Bosch Dishwashers - Page 2 - Recent Questions, Troubleshooting & Support


Order the manual from Bosch.

Bosch... | Answered on Aug 27, 2019


Google (krups)(model)(manual) without parens OR contact Krups directly to request it. Note: -00 series 50 decibel is not the model.

Bosch... | Answered on Aug 26, 2019


Hi
Pump-out not accomplished in normal time.
Check the drainage and replace or reposition the drain hose,Clean it out by running the disposer.

Bosch... | Answered on Aug 17, 2019


It means that water is not getting to the dishwasher. Make sure your water valve is turned on all the way. If that's okay, then maybe your water supply hose got kinked when you pushed the dishwasher back in it's place. As a final check, turn off the water, disconnect the water supply hose at the dishwasher, and with the end of the hose sticking in a tall bucket, turn the water valve back on. You should have a good strong flow. If not, then your water valve (under the sink) is bad, and you will probably need to call a plumber, because the problem is not in your dishwasher.

Bosch... | Answered on Aug 17, 2019


Hello there and welcome to fixya The child lock function of your Bosch dishwasher prevents accidental program changes and stops children playing with the controls while the appliance is running. You might want to turn the lock off if it has been accidentally turned on. The controls of the dishwasher are disabled, preventing you from starting a new wash, while the child lock is running. The lock is simple to turn on and off, as necessary, in just a few seconds
Read more: How to Get the Child Lock off a Bosch Dishwasher ' eHow.com http://www.ehow.com/how_12069321_child-lock-off-bosch-dishwasher.html#ixzz2E7bFXnhs

please feel free to give me a rating if this works for you it helps me give you the best help i possiabley can ok
Best regards Mike

Bosch SHU9915UC... | Answered on Jul 25, 2019


This is a common fault and apart from trying silicone sealant , it is beyond repair

Bosch... | Answered on Jul 12, 2019


Check that the new panel isn't pushing down on any of the buttons when you reassemble it. Compare it with the old panel and look closely for any differences. Ive come across it a few times where changes to panels have been made and its supplied to fit yours but the changes prevent correct operation. You may have to file or cut any part off which interferes with the switches or controls. This happens when there are production line changes on the same models.

Bosch... | Answered on Jun 16, 2019

Not finding what you are looking for?
Bosch Logo

7,055 questions posted

Ask a Question

Usually answered in minutes!

Top Bosch Dishwashers Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

jimorris77

Level 3 Expert

411 Answers

Are you a Bosch Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...