Broksonic Popular Questions, Answers, Tips & Manuals

A third party direct replacement remote is available here: https://www.remotes.net/products/replacement-remote-for-broksonic-drvcr900 Walmart has a similar remote: https://www.walmart.com/ip/Replacement-Remote-for-BROKSONIC-RT076R0JJ010-076R0JJ010-DRVCR900A-DRVCR900/573348662 . I hope this helps. Cindy Wells

try these: https://www.eliztech.com/remotes/codelists/broksonic-tv-codes

If you wish to get some details; check the site linked here. Pull up older posts. https://elektrotricks.blogspot.com/ https://electronicshelponline.blogspot.com/ faults & possible causes to LCD screen are given with illustrations. You can get an idea about the fault to an extent. Search the site by type in the brand name of your set, in its search bar at the right side column, and press enter. See it in either WebView, or by desktop. MobileView has no search box...

Have a look on the gargler.Google it.

notify manufacturer or online search

Without more details there is only a couple of conclusions - maybe the set top box you have is faulty or incompatible in some way with either the tv or the antenna. Incompatibility with the tv seems unlikely as presumably the on-screen menus generated by the box are displayed satisfactorily - allowing you to select a menu, scroll and select an item and then view the channel seeking process. If this is so it suggests the connection between the box and tv is good. That rather suggests the box is faulty or the antenna is faulty or incompatible.

https://www.youtube.com/watch?v=HLE_Qcy3z50

If you got sound did you connect the yellow plug for video?

Hi Donna, indicate the model of your TV Brokcsonic, to be able to find the best possible solution to your answer You should look for the controls to be able to turn on and off of your TV, by the sides or the bottom of the TV, there are times that are in the back Try the contour of the TV to see if you place it, apart from the control of power on and off, should be those of changing channels, volume, menu and inputs I hope you find the controls, but send me the model of your TV and I will look for the best possible solution Greetings Franco Dosil Hola Donna, indica el modelo de tu TV Brokcsonic, para poder encontrar la mejor soluci?n posible a tu respuesta Deber?as buscar los controles para poder encender y apagar de tu TV, por los costados o la parte inferior del TV, hay veces que se encuentran en la parte posterior Tantea el contorno del TV para ver si lo ubicas, aparte del control de encendido y apagado, deber?an estar los de cambio de canales, volumen, men? y entradas Espero encuentres los controles, sino env?ame el modelo de tu TV y buscare, la mejor soluci?n posible Saludos Franco Dosil

http://schematicscom.blogspot.com/ http://elektrotricks.blogspot.com/ http://electrotechnician.blogspot.com/ http://electronicshelponline.blogspot.com/ http://homenol.blogspot.com/ http://remotesearch.blogspot.com/ Please visit these sites to get some details.

Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. The site has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily. http://homenol.blogspot.com/ http://remotesearch.blogspot.com/ http://electronicshelponline.blogspot.com/ http://electrohelponline.blogspot.com/ Programming Notes • If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote. • Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality. This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device

Not available for a reasonable cost, buy a new TV

You will need to find either a new remote or get a substitute one. I doubt you will be able to access the menus without one.

Firstly the antenna must be good quality, as there is no weak signal with digital. The TV must have a digital tuner or it will need a converter box. Once the antenna is connected and assuming it has a digital tuner. You simply do a full tuning operation and let the set search for channels. If there are regional options it should allow you to select the one you would like.

You can purchase an rca splitter about anywhere for a few bucks. Plug the single end to the t.v. and the other two are obvious. Have a great day

Main system control memory IC fault. This is a very small IC; have 8 solder terminals, and can be located very near to the main system control-chroma IC. Check and replace it. Be sure to replace it with the same number printed on it; in all respect. Otherwise, it won't go. http://electronicshelponline.blogspot.com/ Before replacing it, try a reset to this set, and then check. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here.

Buy an AV cable and connect it at appropriate sockets. What else?

Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. The site has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily. http://remotesearch.blogspot.com/ http://electronicshelponline.blogspot.com/ http://electrohelponline.blogspot.com/ Programming Notes • If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote. • Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality. This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device. Search the site by type in the "brand name" to your device; in the "Search box at the top right of the display window" to get gathered related posts.

Refer its user manual for more details. http://electronicshelponline.blogspot.com/

Check and replace its tuner. Check and replace damaged component/s at its horizontal scan output section circuit. Check the LOT (Line Output Transformer) too for damage. Replace the horizontal scan output transistor. Check the input voltage to LOT. If the voltage is absent check the feeder resistor; if any. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ Type in this key phrase " my service table today " in the search box at the top right of the display window of the home page, to get gathered some pages which has the details of practical experiences of the author of that site.