Boss Music - Page 2 - Recent Questions, Troubleshooting & Support

MICHAEL SCOTT: YOU PASSED ALONG SOME GREAT INFORMATION BUT IT ONLY GETS ME HALFWAY THERE... I HAVE ALL THE NECESSARY CABLES HOOKED UP. DO YOU HAVE TO RECORD MY SONG FROM THE 1180 TO AUDACITY OR WHAT?...THIS IS ALL NEW TO ME AND IT MAY WORK BUT TELL ME HOW TO RECORD FROM THE 1180 TO AUDACITY. THANKS...GEORGE SLADEK

This scan happen when the button part on the switch is `dirty` the carbon inside the touch switch accumulates, its a full strip down and cleaning the circuit board part of the switch with a non solvent alcohol based cleaner.

Hi Not an answer but a repeat of your question. Did you manage gto fix this as I believe my unit may suffer from the same problem. Thanks

https://www.boss.info/us/support/knowledge_base/201977369/ https://www.roland.com/us/support/knowledge_base/201978029/ https://www.boss.info/us/support/knowledge_base/201935139/ choose my answer as helpful if you succeed fix the problem

on there site :) https://www.manualslib.com/manual/927686/Boss-Rc-3.html

Probably needs a new one,if your power ever went out during using your br 900,that might be the issue.

https://www.boss.info/us/support/by_product/me-25/updates_drivers/ https://www.sweetwater.com/sweetcare/articles/usb-midi-device-not-recognized/ https://sourceforge.net/p/me-edit/discussion/1076568/thread/80898582/ https://sourceforge.net/p/me-edit/discussion/1076569/thread/5930eaa9/ https://www.guitarcenter.com/Boss/ME-80-Guitar-Multi-Effects-Pedal.gc

Most likely low power from the power supply. I would check this first.

Ok, solved this problem by visiting roland U.S. site as the help offered in this country is useless. The instructions given by email would not have worked even after the update was installed. Luckily, there are instructions that come with the download. If you have same problem as me go to http://www.rolandus.com/products/productdetails.php?ProductId=772&tab=downloads&skip=true

and update the opperating system on the RC-50 to RC-50 System Update Version 1.01.

Then hold loop sync and phrase 2 button (think it was phrase 2) to change it to sound priority mode. Then it will play back correctly what you recorded on the first loop, rather than missing the first beat.

Am v.happy I have found this, as after much searching I can't find any other loopers out there that offer 3 seperate loop tracks and the ability to switch between them effectively. Plus, it's a very convenient size, better than a load of rackmounted stuff to haul around.

However.....

Another problem..

When hitting the reverse switch ( I assigned both external footswitch and the onboard Tempo pedal to reverse) the change is not instanteaneous. There is a second or so delay before it plays in reverse. Not a problem for most, I suppose, but I have a piece that switches rythmicaly between playing forward and reverse which means hitting a pedal in time and reverse/forwards changing immediately. I think they could do with another software update to solve this. Now I have to keep room in my enormous pedal board for the old rc-20, as that does the reverse as it should - when you hit the flippin switch!

Request directly from manufacturer

https://www.brandsmartusa.com/pdfs/manuals/20175914.pdf Best guess: If you have a usb device plugged in at the same time, the last to be plugged in is played, according to the instruction manual. https://www.brandsmartusa.com/pdfs/manuals/20175914.pdf

I DON'T KNOW

I have this problem with mine. I've did some research and with the boss br 600 this problem can arise quite often .it's caused by a faulty power diode apparently except in that case I've never heard ofrom the screen blinking at all (which my 1600 also does) I wonder I'd this problem can be the same for a br 600 as the br 600

Time to download a tuner app to your phone. Tuners can be fragile and it may not be worth fixing if it's not functioning after a hit or jolt.

Perhaps your computer's sound card is unable to play back at the bit rate and kHz you are recording at on your (mobile?) recorder. I'm not familiar with the RC-50 but if you are recording at 24 bit for example and your computer's sound card is only able to play back at 16 bit it may not reprosuce any sound. Usually you will get an error saying so. Have you tried different playback software?

Make sure you're using the correct power adapter or that the one you have is not malfunctioning. I've experienced Roland/Boss equipment blinking (and restarting over and over) when they are not receiving enough power. Sometimes even the resistance caused by too long of an extension cord can cause this to happen.

I'm not totally familiar with that Boss Digital Audio Workstation but it sounds like what you want to do is record both the music and vocal track at the same time. If that's the case I believe you can push both "Line" and "Mic" input buttons (perhaps not exactly named as such) at the same time to record both simultaneously. Otherwise I would suggest copying the music to it's own stereo track (or two individual tracks, each panned opposite from one another to maintain stereo) and then record your vocal track separately. That way you can record several takes and edit down the best parts to one final track. I hope that helps.

I can do that, but I am in Caracas, Venezuela. Cheers, mate !

Format the media using the recorder. There are some special programs around to convert the data. These proprietary formats are a problem when not formatted on the Micro BR itself.