Bertazzoni Ovens - Page 2 - Recent Questions, Troubleshooting & Support

The F2 error code on a Touchstone electric fireplace typically indicates an issue with the temperature sensor or the thermostat.

Contact the maker. It sounds like the new thermostat is faulty. https://www.google.com/search?q=Elmira+Northstar+1956B+inconsistent+temp ..

Press the button. All range ovens have a button on the control panel. 'make model (what it is)' in all questions, first 3 words please. ..

All the grams in the link https://www.google.com/search?q=oven+wording+gram all questions need full 'make model (what it is)' and a coherent question please. ..

press the buttons 4 buttons shown below all at the same time

Watch this video abour self cleaning oven and read some interesting information about this procedure Clean Your Self Cleaning Oven Kitchen Appliance Cleaning Ideas Fast Easy... Why You Should Almost Never Use Your Oven Self Cleaning Function Stop Using Your Ovens Self Cleaning Feature It Does More Harm than Good Self Cleaning Oven Instructions https://en.wikipedia.org/wiki/Self-cleaning_oven

It helps to have full 'make model (what it is)'! Electrolux Steam Oven? https://www.google.com/search?q=error+code+efup ..

It helps to have FULL make and model, but here are a few. F7 error code can be a result of a faulty wire harness (short-circuit), defective heating elements or oven sensor. A qualified service technician will need to have a look, determine faulty part then replace or repair it.Apr 27, 2023

Help library: Electric Range: "F-7" error code - troubleshooting

What is the wiring colour code of the oven switch

The F15 error code on a Fulgor Milano oven typically indicates a problem with the temperature sensor or the wiring between the sensor and the control board. Here are some steps you can take to troubleshoot and fix the issue:

1. Turn off the oven and unplug it from the power source.
2. Locate the temperature sensor, which is usually located near the top of the oven cavity and is a small metal rod protruding from the wall.
3. Check the sensor for any visible damage, such as frayed wires or a bent or broken sensor.
4. Use a multimeter to test the resistance of the sensor. The sensor should read between 1000-1100 ohms at room temperature. If it is outside of this range, it will need to be replaced.
5. Check the wiring between the sensor and the control board for any visible damage or loose connections. If there is any damage or loose connections, repair or replace the wiring as necessary.
6. If the sensor and wiring appear to be in good condition, the problem may be with the control board. In this case, the control board may need to be replaced.

If you are not comfortable performing these troubleshooting steps yourself, it may be best to contact a professional appliance repair technician for assistance.

If your Gordon Bleu oven's element stays red after turning off, check the thermostat, control knob, and thermal fuse. If issues persist, seek professional help for a safe and effective solution.

I find it strange that this make and model does not exist. https://www.google.com/search?q=Samet+N99VIX+manual ..

You need a new heating element. Check it for continuity with a digital multimeter. https://www.google.com/search?q=Samet+oven+model+N99VIX No manual, they appear to be a kitchen cabinet manufacturer https://www.google.com/search?q=Samet+N99VIX+manual ..

It is possible, old plate have larger capacity i.e. wattage and new plates have lower wattage. Did you replace same value plates ?

No if the fan isn't working it has likely failed. They work in a very hostile atmosphere. Check continuity with a digital multimeter. Another possibility is that the contacts have come loose. A reset would be simply disconnecting it from mains power for 15 minutes. ..

Call for service. Both of those items could have been tested with a digital multimeter in less than a minute each. Please never change items based on guesswork, test and then replace if failure is detected. The next item up the chain of command is the Control Board and they are very expensive and always need professional diagnosis so you get the warranty on the part and on the job itself. Full 'make model (what it is)' in all questions, first 3 words please ..

Unknown if this link will help you fix it. https://www.boilerguide.co.uk/manufacturers/ferroli/error-codes Quoting from link: F34 Supply voltage under 170V - electric mains error

"not working" is a bit vague, especially without full make and model'. https://www.google.com/search?q=simpson+saturn+oven+not+working I hope you have a barbeque or a deep fryer for the turkey. ..