Bosch Dishwashers - Page 5 - Recent Questions, Troubleshooting & Support


PERHAPS GLUE OR POP RIVETS . I HAVE NOT SEEN IT

Bosch... | Answered on Apr 07, 2019


Try cleaning the pressure chamber and sump hose, if not this , it is not heating ( heater or pcb)

Bosch... | Answered on Apr 03, 2019


The cycle timer may be defective.

Bosch... | Answered on Mar 31, 2019


Many owners of the Bosch dishwashers perceive h01 (h: 01) or h02 (h: 02) and other signs as an error. But in fact, this is not an error, and you accidentally got into the start-up timer menu (delayed start of washing dishes). In this case, h01 means that washing dishes will start exactly in 1 hour; if the display shows h02, then washing process will begin exactly in 2 hours. As a rule, in most models of dishwashers from Bosch, a delayed start can be set in the range from 1 to 24 hours.
Read more at https://bosch-dishwasher-errors.com/bosch-dishwasher-error-code-h01-h02/#uGUAe8vpcVfLM3YX.99

Bosch... | Answered on Mar 19, 2019


E15 fault is water into base and has activated the anti flooding device.
You will need to remove the water from base and investigate for leaks.

Bosch 24 in.... | Answered on Mar 18, 2019


The symbol you're describing is saying the salt tank is empty. Normally on this model if the dispenser isn't opening it's because it's not heating, the dispenser is triggered when it reaches a set temperature

Bosch... | Answered on Mar 14, 2019


most bosch dishwashers have a filter that can be removed and cleaned at the bottom of the tub check filter to see if it is dirty. if the filter is clean make sure your water is hot enough min 120 degrees at faucet may want to run hot water at sink before starting dishwasher

Bosch Integra®... | Answered on Mar 09, 2019


A NEW CONTROL BOARD MIGHT BE IN ORDER

Bosch... | Answered on Mar 07, 2019


When I start a new cycle, I first hear the pump run to empty out all remaining water, and after that I hear the motor run for the regular washing cycle, but there is no water in the dishwasher. After a few minutes, the cycle stops, and the washer claims the dishes are 'clean'. When I try starting a new cycle over and over again, about one in 20 times, the cycle will run normally with water. But then the next time, the problem starts all over again. Once a cycle starts correctly, everything works fine, including the rinsing.

Bosch SHX5AL02UC... | Answered on Mar 06, 2019


Door lock is jammed on , take front panel and console panel off , with a screwdriver, flick door lock mechanism to open, spray with wdr0 and it should work

Bosch... | Answered on Mar 04, 2019


Contact Bosch directly and request side mounting instructions for model shem63w55n.

Bosch... | Answered on Feb 26, 2019


  • Defective switch
  • Defective control board

Bosch... | Answered on Feb 20, 2019


WHAT DOES THE OPERATORS MANUAL SAY

Bosch... | Answered on Feb 18, 2019

Not finding what you are looking for?
Bosch Logo

7,055 questions posted

Ask a Question

Usually answered in minutes!

Top Bosch Dishwashers Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

jimorris77

Level 3 Expert

411 Answers

Are you a Bosch Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...