The temperature control dial of my Bosch Sensixx x DA30 iron has become very stiff to rotate. How to make it easier to turn?
If the temperature control dial of your Bosch Sensixx x DA30 iron has become stiff, you can try the following steps to make it easier to turn:
- Unplug the iron and let it cool down completely.
- Using a soft cloth or sponge, clean the dial and the surrounding area to remove any dust or debris.
- Apply a small amount of WD-40 or silicone spray lubricant to the temperature control dial.
- Slowly turn the dial back and forth a few times to distribute the lubricant and loosen up any dirt or debris that may have been causing the stiffness.
- Wipe away any excess lubricant with a clean, dry cloth.
- Plug in the iron and turn it on to make sure the temperature control dial is turning smoothly.
If the stiffness persists or the temperature control dial is still not turning smoothly, you may need to take your iron to a professional for repair or replacement of the dial.
1/15/2023 1:34:04 PM •
Bosch Irons
•
122 views • 0 helpful votes
Bosch cooktop induction Nit8065uc/01. error code: E1
The E1 error code on your Bosch cooktop indicates that there is an issue with the power supply to the cooktop. This could be caused by a faulty power cord, a faulty power outlet, or a faulty circuit breaker. You should check all of these components to make sure they are working properly. If the issue persists, you may need to contact a qualified technician to diagnose and repair the issue.
Check water light on Bosch dishwasher
i think i would remove the outlet pipe take it to a yard water spicet and pressure blow it out to be sure it's clear then i would check where it connects on both ends to be sure those are clear then put it back together run it one cycle (empty) and see what happens.. it's also possible that the problem is from the screen in the water line going in.. being partially stopped up ... but i'm betting on the drain line.
Bosch washing machine E24
https://www.bosch-home.com/us/experience-bosch/heart-of-the-home/tips-and-tricks/all-articles/e24-error-code
Bosch fridge freezer alarm constantly going off.
The constant beeping could be due to a malfunction or error in the appliance. The first step is to consult the user manual for troubleshooting steps or error codes that might help diagnose the issue. If the manual does not provide a solution, it may be necessary to contact a professional technician for repair.
2/8/2023 4:58:44 PM •
Bosch Garden
•
46 views • 0 helpful votes
Bosch 11264evs green power light comes on upon plugging tool in but tool not functioning in any mode.
Yes, the issue you're describing with the green power light coming on but the tool not functioning could be related to the trigger/switch. A malfunctioning trigger/switch can prevent the tool from operating properly. You may want to test the trigger/switch with a multimeter to see if it is functioning properly. If the trigger/switch is not the issue, it could be with the motor or power supply. In that case, I would recommend reaching out to a professional for repair
2/1/2023 7:51:33 PM •
Bosch Drills
•
51 views • 0 helpful votes
My Bosch dishwasher has a E15 Error.
This is a flood sensor issue rather than a float switch issue. The sensor is in the tray and senses water from dripping hoses or worn pump seals. It doesn't need much water as the sensor is at the lowest point, so it only needs a teaspoon of water. you can check the connections at sensor end and follow it to the control board connector.
My Bosch Dishwasher is displaying an error code E15, what does it mean? An E15 error code indicates that the safety switch has detected water in the base of the dishwasher
. Your leakage protection system has activated.
Videos as well with fixes
https://www.google.com/search?q=bosch+dishwasher+has+a+E15
..
8/21/2022 6:50:55 AM •
Bosch...
•
4,585 views • 0 helpful votes
BOSCH AL1860 CV beeps , not LED ligth and don't carge
If you have checked the fuse and bridge and they appear to be fine, there may be an issue with the charging circuit or the battery. Here are a few things you can try:
Check the battery contacts: Make sure the contacts on both the battery and charger are clean and free of debris. Use a clean, dry cloth to wipe them down if necessary.
Try a different battery: If you have another battery of the same type, try using it with the charger to see if the problem is with the battery or the charger.
Check the charging circuit: Use a multimeter to test the voltage at the output of the charging circuit. If there is no voltage, there may be an issue with the charging circuit itself.
Check the thermal fuse: The charger may have a thermal fuse that can blow if it overheats. Use a multimeter to test for continuity across the thermal fuse. If there is no continuity, the thermal fuse may need to be replaced.
If none of these solutions work, it may be best to take the charger to a professional for repair or replacement.
Bosch gas range no lower ignitor for bake no upper ignitor for broil display is fine no type of error code no other issue any recommendations?
It sounds like there is an issue with the ignition system of your Bosch gas range. The fact that the display is fine, and no error codes are being displayed, suggests that the problem is with the ignition system itself.
- The first thing to check is the ignition switch, it could be faulty and not sending power to the ignition system.
- Check the wiring, it could be loose or corroded preventing power to reach the ignition system.
- The next thing to check would be the spark module, which controls the spark that lights the gas. If the spark module is malfunctioning, it will not send a spark to the ignition system.
- Lastly, the oven and broiler igniters may be faulty and need to be replaced.
It's important to note that working with gas appliances can be dangerous, if you're not comfortable troubleshooting, it's best to contact a professional for repairs or contact Bosch customer service for further assistance. Request for a senior technician or supervisor to take a look at it and provide a resolution.
Regenerate response
No water coming out of hot water taps with a Bosch Water Wizard 10P?
Do you live in a climate where the hot water line could have frozen? If your heater did freeze up, that could be very bad. This is because water actually expands when it freezes and can do a lot of damage to pipes and to the water heater itself. My other thought is possibly a clogged in line water filter. But typically a clogged water filter would make it run with reduced pressure rather than a complete shutdown all water flow.
Not finding what you are looking for?