locate the release lever on the side of the toner cartridge and push it down.
Try to gently pull the toner cartridge out of the drum unit.
If the toner cartridge is still stuck, try gently wiggling it back and forth while pulling it out.
If the toner cartridge still won't come out, try using a pair of pliers to grip the cartridge and pull it out. Be careful not to damage the cartridge or other parts of the printer.
Once the cartridge is removed, clean any debris or residue from the drum unit and the cartridge itself.
Reinstall the drum and toner assembly back into the printer, making sure it is securely in place.
Close the front cover and plug the printer back in.
Turn on the printer and test if it is working properly.
If these steps do not work, it may be best to contact Brother's customer support for further assistance or to schedule a repair.
Can the Brother MFC-2690DW scan photo slides???
Yes, the Brother MFC-2690DW can scan photo slides. It is capable of scanning a range of documents and media, including photos and slides, in both black and white and color. The Brother MFC-2690DW also comes with a range of software which can be used to automatically adjust the quality of the images and scan them into digital formats such as JPEG or TIFF. Additionally, you can use the Brother MFC-2690DW to scan and digitize slides directly into a computer or other digital device, allowing you to easily store and share your images.
My dog ran past the foot controller and jerked the cord out. Now it reads an error F04 Foot controller breaker. I have tried a different foot controller and still shows the error. Can I fix this?
The error message F04 Foot Controller Breaker likely indicates that the foot controller has shorted out or is no longer functioning properly. Depending on the device you are using, it may be possible to repair it yourself, but in many cases, you will need to send it to the manufacturer for repair or replacement.
If you have tried using a different foot controller and are still seeing the error message, it is possible that the problem is with the device itself, rather than the foot controller. You may want to check the wiring and connections for any visible damage, and make sure that all cables are properly connected and secure.
If you are unable to resolve the issue yourself, it may be best to contact the manufacturer for further assistance. They may be able to provide additional troubleshooting steps or information on how to obtain a repair or replacement.
When I try to print
open the back of the label maker. remove the cartridge. in the lower right hand corner of the where the cartridge fits, there are 3 little posts that are pushed in when you insert the cartridge. find the holes on the cartridge that fit over those posts. cover the holes on the cartridge with tape. reinsert cartridge. try again. worked for me. If you push in the posts individually, you can figure out which one is giving you the error message. I'm not sure that it really makes a difference. I taped over all three holes and it worked fine after that. i realize its not a perfect fix, but may allow you to print anyways!
Not finding what you are looking for?