Belkin Components Computers & Internet - Recent Questions, Troubleshooting & Support

This post is dedicated to describing the process of fixing an orange light on a Belkin router. But, first, it's important to know about the reason for the orange light. The orange light on the brilliantly-designed Belkin router provides an indication that either the particular connection had not been developed or the router is not capable of detecting the Internet. It might be due to the defected router, unplugged modem, and so forth.

call time warner cable and they can help you set it up for free.

Chip - had a similar problem myself. What I did was setup a wireless repeater in my home. There are a variety of products out there that will fit your needs - a simple 'wireless repeater' search on Amazon or Google will provide you with various equipment to use (costs ranging from $50 to $200 - get the best you can afford that will over you the range extension you are looking for). Once the repeater is setup and connected to your primary router (via wireless), your Kindle should see the device. One other point of note. I have used the Belkin @TV for a while now and tried it on a variety of different devices including the Kindle. I find that the Kindle performance wise isn't as good as an iPad or Laptop - just a heads up on that.

If you don't want to use the setup CD you can manually enter it and make changes. Here a video I made of me setting up my F9K1003V1

G'day try 1234 Cheers Greg.

The Router address for Belkin is 192.168.2.1 However Belkin C45 is not a wireless router :) Regards Rakesh Warrier http://facebook.com/quietmouse89

there are several ways of doing this. too many to show. i have know some people to extend the ranger for miles. line of site is the key.

Most times if you reset the unit, it will have admin/admin as the id/pw combo. If not, search the web for an instruction manual. Most times finding the reset button and pressing it for a few seconds will restore the unit to factory conditions. The resets are generally behind a hole the diameter of a paper clip on the back or bottom of the router.

It depends on what you are reading it on. If you are reading on a computer, use the up/down arrow keys or your wheel on the mouse. If it is on a touch screen (tablet or smartphone), you might try touching the bottom corner of a page and sliding your finger to the left as if you were flipping a page on a paperback.

this might help Belkin Drivers Download Center

Replace it, the unit has taken a surge.

The best route to take is to obtain another adapter for the mouse since it was wireless. However, if the mouse and your computer have Bluetooth capabilities then you can connect by Bluetooth.

You need to contact Belkin on line. They can run you through the process while on the internet and guide you through the steps one by one.

1. Click Start , click All Programs, and then click Accessories.
2. Right-click Command Prompt, and then click Run as Administrator. If you are prompted for an administrator password or confirmation, type the password or provide confirmation.
3. At the command prompt, type the following command, and then press ENTER: netsh interface tcp set global autotuninglevel=disabled This command disables the Receive Window Auto-Tuning feature.
4. Close the Command Prompt window.
5. Restart the computer.
6. Also try here

How to Fix Local Only or Limited Connectivity in Vista