Belkin Computers & Internet - Page 8 - Recent Questions, Troubleshooting & Support

If your modem/router has a USB connectivity, you can connect it via USB. Else you will have to buy an Ethernet PCI Card, which wont cost you much.
I hope this solves your problem. Good Luck ! Kindly Accept my Solution.
Regards, Arjun

HI Gilbert,

Can i have the brand name of the modem , Your Internet service provider name , so that we can configure the router with using the CD.
We have another method to configure the router that is manual configuration method.

Thanks & Regards,
prema

If you are asking what the default credentials are to log into the admin panel of the router, then the options are below. Default usernames: admin, Admin, [blank] Default passwords: admin, password, [blank] If you are asking for the Wi-Fi password, that is unique to the user who initially set it up. You can reset the router but following the manufacturer instructions and holding the reset button down in the back. This will erase all settings on the router.

There is no way we can know your password.

please call the technician or search online help for better help.don't open the device if you don't know anything about that. for any other further information or router help, you can contact us on Belkin Router Customer Service.

https://www.google.com/search?safe=off&client=firefox-b-1-ab&ei=fyIgW6yLDcHUjwTNk6jgCg&q=Manual+For+A+Belkin+4+Port+USB+Hub&oq=Manual+For+A+Belkin+4+Port+USB+Hub&gs_l=psy-ab.3..0i22i30k1.29263.29263.0.29604.1.1.0.0.0.0.304.304.3-1.1.0....0...1..64.psy-ab..0.1.303....0.zoLPEjY6M1k

Either get the original setup disc to do it or you have to get the IP address of your router and type it into a web browser on your computer. The login for your router to get into its interface may be on the bottom of your router or google the specific Belkin model to find it. Then you will have an area with your WiFi and guest WiFi info you can change.

If the green light is one of the port lights, then your network is switching into 10mbs (Orange = 10mbs, Green = 100mbs) - it may be a dodgy cable but more likely a faulty network card in your PC.

It could be the proxy or firwall setting in the router.
you need to open the router page and check the firewall and proxy setting ..

or you can download the tool from the below site
www.ultrareach.com/
and it will take off all proxy setting and you winows messenger should work.

This should help you identifing if its a proxy issu.

THanks & all the best

Some routers won't allow wireless repeating (which I think is what you are trying to do). Some powerline adapters would be the easiest way to solve this as they work through your electrical cables. Plug one in where you already have a network connection and the other where you want it. You can then connect the cable to the N300 (provided it has multiple ethernet ports) and then connect the rest of your devices to the remaining ports. You'll need to do some googling to configure the router correctly.

assuming you are connecting wirelessly; you may have to check that the router is allocating ip addresses automatically to your pc's. connect one of your pc's to the router via the RJ45 network cable that was supplied and not wirelessly and type 192.168.2.1 in your internet browser, this will take you into the routers setup menu. Look for a menu refering to 'DHCP' and make sure that this is enabled, then look for the channel number that the router is using (normally 6 or 11) and make a note as if you are still experiencing signal loss, you can get back into the router and change to any channel between these numbers incase you are getting appliances interfering with the signal, save and exit from the router menu. disconnect the cable then go to control panel, network connections and right click on the connection you are using whether it is wired or wireles and click on properties. Look for the line TCP/IP and again click on the line and select properties, then make sure automatically obtain ip address is selected, ok and close window. Restart the pc's and you should have a connection.

Hi i got your issue ......

PLease go to this link and check www.belkin.com/support and you can download....

If you still have any queries contact 24/7 belkin technical support 1800-2235546
Thanks.....
With regards ......
Priya ,,,,,

A procedure I found using http://www.google.com http://www.belkin.com/us/support-article?articleNum=117730 Having trouble pairing the Belkin F5L171 and F5L176 with your iPad Air

Steps to find a WEP key:

1. Open a browser (the program used to access the internet).

2. Type the following into the address bar of the browser. If using a Belkin router type "192.168.2.1". The address bar is the area where webpages are typed. It is important when typing in that there is NO www. before the numbers, but do put http://

3. If all has gone well this should open a page that says Belkin.

3. There may be the need to login. When using a Linksys if you don't know what the username and password are it may still be the factory settings, and so enter in "admin" for the username and "password" for the password. If using a Belkin router, the factory settings often come with no password, so just click submit without typing in a password.

4. Click on a) "Wireless" or b) "settings".

5. Click on a) "Wireless security" or b) "wireless settings".

6. There should be a page with a WEP key listed.

7. Write it down/copy and use as you wish!

Make sure that you successfully paired dingle with mouse.

http://www.belkin.com/uk/support-article?articleNum=4998

That's been a problem for years. Sleep mode turns off USB devices, and they seldom wake when the computer is activated again. To make sure this isn't the problem, you can

• Go into Device Manager and under each USB Device, Power tab, disable "Let this device turn off to save power".
• Edit Sleep Mode to not control USB devices.
• Don't use Sleep Mode.
• Unplug the adapter, wait a few seconds, plug in the adapter.

If none of these help, try a self-powered hub. The internal power supply lets you use about 500ma for each USB device, but some draw more current than that. The self-powered hub can deliver what's actually needed for the devices.

sounds like you have to reset the router and put in your info again as when it was new ...

1. Take a Ethernet cable and connect your modem from internet port of the belkin router and power on your modem.
2. Take another Ethernet cable and connect your computer from Anyone empty Ethernet port of the belkin router. (if you have laptop then you may connect your laptop using wireless facility. You will find the username and password in the back of your router) .
3. Now you need to power on your modem and wait for all lights to turn into green or blue lights. If all you have yellow light on your router. Then you need to restart your modem and wait for 2 minute. For more information you can visit : Belkin Router has solid orange light
4. If you have solid green light on your belkin router, you need to go to your computer and open your browser.
5. At the very top address bar you need to type the ip address 192.168.2.1 for opening the router setup page. (Sometimes the ip address may be different, you can check the router's ip address via running the ipconfig)
6. Now you will be able to see belkin router setup page, so you need to click on detect my connection.
7. If your computer will able to detect the connection properly then this will forward you to the wireless setup page. Here this will ask you to change the password (If you want) and click on next.
8. Finally you will able to see all configurations window, so you need to check all configuration and click on save and continue to save all settings on your router. Now you belkin router will reboot and this will show you router admin page.

Finally your belkin router will setup and you will able to use the internet. you may try to connect the devices, whatever you want to connect with it.

http://www.belkin.com/us/support-article?articleNum=7986 If they are charging that much for support I would return it anyway. Get a Netgear router

Disconnections are generally relative to the Internet Provider and Speed. If the speed drops, the router can disconnect and reboots. Just make certain you always update all drivers and especially if you are in Windows, keep up with current updates. Check your device drivers and do update from there also.