E46 2002 showing ppppp on
Hey
How du i mount my tacho rings in my instrumentpanel.
my car is an BMW 318i E46 from 2002
10/29/2023 8:51:42 PM •
1997 BMW 318
•
Answered
on Oct 29, 2023
•
1,006 views
2003 BMW X5 4.4 no crank no start
Check the basics first. Is battery fully charged? This is the most common reason for a no crank, no start. What exactly does it do when you turn the key? Nothing at all, no lights, no 'click' as you turn the key. A slow lazy crank?
9/19/2023 7:07:00 PM •
BMW Cars &...
•
Answered
on Sep 19, 2023
•
61 views
Calibrate a mega weigh mgp-1014 digital pocket scale
Calibrating a digital pocket scale like the Mega Weigh MGP-1014 ensures that it provides accurate measurements. Here are the general steps for calibrating such a scale:
Note: It's important to refer to your scale's user manual for specific instructions, as calibration methods can vary between different models.
What You'll Need:
- Calibration weights (these are weights with known, precise values)
- The Mega Weigh MGP-1014 scale
- A clean, stable surface for calibration
Steps:
- Read the Manual: Familiarize yourself with the user manual that came with the scale. It should provide specific instructions on how to calibrate the scale.
- Clean the Scale: Ensure that the scale's weighing platform is clean and free from any debris. This helps to prevent interference with the calibration process.
- Power On: Turn on the scale and wait for it to stabilize, displaying "0.0" or the default reading.
- Tare (Optional): If your scale has a tare function, you can use it to zero out the weight of any container you plan to use to hold the calibration weights. Place the empty container on the scale and press the tare button.
- Select Calibration Mode: Many scales have a calibration mode that you need to access. Refer to your user manual to determine how to enter the calibration mode on the Mega Weigh MGP-1014.
- Add Calibration Weight: Place a calibration weight of a known value onto the scale's platform. The weight should match the unit of measurement you plan to use (grams, ounces, etc.).
- Calibration Procedure: Follow the specific instructions provided in the user manual to initiate the calibration procedure. This usually involves pressing buttons or following on-screen prompts. The scale will often ask you to confirm the weight value of the calibration weight you added.
- Confirm or Adjust: The scale should display the weight you added as the calibration weight. Confirm that the displayed weight matches the known value of the calibration weight. If there's a discrepancy, follow the manual's instructions to adjust the calibration setting accordingly.
- Repeat if Necessary: Some scales require calibration with multiple weights to ensure accuracy across the scale's entire range. If this is the case, follow the manual's instructions for using additional calibration weights.
- Exit Calibration Mode: Once you've completed the calibration procedure, exit the calibration mode according to the instructions provided in the user manual.
- Test with Known Items: After calibration, test the scale's accuracy by weighing objects of known weight to ensure that it's providing accurate readings.
Remember that the exact calibration process can vary depending on the scale model, so always refer to the user manual for the most accurate instructions. If you're unsure about any step, it's recommended to contact the manufacturer's customer support for assistance.
8/9/2023 10:23:47 AM •
760Li Brief...
•
Answered
on Aug 09, 2023
•
188 views
Suyama mj7cna monitor no display after power cut
If your Suyama MJ7CNA monitor is showing a green light but no display after a power failure, there could be several potential causes for this issue. Here are some steps you can take to troubleshoot and potentially resolve the problem:
- Check Connections: Make sure that all cables connecting the monitor to the computer are properly connected. Sometimes, cables can become loose during power fluctuations or movement.
- Power Cycle: Turn off the monitor and unplug it from the power source. Wait for a minute or two, then plug it back in and turn it on. This can help reset any internal components that may have become stuck.
- Check Other Devices: Connect the monitor to a different computer or device to see if it displays properly. This will help determine whether the issue is with the monitor itself or the computer it was previously connected to.
- Try a Different Cable: If you have a spare cable, try using it to connect the monitor to the computer. Sometimes, a faulty cable can cause display issues.
- Check for Display Source: Most monitors have multiple input sources (e.g., HDMI, VGA, DisplayPort). Make sure the monitor is set to the correct input source that matches the cable you're using.
- Check Computer Settings: If the monitor is working with another device, the problem might be with the computer's settings. Try connecting the computer to a different display to see if the issue persists.
- Perform a Factory Reset: Some monitors have a factory reset option in their settings. Check the monitor's manual for instructions on how to perform a factory reset, as this can sometimes resolve issues caused by settings conflicts.
- Inspect for Physical Damage: Check the monitor for any visible signs of physical damage, such as cracks or bent connectors. If you find any, the monitor may need professional repair.
- Update Graphics Drivers: If the monitor is connected to a computer, ensure that your graphics drivers are up to date. Outdated or corrupted drivers can cause display problems.
- Test in Safe Mode: Boot the computer into Safe Mode and see if the monitor displays anything. This can help determine if a third-party software or driver is causing the issue.
- Contact Support: If none of the above steps resolve the issue, it might be time to contact Suyama's customer support or seek assistance from a professional technician. They can provide specific guidance based on your monitor model and situation.
Remember to exercise caution when working with electronic devices, and if you're unsure about any steps, it's best to consult a professional technician.
8/9/2023 10:22:34 AM •
760Li Brief...
•
Answered
on Aug 09, 2023
•
135 views
1994 BMW 318i have one key only. The key slides in ignition won't start.
Question edited to what I think, you thought you were saying :>D
Question moved to model category.
All vehicles need 2 good keys.
I don't suppose you have a way of testing the battery voltage? It is drops below 11 volts, nothing works the way It should, including removing the key on a vehicle that is an automatic.
You have the symptoms of a car alarm and immobilizer stopping it starting. After disconnecting the battery, it definitely need resetting. You need a mobile auto locksmith you cut you a new key and program both keys to make it start. People always think they only need one key because they are careful and won't lose it. Then they do and you either pay dealership prices for a key to be made based on the VIN number, or you buy a new lock and keys and have the hassle of fitting it and reprogramming it.
https://www.google.com/search?q=auto+locksmith+near+me
..
Not finding what you are looking for?